<Emphasis Type="Italic">Teucrium polium</Emphasis> Complex with Molybdate Enhance Cultured Islets Secretory Function

Islet transplantation has become a promising treatment in the therapy of type 1 diabetes. Its function improvement, after isolation and before transplantation, is crucial because of their loss both in number and function of islets after isolation procedures. Trace elements sodium orthovanadate (SOV) and sodium molybdate (SM), as well as medicinal plant Teucrium polium L. (TP), showed and possessed high beneficial antioxidative potential and even hypoglycemic properties via their effect on islets. We evaluated the effect of these components in combination on cultured islet function in order to improve pancreatic islet transplantation. Rat pancreatic islets were cultured for 24 h then incubated with different concentrations of TP (0.01 and 0.1 mg/mL) alone and in combination with SOV (1 mM) or SM (1 mM). Insulin concentration in buffer media was measured as islet secretory function. Administration of TP (0.01 mg/mL), SM, and SOV alone or in combination with each other significantly increased insulin secretion at high glucose concentration (16.7 mM); insulin secretion was significantly greater in the group containing both TP and SM than other treated groups (p < 0.05). The combination of the mentioned trace elements especially molybdate with TP could improve islet cells function before transplantation.     

Ultra-compact Spatial Terahertz Switch Based on Graphene Plasmonic-Coupled Waveguide

We are proposing graphene (G)-based multilayered plasmonic spatial switch, operating at 10 THz. It is composed of hBN/Ag/hBN/G/hBN/G/hBN/SiO₂/p⁺-Si multilayers. When a 10-THz transverse magnetic (TM)-polarized signal is normally incident upon the structure top surface, the nanoaperture devised in the Ag nanolayer, acting as a grating, excites surface plasmons at the top graphene micro-ribbons/hBN interface. These surface plasmons depending on the graphenes chemical potentials can be coupled to the lower-right or left graphene micro-ribbons and continue to propagate laterally towards the corresponding output port. Numerical simulations show that a change of ∆V_G ≈ ± 2.7 V in the voltage, applied to the gated micro-ribbons, can modulate their chemical potentials sufficiently to switch the right (left) output port from ON (OFF) to OFF(ON) and vice versa. Besides its low power consumption, the switch ultra-small dimensions make it a potential spatial router suitable for THz-integrated circuit applications.

     

Effect of Foliar Application of Silicon and Salicylic Acid on Regulation of Yield and Nutritional Responses of Greenhouse Cucumber Under High Temperature

Plant nutrition management is known as an efficient strategy to control environmental constraints. This experiment was conducted in a climate control greenhouse with a hydroponic system. The high temperature (36 °C?±?1) was imposed on the pots after fruit formation. The studied factors were silicon in 2 concentrations (0 and 4 parts per thousand (ppt)) and salicylic acid in 3 concentrations (0, 0.5, and 1 mM). They were sprayed on cucumber plants 3 times and under high-temperature conditions to evaluate if they can regulate and improve the yield and quality of cucumber fruit under high-temperature conditions or not. The results showed that all treatments significantly improved the nutritional status, total yield, and fruit quality (including marketable yield (i.e., fruits that can be sold due to their good shape) and nitrate content). Under high-temperature conditions, foliar application of silicon had the highest effect on the increase of total yield and marketable fruit yield (respectively, 36.14% and 40.29% increase compared to the control treatment). Micro-nutrients concentrations in the leaf were significantly increased by Si but a reverse status happened for salicylic acid. Under high temperatures, both treatments also significantly decreased the nitrate content of the fresh matter of fruit but silicon was the superior treatment. Silicon and salicylic acid, respectively, had positive effects on mitigation of adverse effects of high temperature on cucumber plants. These findings suggest the use of these treatments under high-temperature conditions in greenhouse cucumber production.

Graphical Abstract

N–No₃ content in dry matter of leaf (left) and fresh matter of fruit (right) affected by different treatments. *SaA0–SiA4: 4 ppt Si; SaA0.5–SiA0: 0.5 mM SA; SaA0.5–SiA4: 0.5 mM SA?+?4 ppt Si; SaA1–SiA0: 1 mM SA; SaA1–SiA4: 1 mM SA?+?4 ppt Si; control: without any SA and Si applications. Means in the same column followed by the same letter are not significantly different according to DMRT at (P?≤?0.05)

     

Dehydroquinate synthase: the role of divalent metal cations and of nicotinamide adenine dinucleotide in catalysis

The cofactor requirements of dehydroquinate synthase from Escherichia coli have been characterized. The homogeneous enzyme, purified from the overproducing strain RB791 (pJB14), is a monomeric metalloenzyme of Mr = 39,000 that contains 1 mol of tightly bound Co(II) according to atomic absorption analysis. The holoenzyme rapidly loses activity upon incubation with EDTA, giving rise to a stable but catalytically inactive apoenzyme. Activity is fully restored by reconstitution with Co(II) and partially restored with other divalent cations. Reconstitution of the apoenzyme with Zn(II) (which is probably the functioning metal in vivo) restores activity to 53% of the level observed with the Co(II)-holoenzyme. The presence of the substrate 3-deoxy-D-arabino-heptulosonate 7-phosphate (1) blocks the inactivation by EDTA. Dehydroquinate synthase also binds 1 mol of NAD+, the presence of which is essential for catalytic activity. The rate constant for the dissociation of NAD+ from the Co(II)-holoenzyme was found to be 0.024 min-1. Under turnover conditions with saturating levels of substrate, the dissociation rate of NAD+ increases by a factor of 40, to 1 min-1. Under these conditions (pH 7.5, 20 degrees C), the Km for NAD+ was determined to be 80 nM.     

