Factors Influencing the Survival of Sympatric Gorilla (<Emphasis Type="Italic">Gorilla gorilla gorilla</Emphasis>) and Chimpanzee (<Emphasis Type="Italic">Pan troglodytes troglodytes</Emphasis>) Nests

Accurate and precise surveys of primate abundance provide the basis for understanding species ecology and essential information for conservation assessments. Owing to the elusive nature of wild apes and the vast region of dense forest they inhabit, population estimates of central chimpanzees (Pan troglodytes troglodytes) and western lowland gorillas (Gorilla gorilla gorilla) have largely relied on surveys of their nests. Specific information about the nesting behavior of apes permits the estimation of the number of nests built (nest creation rate). Similarly, information on nest characteristics and environmental factors can be used to estimate the time it takes nests to decay (nest decay rate). Nest creation and decay rates are then used to convert nest density estimates to absolute ape densities. Population estimates that use site-specific estimates of nest creation and decay rates are more accurate and precise. However, it is common practice to generalize these conversion factors across sites because of the additional cost of studies required to gather the information to estimate them. Over a 9-mo study period, we detected and monitored the time to decay of gorilla nests (N = 514) and chimpanzee nests (N = 521) in northern Republic of Congo. We investigated the influence of nest characteristics and environmental factors on nest survivorship and estimated the mean time to nest decay (or equivalently survival) using MARK. Key factors influencing nest decay rate included ape species, forest type, nest height, mean rainfall, nest structure, nest type, and primary aspects of nest construction. Our findings highlight the synergistic effect of behavior and environment on great ape nest degradation, as well as providing practical insights for improving measures to monitor remaining populations of these endangered species.     

4 in 1: Antibody‐free protocol for isolating the main hepatic cells from healthy and cirrhotic single rat livers

Liver cells isolated from pre‐clinical models are essential tools for studying liver (patho)physiology, and also for screening new therapeutic options. We aimed at developing a new antibody‐free isolation method able to obtain the four main hepatic cell types (hepatocytes, liver sinusoidal endothelial cells [LSEC], hepatic macrophages [HMΦ] and hepatic stellate cells [HSC]) from a single rat liver. Control and cirrhotic (CCl₄ and TAA) rat livers (n = 6) were perfused, digested with collagenase and mechanically disaggregated obtaining a multicellular suspension. Hepatocytes were purified by low revolution centrifugations while non‐parenchymal cells were subjected to differential centrifugation. Two different fractions were obtained: HSC and mixed LSEC + HMΦ. Further LSEC and HMΦ enrichment was achieved by selective adherence time to collagen‐coated substrates. Isolated cells showed high viability (80%‐95%) and purity (>95%) and were characterized as functional: hepatocytes synthetized albumin and urea, LSEC maintained endocytic capacity and in vivo fenestrae distribution, HMΦ increased expression of inflammatory markers in response to LPS and HSC were activated upon in vitro culture. The 4 in 1 protocol allows the simultaneous isolation of highly pure and functional hepatic cell sub‐populations from control or cirrhotic single livers without antibody selection.     

Both human and soya bean ferritins highly improve the accumulation of bioavailable iron and contribute to extend the chronological life in budding yeast

Ferritin proteins have an enormous capacity to store iron in cells. In search for the best conditions to accumulate and store bioavailable iron, we made use of a double mutant null for the monothiol glutaredoxins GRX3 and GRX4. The strain grx3grx4 accumulates high iron concentrations in the cytoplasm, making the metal easily available for ferritin chelation. Here, we perform a comparative study between human (L and H) and soya bean ferritins (H1 and H2) function in the eukaryotic system Saccharomyces cerevisiae. We demonstrate that the four human and soya bean ferritin chains are successfully expressed in our model system. Upon coexpression of either both human or soya bean ferritin chains, respiratory conditions along with iron supplementation led us to obtain the maximum yields of iron stored in yeast described to date. Human and soya bean ferritin chains are functional and present equivalent properties as promoters of cell survival in iron overload conditions. The best system revealed that the four human and soya bean ferritins possess a novel function as anti-ageing proteins in conditions of iron excess. In this respect, both ferritin chains with oxidoreductase capacity (human-H and soya bean-H2) bear the highest capacity to extend life suggesting the possibility of an evolutionary conservation.     

Extensive unfolding of the C-LytA choline-binding module by submicellar concentrations of sodium dodecyl sulphate

We have investigated the stability of the choline-binding module C-LytA against sodium dodecyl sulphate (SDS)-induced unfolding at pH 7.0 and 20 degrees C. A major intermediate with an unfolded N-terminal region accumulates at around 0.75 mM SDS, whereas 2.0 mM SDS was sufficient for a complete unfolding. This might be the first report of a protein being extensively unfolded by submicellar concentrations of SDS, occurring through formation of detergent clusters on the protein surface. All transitions were reversible upon SDS complexation with beta-cyclodextrin, allowing the calculation of thermodynamic parameters. A model for the unfolding of C-LytA by SDS is presented and compared to a previous denaturation scheme by guanidine hydrochloride.     

