Longitudinal Study of Reproductive Performance of Female Cattle Produced by Somatic Cell Nuclear Transfer

The objective of this study was to determine whether or not reproductive performance in cattle produced by somatic cell nuclear transfer (SCNT) is significantly different from that of their genetic donors. To address this question, we directed two longitudinal studies using different embryo production procedures: (1) superovulation followed by artificial insemination (AI) and embryo collection and (2) ultrasound-guided ovum pick-up followed by in vitro fertilization (OPU-IVF). Collectively, these two studies represent the largest data set available for any species on the reproductive performance of female clones and their genetic donors as measured by their embryo production outcomes in commercial embryo production program. The large-scale study described herein was conducted over a six-year period of time and provides a unique comparison of 96 clones to the 40 corresponding genetic donors. To our knowledge, this is the first longitudinal study on the reproductive performance of cattle clones using OPU-IVF. With nearly 2,000 reproductive procedures performed and more than 9,200 transferable embryos produced, our observations show that the reproductive performance of cattle produced by SCNT is not different compared to their genetic donors for the production of transferable embryos after either AI followed by embryo collection (P = 0.77) or OPU-IVF (P = 0.97). These data are in agreement with previous reports showing that the reproductive capabilities of cloned cattle are equal to that of conventionally produced cattle. In conclusion, results of this longitudinal study once again demonstrate that cloning technology, in combination with superovulation, AI and embryo collection or OPU-IVF, provides a valuable tool for faster dissemination of superior maternal genetics.     

Adaptive Mutations in the V3 Loop of gp120 Enhance Fusogenicity of Human Immunodeficiency Virus Type 1 and Enable Use of a CCR5 Coreceptor That Lacks the Amino-Terminal Sulfated Region

To identify sites in gp120 that interact with the CCR5 coreceptor and to analyze the mechanisms of infection, we selected variants of the CCR5-dependent JRCSF molecular clone of human immunodeficiency virus type 1 (HIV-1) that adapted to replicate in HeLa-CD4 cells that express the mutant coreceptor CCR5(Y14N) or CCR5(G163R), which were previously shown to bind purified gp120-CD4 complexes only weakly. Correspondingly, these mutant CCR5s mediate infections of wild-type virus only at relatively high cell surface concentrations, demonstrating a concentration-dependent assembly requirement for infection. The plots of viral infectivity versus concentration of coreceptors had sigmoidal shapes, implying involvement of multiple coreceptors, with an estimated stoichiometry of four to six CCR5s in the active complexes. All of the adapted viruses had mutations in the V3 loops of their gp120s. The titers of recombinant HIV-1 virions with these V3 mutations were determined in previously described panels of HeLa-CD4 cell clones that express discrete amounts of CCR5(Y14N) or CCR5(G163R). The V3 loop mutations did not alter viral utilization of wild-type CCR5, but they specifically enhanced utilization of the mutant CCR5s by two distinct mechanisms. Several mutant envelope glycoproteins were highly fusogenic in syncytium assays, and these all increased the efficiency of infection of the CCR5(Y14N) or CCR5(G163R) clonal panels without enhancing virus adsorption onto the cells or viral affinity for the coreceptor. In contrast, V3 loop mutation N300Y was selected during virus replication in cells that contained only a trace of CCR5(Y14N) and this mutation increased the apparent affinity of the virus for this coreceptor, as indicated by a shift in the sigmoid-shaped infectivity curve toward lower concentrations. Surprisingly, N300Y increased viral affinity for the second extracellular loop of CCR5(Y14N) rather than for the mutated amino terminus. Indeed, the resulting virus was able to use a mutant CCR5 that lacks 16 amino acids at its amino terminus, a region previously considered essential for CCR5 coreceptor function. Our results demonstrate that the role of CCR5 in infection involves at least two steps that can be strongly and differentially altered by mutations in either CCR5 or the V3 loop of gp120: a concentration-dependent binding step that assembles a critical multivalent virus-coreceptor complex and a postassembly step that likely involves a structural rearrangement of the complex. The postassembly step can severely limit HIV-1 infections and is not an automatic consequence of virus-coreceptor binding, as was previously assumed. These results have important implications for our understanding of the mechanism of HIV-1 infection and the factors that may select for fusogenic gp120 variants during AIDS progression.     

