“共轭聚合物-产电菌”复合生物电极构建及其在微生物燃料电池中的应用

微生物燃料电池(Microbial fuel cell,MFC)作为一种生物电化学装置,在可再生能源生产和废水处理方面的巨大潜力已引起广泛关注。然而MFC面临输出功率低、欧姆内阻高以及启动时间长等问题,极大限制了其在实际工程中的应用。MFC中阳极是微生物附着的载体,对电子的产生及传递起着关键作用,开发优质的生物电极已发展成为改善MFC性能的有效途径。共轭聚合物具有成本低、电导率高、化学稳定性及生物相容性好等优点,利用共轭聚合物修饰生物电极结构,可以实现大比表面积、缩短电荷转移路径,从而实现高效生物电化学性能。同时,纳米级共轭聚合物包覆细菌,可以使细菌产生的电子有效地传递到电极。文中综述了最近报道的共轭聚合物在MFC中的应用,重点介绍了共轭聚合物修饰的MFC阳极,系统分析了共轭聚合物的优点及局限性,以及这些高效复合生物电极如何解决MFC应用中存在的低输出功率、高欧姆内阻及长启动时间等问题。     

Testing the responses of four wheat crop models to heat stress at anthesis and grain filling

Higher temperatures caused by future climate change will bring more frequent heat stress events and pose an increasing risk to global wheat production. Crop models have been widely used to simulate future crop productivity but are rarely tested with observed heat stress experimental datasets. Four wheat models (DSSAT‐CERES‐Wheat, DSSAT‐Nwheat, APSIM‐Wheat, and WheatGrow) were evaluated with 4 years of environment‐controlled phytotron experimental datasets with two wheat cultivars under heat stress at anthesis and grain filling stages. Heat stress at anthesis reduced observed grain numbers per unit area and individual grain size, while heat stress during grain filling mainly decreased the size of the individual grains. The observed impact of heat stress on grain filling duration, total aboveground biomass, grain yield, and grain protein concentration (GPC) varied depending on cultivar and accumulated heat stress. For every unit increase of heat degree days (HDD, degree days over 30 °C), grain filling duration was reduced by 0.30–0.60%, total aboveground biomass was reduced by 0.37–0.43%, and grain yield was reduced by 1.0–1.6%, but GPC was increased by 0.50% for cv Yangmai16 and 0.80% for cv Xumai30. The tested crop simulation models could reproduce some of the observed reductions in grain filling duration, final total aboveground biomass, and grain yield, as well as the observed increase in GPC due to heat stress. Most of the crop models tended to reproduce heat stress impacts better during grain filling than at anthesis. Some of the tested models require improvements in the response to heat stress during grain filling, but all models need improvements in simulating heat stress effects on grain set during anthesis. The observed significant genetic variability in the response of wheat to heat stress needs to be considered through cultivar parameters in future simulation studies.     

丙型肝炎病毒RNA打点杂交检测方法同RT－PCR方法的比较

采用ＨＣＶ基因组结构区Ｃ区ｃＤＮＡ探针和非结构区ＮＳ３－４区ｃＤＮＡ探针,建立了用打点杂交（ｄｏｔｂｌｏｔｈｙｂｒｉｄｉｚａｔｉｏｎ）检测血清中ＨＣＶＲＮＡ的方法,同采用ＨＣＶ基因组５’端非编码区的一对寡核苷酸引物通过逆转录－聚合酶链式反应（ＲＴ－ＰＣＲ）检测血清中ＨＣＶＲＮＡ的方法相比较,发现两种方法都能快速早期和特异地检出血清中ＨＣＶＲＮＡ,但ＲＴ－ＰＣＲ法敏感性优于ＲＮＡ打点杂交法。对于无血清学指标的慢性ＮＡＮＢ肝炎病人的诊断,可采用这两种方法。这两种方法的敏感性在很大程度上依赖于引物和探针的敏感性,以及ＲＮＡ提取方法。ＲＴ－ＰＣＲ法适用于诊断病毒血症和复制,打点杂交法适用于研究ＨＣＶＲＮＡ量的变化,对治疗的评价,以及为实验筛选较高滴度的ＨＣＶＲＮＡ阳性样本。     

红松阔叶林倒木贮量动态的研究

在森林倒木研究的基础上探讨长白山红松阔叶林倒木贮量的动态,涉及红松阔叶林倒木分解及其贮量的动态规律。研究表明,倒木分解,除心腐木外,均由表及里进行;倒木分解速率在其它生态条件相同时因树种、直径和部位而异。红松阔叶林倒木贮量动态包括现有倒木贮量和倒木年输入量两个分解动态过程,现有倒木贮量在头100年其干重迅速减少,其中椴树比红松尤速,前者分解91%,后者为72%.林地倒木贮量动态与倒木年输入量分解动态相似,但前者在分解初期贮量增加较大,因为部分现有倒木未完全分解;100年后趋于一致,并恒定于16～17t·hm^-2,直至群落的顶极阶段结束.     

土壤水分和光强对景东翅子树幼苗生长及光合特性的影响

以1年生极小种群野生植物景东翅子树（Pterospermum kingtungense）实生苗为研究对象,通过双因子室内受控试验,设置6个土壤水分梯度（100％、90％、80％、60％、40％、30%田间持水量）和4个光强梯度（100%、75%、50％、25％自然光照）,研究土壤水分和光强对其幼苗生长（地上部分生物量、地下部分生物量、叶片数量和株高）及光合特性［净光合速率（P_n）、蒸腾速率（T_r）、气孔导度（G_s）、胞间二氧化碳摩尔分数（C_i）、气孔限制值（L_s）和瞬时水分利用效率（W_UE）］的影响。结果表明：①随着土壤水分的减少,景东翅子树幼苗的生长及光合指标呈现先升高后降低的趋势,一般会在田间持水能力W2（32.11%）或W3（28.54%）处理下达到峰值,W6（10.70%）条件下的生长状况最差。②随着光强的降低,除了L_s外,景东翅子树幼苗的4个生长指标及5个光合特性指标均表现出先增加后减少的趋势,且均在光强为L2（75%自然光照）或L3（50%自然光照）条件下表现最佳。③不同土壤水分和不同光强的综合评价得分显示,W2土壤水分和L2光强下的综合评价得分分别最高,证明适量的土壤水分环境和适度遮荫最适于景东翅子树幼苗的生长及其光合作用。④二元线性回归分析结果表明,土壤水分和光强这2个自变量分别对景东翅子树幼苗的生长和光合指标有较强的影响。研究结果可为景东翅子树的幼苗培育及其种群恢复与重建提供理论依据。