Isolation and Characterisation of Insulin-Releasing Compounds from <Emphasis Type="Italic">Pseudechis australis</Emphasis> and <Emphasis Type="Italic">Pseudechis butleri</Emphasis> Venom

Crude venom from two elapid snakes Pseudechis australis and Pseudechis butleri was fractionated by gel filtration chromatography and selected fractions screened for in vitro insulin-releasing activity using clonal pancreatic BRIN-BD11 cells. Following acute 20-min incubation at 5.6 mM glucose, 9 fractions exhibited significant (P < 0.001) insulin-releasing activity. Structural characterisation of active fractions was achieved primarily using MALDI–TOF MS and N-terminal Edman degradation sequencing. The partial N-terminal sequences are reported for a total of 7 venom components. Their homology to existing sequences as determined using BLAST searching uncovered the main insulin-releasing families as being phospholipases A₂ and short α-neurotoxins. A number of sequences are reported for the first time from P. butleri venom which is much less studied than the related P. australis.     

Efficiency of genomic selection for tomato fruit quality

Fruit quality is polygenic; each component has variable heritability and is difficult to assess. Genomic selection, which allows the prediction of phenotypes based on the whole-genome genotype, could vastly help to improve fruit quality. The goal of this study is to evaluate the accuracy of genomic selection for several metabolomic and quality traits by cross-validation and to estimate the impact of different factors on its accuracy. We analyzed data from 45 phenotypic traits and genotypic data obtained from a previous study of genetic association on a collection of 163 tomato accessions. We tested the influence of (1) the size of training population, (2) the number and density of molecular markers and (3) individual relatedness on the accuracy of prediction. The prediction accuracy of phenotypic values was largely related to the heritability of the traits. The size of training population increased the accuracy of predictions. Using 122 accessions and 5995 single nucleotide polymorphisms (SNPs) was the optimal condition. The density of markers and their numbers also affected the accuracy of the prediction. Using 2313 SNP markers distributed 0.1 cM or more apart from each other reduced the accuracy of prediction, and no gain in prediction accuracy was found when more markers were used in the model. Additionally, the more accessions were related, the more accurate were the predictions. Finally, the structure of the population negatively affected the prediction accuracy. In conclusion, the results obtained by cross-validation illustrated the effect of several parameters on the accuracy of prediction and revealed the potential of genomic selection in tomato breeding programs.     

Modification and evaluation of the Carba NP test by use of paper strip for simple and rapid detection of carbapenemase-producing <Emphasis Type="Italic">Enterobacteriaceae</Emphasis>

Carbapenemase-producing Enterobacteriaceae (CPE) isolates have now emerged worldwide. We therefore modified the phenotypic Carba NP test by use of a filter paper strip for easily and rapidly identifying CPE in routine laboratory. A collection of 56 CPE and carbapenemase-producing Pseudomonas spp. isolates (including 28 NDM-1, 11 IMP-14a, 1 IMP-1, 1 IMP-4, 1 IMP-9, 1 IMP-15, 4 VIM-2, 1 VIM-1, 1 IMP-14a with VIM-2, 3 OXA-48, 3 OXA-181 and 1 KPC-2 producers) and 41 non-CPE isolates (including 19 ESBL, 7 pAmpC, 3 AmpC, 9 ESBL with pAmpC and 3 non-ESBL & non-AmpC producers) as confirmed by the PCR methods were tested by the paper strip method using pharmaceutical imipenem/cilastatin as a substrate. Bacterial colonies of each isolate were applied directly on filter paper strips dropped with either imipenem-phenol red (test strip) or phenol red solution alone (control strip). The reaction was read within 5 min. This test failed to detect 3 OXA-181, 2 OXA-48 and 3 IMP-14a producers (85.7 % sensitivity), whereas no false positives were seen (100 % specificity). Further evaluation of the paper strip test in 267 CPE screening-positive isolates from three hospitals by their medical technologists showed 92.0 % sensitivity (100 % for NDM producers) and 100 % specificity compared with the PCR methods. Because of its ease, rapidness and cost effective, the paper strip test has a potential for routine CPE testing in low-resource laboratories particularly in areas with high prevalence of NDM enzymes, leading to appropriate antimicrobial therapy and infection control strategy.     