A Chemical and Enzymatic Approach to Study Site-Specific Sumoylation

A variety of cellular pathways are regulated by protein modifications with ubiquitin-family proteins. SUMO, the Small Ubiquitin-like MOdifier, is covalently attached to lysine on target proteins via a cascade reaction catalyzed by E1, E2, and E3 enzymes. A major barrier to understanding the diverse regulatory roles of SUMO has been a lack of suitable methods to identify protein sumoylation sites. Here we developed a mass-spectrometry (MS) based approach combining chemical and enzymatic modifications to identify sumoylation sites. We applied this method to analyze the auto-sumoylation of the E1 enzyme in vitro and compared it to the GG-remnant method using Smt3-I96R as a substrate. We further examined the effect of smt3-I96R mutation in vivo and performed a proteome-wide analysis of protein sumoylation sites in Saccharomyces cerevisiae. To validate these findings, we confirmed several sumoylation sites of Aos1 and Uba2 in vivo. Together, these results demonstrate that our chemical and enzymatic method for identifying protein sumoylation sites provides a useful tool and that a combination of methods allows a detailed analysis of protein sumoylation sites.     

Methylene amine substituted arylindenopyrimidines as potent adenosine A2A/A1 antagonists

A novel series of arylindenopyrimidines were identified as A_2A and A₁ receptor antagonists. The series was optimized for in vitro activity by substituting the 8- and 9-positions with methylene amine substituents. The compounds show excellent activity in mouse models of Parkinson’s disease when dosed orally.     

Influence of an Acrylic Polymer Blend on the Physical Stability of Film-Coated Theophylline Pellets

The purpose of this study was to investigate the physical stability of a coating system consisting of a blend of two sustained release acrylic polymers and its influence on the drug release rate of theophylline from coated pellets. The properties of both free films and theophylline pellets coated with the polymer blend were investigated, and the miscibility was determined via differential scanning calorimetry. Eudragit^® RS 30 D was plasticized by the addition of Eudragit^® NE 30 D, and the predicted glass transition temperature (T _g) of the blend was similar to the experimental values. Sprayed films composed of a blend of Eudragit^® NE 30 D/Eudragit^® RS 30 D (1:1) showed a water vapor permeability six times greater than films containing only Eudragit^® NE 30 D. The presence of quaternary ammonium functional groups from the RS 30 D polymer increased the swellability of the films. The films prepared from the blend exhibited stable permeability values when stored for 1 month at both 25°C and 40°C, while the films which were composed of only Eudragit^® NE 30 D showed a statistically significant decrease in this parameter when stored under the same conditions. Eudragit^® NE 30 D/Eudragit^® RS 30 D (1:1)-sprayed films decreased in elongation from 180% to 40% after storage at 40°C for 1 month, while those stored at 25°C showed no change in elongation. In coated pellets, the addition of Eudragit^® RS 30 D to the Eudragit^® NE 30 D increased the theophylline release rate, and the pellets were stable when stored at 25°C for a period of up to 3 months due to maintenance of the physico-mechanical properties of the film. Pellets stored at 40°C exhibited a decrease in drug release rate over time as a result of changes in film physico-mechanical properties which were attributed to further coalescence and densification of the polymer. When the storage temperature was above the T _g of the composite, instabilities in both drug release rate and physical properties were evident. Stabilization in drug release rate from coated pellets could be correlated with the physico-mechanical stability of the film formulation when stored at temperatures below the T _g of the polymer.     

A Homozygous Mutation in ADAMTSL4 Causes Autosomal-Recessive Isolated Ectopia Lentis

Ectopia lentis is a genetically heterogeneous condition that is characterized by the subluxation of the lens resulting from the disruption of the zonular fibers. Patients with ectopia lentis commonly present with a marked loss in visual acuity in addition to a number of possibly accompanying ocular complications including cataract, myopia, and retinal detachment. We here describe an isolated form of ectopia lentis in a large inbred family that shows autosomal-recessive inheritance. We map the ectopia lentis locus in this family to the pericentromeric region on chromosome 1 (1p13.2-q21.1). The linkage region contains well more than 60 genes. Mutation screening of four candidate genes revealed a homozygous nonsense mutation in exon 11 of ADAMTSL4 (p.Y595X; c.1785T→G) in all affected individuals that is absent in 380 control chromosomes. The mutation would result in a truncated protein of half the original length, if the mRNA escapes nonsense-mediated decay. We conclude that mutations in ADAMTSL4 are responsible for autosomal-recessive simple ectopia lentis and that ADAMTS-like4 plays a role in the development and/or integrity of the zonular fibers.     