Molecular cloning of covalently closed circular DNA of bovine leukemia virus

The two species of covalently closed circular DNA molecules of bovine leukemia virus were cloned in the lambda phage vector lambda gtWES X lambda B. Of the nine independent recombinant lambda-bovine leukemia virus clones that were analyzed, three were derived from the small and six were derived from the large circular molecules carrying, respectively, one and two copies of the long terminal repeat sequences. Comprehensive restriction endonuclease mapping of the unintegrated bovine leukemia virus and the cloned DNA molecules showed that eight of the nine clones carried viral information without any detectable deletions or insertions of more than ca. 50 base pairs. One of the nine clones, which carries a retroviral insert with one copy of the long terminal repeat, had a deletion of ca. 150 base pairs.     

The mechanism of inhibition of S-adenosyl-L-homocysteine hydrolase by fluorine-containing adenosine analogs

(Z)-4',5'-Didehydro-5'-deoxy-5'-fluoroadenosine (I), 5'-deoxy-5'-difluoroadenosine (II), and 4',5'-didehydro-5'-deoxy-5'-fluoroarabinosyl-adenosine (III) are inhibitors of rat liver S-adenosyl-L-homocysteine hydrolase. Compounds I and II are time-dependent and irreversible inhibitors of the enzyme. Both I and II are oxidized by E.NAD to produce E.NADH, and fluoride anion is formed in the inactivation reaction (0.7 to 1.0 mole fluoride/mole of enzyme subunit, and 1.7 moles fluoride/mole of enzyme subunit from I and II, respectively). The enzyme is stoichiometrically labeled with [8-3H]-I, but the label is lost upon denaturation of the protein either with or without treatment of the labeled complex with sodium borohydride. The compound III, the arabino derivative of I, is a competitive inhibitor of the enzyme. The mechanism of the inhibition of S-adenosyl-L-homocysteine hydrolase by these inhibitors is discussed.     

Inventory issues in incremental FMS implementation

In recent years, numerous studies have demonstrated convincingly that impressive benefits can be obtained by the adoption of flexible manufacturing systems (FMSs). To obtain the benefits of an FMS requires the development of a completely integrated system. However, FMS implementations are frequently done incrementally through the introduction of subsystems such as flexible machining centers into an existing conventional system. The purpose of this research is to investigate some of the operational issues associated with the introduction of a CNC (computer numerically controlled) machine tool into a conventional system. The primary objective of the present study is to explore the relative effects on inventory holding cost of installing a single CNC at different locations within three different system configurations. Additionally, the study examines the sensitivity of these impacts to changes in (1) System utilization; (2) the ratios of setup times to run times in the conventional work centers; and (3) the rates of increase in holding costs for parts as they move through the system. Results indicated that, in general, introduction of a CNC into an otherwise conventional system reduces inventory holding cost for the system as a whole. However, the degree of this reduction varies depending on the position of the CNC in the system. In some cases the reduction in inventory holding cost is substantial, while in other cases it is relatively small.     

Study of quercetin and fisetin synergistic effect on breast cancer and potentially involved signaling pathways

Naturally-derived drugs have drawn much attention in recent decades. Efficiency, lower toxicity, and economic reasons are some of their advantages that justify this broad range of administration for different diseases, including cancer. If we can find a specific combination that boosts the effects of their single therapy, leading to synergism effect, increased efficiency, and decreased toxicity, they can act even better. Quercetin and fisetin, two well-known flavonoids, have been used to fight against various cancers. In this study, we investigated their possible synergism quercetin and fisetin on MCF7, MDA-MB-231, BT549, T47D, and 4T1 breast cancer cell lines. Then the optimum combined dose was used to study their impacts on wound healing abilities and clonogenic properties. The real-time qPCR was used to study the expression of their validated downstream effectors in predicted pathways. A significant synergism effect (p < .01, combination index: <1) was observed for all cell lines. Combination therapy was significantly more effective in colony formation (p < .0001) and wound healing assays (p < .001) compared to single therapies. The expression level of potential effectors was also showed a greater change. In vivo study confirmed the in vitro results and showed how significantly (p < .001) their synergism promotes their singular function in inhibiting cancer progression. The breast cancer mouse models receiving combined therapy lived longer with higher average body weight and smaller tumor sizes. These results exhibit that quercetin and fisetin inhibit cancer cell proliferation, migration and colony formation synergistically, and matrix metalloproteinase signaling and apoptotic pathways are relatively responsible for inhibitory activities.