Gene expression profiles in different stem internodes reveal the genetic regulation of primary and secondary stem development in <Emphasis Type="Italic">Betula platyphylla</Emphasis>

Secondary growth of stems is an important process for the radial increase of trees. To gain an insight into the molecular mechanisms underlying stem development from primary to secondary growth and to provide information for molecular research and breeding in Betula platyphylla (birch), the gene expression profiles of material from the first, third, and fifth internodes (IN) of 3-month-old seedlings were analyzed. Compared with the first IN, 177 genes were up-regulated and 157 genes down-regulated in the third IN; in the fifth IN, 180 genes were up-regulated and 275 genes were down-regulated. The expressions of 24 genes were up-regulated and 6 genes were down-regulated in the fifth IN relative to the third IN. The differentially expressed genes were annotated as having roles in cambium, xylem, and phloem development and formation; including cell wall expansion, cellulose biosynthesis, lignin biosynthesis and deposition, xylem extension, cell wall modification, and growth hormone responses. The expressions of genes related to cell wall expansion and cellulose biosynthesis in the primary cell wall were down-regulated in the third and fifth IN relative to the first IN. Genes involved in lignin biosynthesis, xylem extension, and cellulose synthesis in the secondary cell wall were up-regulated in the third and fifth IN relative to the first IN. These results described the patterns of gene expression during stem development in birch and provided candidate genes for further functional characterization.     

Seasonal change in xylem growth of <Emphasis Type="Italic">Pinus densiflora</Emphasis> in central Japan

This study investigated the seasonal change in xylem growth of Japanese red pine (Pinus densiflora). Wood cores were sampled at 2-week intervals from April to November in 2012 using the microcoring method. Daily increment rates of tracheid number and tree-ring width were compared with seasonal changes in daily mean temperature and photoperiod. Xylem growth started in early to late May and stopped in late October to early November. The maximum daily increment rates of tracheid number and tree-ring width were in early July. The 95 % confidence intervals of the timing of the maximum daily increment rates included the summer solstice (23 June) with the longest photoperiod, but not the warmest day (30 July). The maximum daily increment rate of xylem growth is thought to be controlled by the photoperiod rather than by temperature. The daily mean temperature exceeded 20 °C after the summer solstice, indicating that temperature is not a limiting factor for xylem growth. This study suggests that the timing of maximum daily increment rates of xylem growth of P. densiflora is controlled by the photoperiod.     

Large-Area,Low-Cost Infrared Metamaterial Fabrication Via Pulsed Laser Deposition with Metallic Mesh as a Shadow Mask

Metamaterials are artificial periodic structures with negative permittivity and permeability. Several interesting properties can be obtained in metamaterials, such as negative index behavior, which can be used for building perfect lenses, cloaking, antennas, etc. As the metamaterial’s properties are determined by its structure, the key challenge is to reduce the fabrication cost of the periodic structure on the micrometer or nanometer scale for realistic applications. In this paper, we experimentally demonstrate a new one-step method for the fabrication of a large-area infrared metamaterial at extremely low cost. A metallic mesh is used as a shadow mask during the pulsed laser deposition (PLD) process to fabricate a FeNi/SiC/FeNi multilayer sandwich structure on Si substrate (cm² level). The sample shows a strong absorption peak in the infrared frequency range, and the absorption intensity changes with the sample’s geometry.     

Effect of Water Content on the Glass Transition Temperature of Calcium Maltobionate and its Application to the Characterization of Non-Arrhenius Viscosity Behavior

To understand the fundamental physical properties of calcium maltobionate (MBCa), its water sorption isotherm, glass transition temperature (T _g), and viscosity (η) were investigated and compared with those of maltobionic acid (MBH) and maltose. Although amorphous maltose crystalized at water activity (a _w) higher than 0.43, MBCa and MBH maintained an amorphous state over the whole a _w range. In addition, MBCa had a higher T _g and greater resistance to water plasticizing than MBH and maltose. These properties of MBCa likely originate from the strong interaction between MBCa and water induced by electrostatic interactions. Moreover, the effects of temperature and water content on η of an aqueous MBCa solution were evaluated, and its behavior was described using a semi-empirical approach based on a combination of T _g extrapolated by the Gordon-Taylor equation and a non-Arrhenius formula known as the Vogel–Fulcher–Tammann equation. This result will be useful for understating the effect of MBCa addition on the solution’s properties.     

Four putative entomopathogenic fungi of armoured scale insects on <Emphasis Type="Italic">Citrus</Emphasis> in Australia

This study led to the discovery of four putative entomopathogenic fungi of armoured scale insects on citrus trees in coastal New South Wales. Two of these species belong in Podonectria as P. coccicola (Ellis & Everh.) Petch (syn. Tetracrium coccicola (Höhn.) Ellis & Everh.) and P. novae-zelandiae Dingley. Members of this genus are grown in culture for the first time. Formerly placed in the Pleosporales, Tubeufiaceae, or more recently in the Tubeufiales, these species are herein placed in the new family Podonectriaceae fam. nov., Pleosporales. Another species is placed in the Hypocreales, Bionectriaceae as Clonostachys coccicola (J.A. Stev.) H.T. Dao comb. nov. (basionym Tubercularia coccicola J.A. Stev., syn. Nectria tuberculariae Petch). The fourth species is Myriangium citri Henn. (Myriangiales, Myriangiaceae). Each fungal species is characterized and the phylogenetic placement confirmed by molecular analyses of the ITS and 28 s rDNA regions. In addition, their biology is noted, including location of the fungi within tree canopies.