Roles of ring-hydroxylating dioxygenases in styrene and benzene catabolism in Rhodococcus jostii RHA1

Proteomics and targeted gene disruption were used to investigate the catabolism of benzene, styrene, biphenyl, and ethylbenzene in Rhodococcus jostii RHA1, a well-studied soil bacterium whose potent polychlorinated biphenyl (PCB)-transforming properties are partly due to the presence of the related Bph and Etb pathways. Of 151 identified proteins, 22 Bph/Etb proteins were among the most abundant in biphenyl-, ethylbenzene-, benzene-, and styrene-grown cells. Cells grown on biphenyl, ethylbenzene, or benzene contained both Bph and Etb enzymes and at least two sets of lower Bph pathway enzymes. By contrast, styrene-grown cells contained no Etb enzymes and only one set of lower Bph pathway enzymes. Gene disruption established that biphenyl dioxygenase (BPDO) was essential for growth of RHA1 on benzene or styrene but that ethylbenzene dioxygenase (EBDO) was not required for growth on any of the tested substrates. Moreover, whole-cell assays of the ΔbphAa and etbAa1::cmrA etbAa2::aphII mutants demonstrated that while both dioxygenases preferentially transformed biphenyl, only BPDO transformed styrene. Deletion of pcaL of the β-ketoadipate pathway disrupted growth on benzene but not other substrates. Thus, styrene and benzene are degraded via meta- and ortho-cleavage, respectively. Finally, catalases were more abundant during growth on nonpolar aromatic compounds than on aromatic acids. This suggests that the relaxed specificities of BPDO and EBDO that enable RHA1 to grow on a range of compounds come at the cost of increased uncoupling during the latter's initial transformation. The stress response may augment RHA1's ability to degrade PCBs and other pollutants that induce similar uncoupling.     

Extremity cooling for heat stress mitigation in military and occupational settings

Physical work, high ambient temperature and wearing protective clothing can elevate body temperature and cardiovascular strain sufficiently to degrade performance and induce heat-related illnesses. We have recently developed an Arm Immersion Cooling System (AICS) for use in military training environments and this paper will review literature supporting such an approach and provide details regarding its construction. Extremity cooling in cool or cold water can accelerate body (core temperature) cooling from 0.2 to 1.0 °C/10 min vs. control conditions, depending on the size/surface area of the extremity immersed. Arm immersion up to the elbow results in greater heat loss than hand- or foot-only immersion and may reduce cardiovascular strain by lowering heart rate by 10–25 beats/min and increase work tolerance time by up to 60%. The findings from studies in this paper support the use of AICS prototypes, which have been incorporated as part of the heat stress mitigation procedures employed in US Army Ranger Training and may have great application for sports and occupational use.     

Demographic History of Shorea curtisii (Dipterocarpaceae) Inferred from Chloroplast DNA Sequence Variations

We assessed the variability of chloroplast DNA sequences in populations of the dipterocarp forest tree, Shorea curtisii. This species is widely distributed in hill and coastal hill dipterocarp forests of the Malay Peninsula, whereas isolated populations are found in the coastal hills of north Borneo. Two chloroplast DNA regions (1555 bp of trnH‐psbA‐trnK and 925 bp of trnL‐trnF) were sequenced from 123 individuals collected from six Malay Peninsula and two Bornean populations. There were 15 chloroplast haplotypes derived from 16 polymorphic sites. A haplotype network revealed two distinct haplogroups that correlate with two geographic regions, the Malay Peninsula and Borneo. These two haplogroups differed by a number of mutations, and no haplotypes were shared between populations from the different geographic regions. This suggests an ancient diversification of these haplogroups, and that long‐distance seed dispersal was unlikely to have occurred during the Pleistocene when the Sunda Shelf was a contiguous landmass. Phylogenetic analysis of the haplotypes together with those found in other Shorea species showed that two haplogroups in S. curtisii appear in different positions of the phylogenetic tree. This could be explained by the persistence of ancestral polymorphisms or by ancient chloroplast capture. Low levels of genetic differentiation were found between populations within each geographic region. Signature of a bottleneck followed by demographic expansion was detected in the Malay Peninsula haplogroup. The presence of two distinct evolutionary lineages in the different regions suggests that they should be managed independently to conserve the major sources of genetic diversity in S. curtisii.