Structural basis for executioner caspase recognition of P5 position in substrates

Caspase-3, -6 and -7 cleave many proteins at specific sites to induce apoptosis. Their recognition of the P5 position in substrates has been investigated by kinetics, modeling and crystallography. Caspase-3 and -6 recognize P5 in pentapeptides as shown by enzyme activity data and interactions observed in the crystal structure of caspase-3/LDESD and in a model for caspase-6. In caspase-3 the P5 main-chain was anchored by interactions with Ser209 in loop-3 and the P5 Leu side-chain interacted with Phe250 and Phe252 in loop-4 consistent with 50% increased hydrolysis of LDEVD relative to DEVD. Caspase-6 formed similar interactions and showed a preference for polar P5 in QDEVD likely due to interactions with polar Lys265 and hydrophobic Phe263 in loop-4. Caspase-7 exhibited no preference for P5 residue in agreement with the absence of P5 interactions in the caspase-7/LDESD crystal structure. Initiator caspase-8, with Pro in the P5-anchoring position and no loop-4, had only 20% activity on tested pentapeptides relative to DEVD. Therefore, caspases-3 and -6 bind P5 using critical loop-3 anchoring Ser/Thr and loop-4 side-chain interactions, while caspase-7 and -8 lack P5-binding residues.     

Improved induction of antibodies against key neutralizing epitopes by human immunodeficiency virus type 1 gp120 DNA prime-protein boost vaccination compared to gp120 protein-only vaccination

A major challenge in human immunodeficiency virus type 1 (HIV-1) vaccine development is to elicit potent and broadly neutralizing antibodies that are effective against primary viral isolates. Previously, we showed that DNA prime-protein boost vaccination using HIV-1 gp120 antigens was more effective in eliciting neutralizing antibodies against primary HIV-1 isolates than was a recombinant gp120 protein-only vaccination approach. In the current study, we analyzed the difference in antibody specificities in rabbit sera elicited by these two immunization regimens using peptide enzyme-linked immunosorbent assay and a competitive virus capture assay. Our results indicate that a DNA prime-protein boost regimen is more effective than a protein-alone vaccination approach in inducing antibodies that target two key neutralizing domains: the V3 loop and the CD4 binding site. In particular, positive antibodies targeting several peptides that overlap with the known CD4 binding area were detected only in DNA-primed sera. Different profiles of antibody specificities provide insight into the mechanisms behind the elicitation of better neutralizing antibodies with the DNA prime-protein boost approach, and our results support the use of this approach to further optimize Env formulations for HIV vaccine development.     

1H, 13C, and 15N resonance assignments of a general stress protein GSP13 from Bacillus subtilis

GSP13 encoded by gene yugI is a general stress protein in Bacillus subtilis. The NMR assignments of the protein are essential for its structure determination.     

标记蛋白HPT的表达、纯化及免疫活性鉴定

构建含有HPT的原核表达质粒,经诱导表达纯化后获得HPT抗体。从含有hpt的质粒pCambia1301上扩增目的基因,经SalⅠ和NotⅠ双酶切后与原核表达载体pET-28b（+）进行粘性末端连接,成功构建了pET-28b-hpt质粒,并转化到宿主细菌大肠杆菌Rosset(DE3)中进行蛋白表达。在异丙基硫代-β-D-半乳糖苷(IPTG)诱导下,pET-28b-hpt原核表达载体在E.coli Rosset菌株中以包涵体的形式高效表达了HPT蛋白,并以纯化的目的蛋白为抗原免疫兔制备了多克隆抗体。利用本方法可以获得特异性强、灵敏度高的多克隆抗体。     

鳜碱性肌球蛋白轻链基因cDNA的克隆及其发育表达分析

肌球蛋白轻链是构成鱼类肌纤维主要组成部分,在鱼类肌肉生长和收缩过程中具有重要作用。鳜鱼具有生长快、肉质细嫩、味道鲜美、营养成分高等优良的性状。研究通过构建鳜肌肉组织cDNA文库分离到两个碱性肌球蛋白轻链基因,即MLC1和MLC3基因。序列分析显示MLC1和MLC3基因cDNA序列全长分别为1237bp和1070bp,分别编码192和150个氨基酸,除去MLC1N端多出的42个氨基酸残基,MLC1与MLC3氨基酸序列同源性为80.3%。通过PROSITEtools软件预测显示两种轻链都具有两个保守的EF-手相结构,其中第二个EF-hand结构除前三个氨基酸外同源性达100%。鱼类MLC3轻链N端没有高等脊椎动物MLC3特有标志序列。采用实时荧光定量PCR方法对鳜鱼MLC1和MLC3发育性表达分析表明,在原肠期开始有低量表达,与原肠期、尾芽期和肌肉效应期相比,心搏期和仔鱼期MLC1和MLC3表达量显著升高。研究结果首次提供了鳜肌肉组织肌球蛋白主要结构基因的分子生物学信息以及它们在鳜肌肉组织发生和功能的相关性。       