Simultaneous analysis of lysine, Nepsilon-carboxymethyllysine and lysinoalanine from proteins

Protein quality was assayed by simultaneous measurement of lysine (Lys), carboxymethyllysine (CML) and lysinoalanine (LAL). GC-FID analysis of N-tert-butyl dimethylsilyl (tBDMSi) derivatives of these amino acids was undertaken. tBDMSi derivates were separated on a CP-SIL 5CB commercially fused silica capillary column (25 m x 0.25 mm i.d., 0.25 microm film thickness) employing a thermal gradient programmed from 200 to 300 degrees C. The identity of tBDMSi derivatives of Lys, CML and LAL was established by GC-MS while FID detection was employed for quantification. Analytical parameters such as linearity (lysine 350-4200 microM, LAL 3-81 microM, CML 16-172 microM), precision (1-13% variation coefficients), accuracy (85-108% average recovery) and limits of detection (lysine 0.4 mg/100 g protein, LAL 5.0 mg/100 g protein, CML 3.4 mg/100 g protein) and quantification (lysine 1.4 mg/100g protein, LAL 15.2 mg/100 g protein, CML 11.2 mg/100 g protein) were determined for validation of the analytical approach. Model systems and real foods have been studied. Kinetic of CML formation from different food proteins (BSA, soy protein, casein and gluten) was performed employing model systems. Carboxymethylation rate depended on the source of protein. Maillard reaction progressed to advanced stages damaging the protein quality of stored infant foods, soy drinks, boiled eggs and dry powdered crepes. CML values ranged from 62 to 440 mg/100 g protein were measured. LAL was also formed during boiling eggs (21-68 mg/100g protein) indicating additional damage by crosslinking reaction. In agreement, lysine content was affected by both food processing and storage.     

Parameterization of the stomatal component of the DO3SE model for Mediterranean evergreen broadleaf species

An ozone (O3) deposition model (DO3SE) is currently used in Europe to define the areas where O3 concentrations lead to absorbed O3 doses that exceed the flux-based critical levels above which phytotoxic effects would be likely recorded. This mapping exercise relies mostly on the accurate estimation of O3 flux through plant stomata. However, the present parameterization of the modulation of stomatal conductance (g(s)) behavior by different environmental variables needs further adjustment if O3 phytotoxicity is to be assessed accurately at regional or continental scales. A new parameterization of the model is proposed for Holm oak (Quercus ilex), a tree species that has been selected as a surrogate for all Mediterranean evergreen broadleaf species. This parameterization was based on a literature review, and was calibrated and validated using experimentally measured data of g(s) and several atmospheric and soil parameters recorded at three sites of the Iberian Peninsula experiencing long summer drought, and very cold and dry winter air (El Pardo and Miraflores) or milder conditions (Tietar). A fairly good agreement was found between modeled and measured data (R2 = 0.64) at Tietar. However, a reasonable performance (R2 = 0.47-0.62) of the model was only achieved at the most continental sites when g(s) and soil moisture deficit relationships were considered. The influence of root depth on g(s) estimation is discussed and recommendations are made to build up separate parameterizations for continental and marine-influenced Holm oak sites in the future.     

Ozone in Spain's national parks and protected forests

In general, it is difficult to measure air pollutant concentrations in remote areas, as they are mostly national parks and protected areas. Passive samplers provide an accurate and inexpensive method for measuring cumulative exposures of different air pollutants. They have been used to collect ozone data in both laboratory and field at different geographical scales. The objective of the present study is to fill the knowledge gap regarding air quality in remote areas of Spain, such as national parks and protected areas. Because there were no systematic data sets on the main air pollutants that could affect these areas, an air quality measurement network was established between 2001 and 2004 on 19 locations inside Spanish national parks and protected areas. The data collected suggest that ozone levels in mountainous areas are high enough to affect sensitive vegetation. Most of the locations registered moderate-to-high ozone levels, with important interannual variability. Altitudinal ozone gradients were observed in most of the parks with complex topography due to the establishment of local circulations that incorporate polluted air masses from polluted airsheds or even long-range transport (i.e., Canary Islands). Different latitude-dependent, yearly cycles were also observed, showing two, one, or no clear peaks depending on the region. These findings extend to the most southerly locations, except in the Canary Islands, where pollution transported from other regions in the upper transport layers probably led to the high concentrations observed.     

Factors modelling population structure in brown trout Salmo trutta L.: genetic monitoring of populations in Esva River (northwestern Spain)

Hydrobiologia - In brown trout (Salmo trutta L.), spatial patterns of population structure have been extensively studied. However, less attention has been paid to the short-term temporal stability...