Theoretical and electrophysiological evidence for axial loading about aortic baroreceptor nerve terminals in rats

Arterial baroreceptors are essential for neurocirculatory control, providing rapid hemodynamic feedback to the central nervous system. The pressure-dependent discharge of carotid and aortic baroreceptor afferents has been extensively studied. A common assumption has been that circumferential deformation of the arterial wall is the predominant mechanical force affecting baroreceptor discharge. However, in vivo the arterial tree is under significant longitudinal tension, leading to the hypothesis that axially directed forces may contribute to baroreceptor function. To test this hypothesis, we utilized a combination of finite element modeling methods and an in vitro rat aortic arch preparation. Model formulation utilized traditional analytic constructs available in the literature followed by refinement of model material parameters through direct comparison of computationally and experimentally generated pressure-diameter curves. The numerical simulations strongly indicated a functional role for axial loading within the region of the baroreceptive nerve terminal. This prediction was confirmed through single-fiber recording of baroreceptor nerve discharge under conditions with and without longitudinal tension in the vessel preparation. The recordings (n = 5) demonstrated that longitudinal tension significantly (P < 0.02) lowered both the pressure threshold (P(th), mmHg) for baroreceptor discharge and sensitivity (S(th), Hz/mmHg). The effect was nearly instantaneous and sustained; i.e., under longitudinal tension average P(th) was 84 +/- 3 mmHg and S(th) was 0.71 +/- 0.15 Hz/mmHg, which immediately increased to a P(th) of 94 +/- 4 mmHg and a S(th) of 1.20 +/- 0.32 Hz/mmHg with loss of axial tension. Possible explanations of how an abrupt change in axial loading could result in a synchronized increase in afferent drive of the baroreceptor reflex, and the potentiating effect this could have on neurogenically mediated orthostatic intolerance are discussed.     

Belowground net primary productivity and biomass allocation of a grassland in Inner Mongolia is affected by grazing intensity

The root system of permanent grasslands is of outstanding importance for resource acquisition. Particularly under semi-arid conditions, the acquisition of water and nutrients is highly variable during the vegetation growth period and between years. Additionally, grazing is repeatedly disturbing the functional equilibrium between the root system and the transpiring leaf canopy. However, very few data is available considering grazing effects on belowground net primary productivity (BNPP) and root-shoot dry mass allocation in natural grassland systems. We hypothesise that grazing significantly reduces BNPP due to carbon reallocation to shoot growth. Root biomass and BNPP were estimated by soil coring in 2004, 2005 and 2006 and from ingrowth cores in 2005 and 2006 at one site which has been protected from grazing since 1979 (UG79), at one winter grazing (WG), and one heavily grazed (HG) site. BNPP was estimated from the summation of significant increments of total and live root biomass and from accumulated root biomass of ingrowth cores. Belowground biomass varied from 1,490–2,670 g m^?2 and was significantly lower under heavy grazing than at site UG79. Root turnover varied from 0.23 to 0.33 year^?1 and was not significantly different between sites. Heavy grazing significantly decreased live root biomass and BNPP compared to site UG79. Taking BNPP estimates from live root biomass dynamics and ingrowth cores as the most reliable values, the portion of dry mass allocated belowground relative to total net primary productivity (BNPP/NPP) varied between 0.50–0.66 and was reduced under heavy grazing in 2005, but not in 2006. The positive correlation between cumulative root length density of ingrowth cores and leaf dry matter suggests that the ingrowth core method is suitable for studying BNPP in this semi-arid steppe system. Grazing effects on BNPP and BNPP/NPP should be considered in regional carbon models and estimates of belowground nutrient cycling.     

I-STOD: a new standardization method for analysing indirect-ELISA results of a schistosomiasis field study

Variability among samples analysed using the same ELISA protocol generates ambiguity in deciding which assay best quantifies the protein concentration. In this study, we propose a standardization method, called I-STOD (Improved STandardization method for Optical Density), for the transformation of OD values on different plates into relative concentrations of the antibody levels being assessed. We derived an equation relating OD values of different test samples to antibody levels according to the multi-stage reaction dynamics of the indirect-ELISA. Using serum samples from a Schistosomiasis japonica endemic area, we evaluated the fitness of the I-STOD model to experimental data of a standard reference serum in comparison with 5 other models. Calibration curves fitted by the I-STOD method judged to be superior, based on adjusted R2 (adjusted R2>0.99 on 22 out of 26 plates) values. The CV (coefficient of variation) value of the results between multi-well plates and the number of plates with OD values beyond the control range in Shewhart charts also demonstrate that the I-STOD method is a powerful tool which can greatly improve the comparability of results on different multi-well ELISA plates. We conclude that a standardization method is certainly necessary for antibody levels detected in order to properly illustrate clinical differences.