Synthesis and identification of novel oxa-steroids as progesterone receptor antagonists

A novel series of oxa-steroids 6 derived from (8S, 13S, 14R)-7-oxa-estra-4,9-diene-3,17-dione 1 have been synthesized and identified as potent and selective progesterone receptor antagonists. These novel oxa-steroids showed similar potency to mifepristone. Preliminary SAR study resulted in the most potent 17-phenylethynyl oxa-steroid 6i wih an IC(50) of 1.4nM. In contrast to the equipotent mifepristone toward the progesterone receptor (PR) and glucocorticoid receptor (GR), compound 6i had over 200-fold selectivity for PR over GR.     

Plant cytokinesis requires de novo secretory trafficking but not endocytosis

During plant cytokinesis membrane vesicles are efficiently delivered to the cell-division plane, where they fuse with one another to form a laterally expanding cell plate. These membrane vesicles were generally believed to originate from Golgi stacks. Recently, however, it was proposed that endocytosis contributes substantially to cell-plate formation. To determine the relative contributions of secretory and endocytic traffic to cytokinesis, we specifically inhibited either or both trafficking pathways in Arabidopsis. Blocking traffic to the division plane after the two pathways had converged at the trans-Golgi network disrupted cytokinesis and resulted in binucleate cells, whereas impairment of endocytosis alone did not interfere with cytokinesis. By contrast, inhibiting ER-Golgi traffic by eliminating the relevant BFA-resistant ARF-GEF caused retention of newly synthesized proteins, such as the cytokinesis-specific syntaxin KNOLLE in the ER, and prevented the formation of the partitioning membrane. Our results suggest that during plant cytokinesis, unlike animal cytokinesis, protein secretion is absolutely essential, whereas endocytosis is not.     

β<Subscript>2</Subscript>-Integrin-Mediated Adhesion and Intracellular Ca<Superscript>2+</Superscript> Release in Human Eosinophils

Human eosinophils spontaneously adhere to various substrates in the absence of exogenously added activators. In the present study a method was developed for characterizing eosinophil adhesion by measuring changes in impedance. Impedance measurements were performed in HCO₃-buffered HybriCare medium maintained in a humidified 5% CO₂ incubator at 37°C. Impedance increased by more than 1 kΩ within minutes after eosinophils made contact with the substrate, reaching a peak within 20 min. Blocking mobilization of intracellular [Ca²⁺] that precedes adhesion with BAPTA-AM (10 μM) completely inhibited the rise in impedance as well as the changes in cell shape typically observed in adherent cells. However, lowering the extracellular [Ca²⁺] with 2.5 mM EGTA did not inhibit the increase in impedance. Pretreatment with anti-CD18 antibody to block substrate interactions with β₂-integrins, or jasplakinolide (2 μM) to block actin reorganization, abolished the increase in impedance and adherent morphology of the cells. Exposure of eosinophils to the phosphatidylinositol 3 kinase inhibitor LY294002 (5 μM) or treatment with protein kinase C zeta pseudosubstrate to competitively inhibit activity of the enzyme significantly reduced the increase in impedance and inhibited the cell spreading associated with adhesion. These results demonstrate a novel method for measuring eosinophil adhesion and showed that, following formation of a tethered attachment, a rapid increase in intracellular [Ca²⁺] precedes the cytoskeletal rearrangements required for cell shape changes and plasma membrane-substrate interactions associated with adhesion.     

Post-Fire Resource Redistribution in Desert Grasslands: A Possible Negative Feedback on Land Degradation

Desert grasslands, which are very sensitive to external drivers like climate change, are areas affected by rapid land degradation processes. In many regions of the world the common form of land degradation involves the rapid encroachment of woody plants into desert grasslands. This process, thought to be irreversible and sustained by biophysical feedbacks of global desertification, results in the heterogeneous distribution of vegetation and soil resources. Most of these shrub-grass transition systems at the desert margins are prone to disturbances such as fires, which affect the interactions between ecological, hydrological, and land surface processes. Here we investigate the effect of prescribed fires on the landscape heterogeneity associated with shrub encroachment. Replicated field manipulation experiments were conducted at a shrub-grass transition zone in the northern Chihuahuan desert (New Mexico, USA) using a combination of erosion monitoring techniques, microtopography measurements, infiltration experiments, and isotopic studies. The results indicate that soil erosion is more intense in burned shrub patches compared to burned grass patches and bare interspaces. This enhancement of erosion processes, mainly aeolian, is attributed to the soil–water repellency induced by the burning shrubs, which alters the physical and chemical properties of the soil surface. Further, we show that by enhancing soil erodibility fires allow erosion processes to redistribute resources accumulated by the shrub clumps, thereby leading to a more homogeneous distribution of soil resources. Thus fires counteract or diminish the heterogeneity-forming dynamics of land degradation associated with shrub encroachment by enhancing local-scale soil erodibility. Author Contributions  SR—Conceived of or designed study, performed research, analyzed data, wrote the paper; PD—Conceived of or designed study, performed research, wrote the paper; LW—Performed research, analyzed data; GO—Contributed new methods, analyzed data; SC—Conceived of or designed study; CW—Performed research, contributed new methods or models; and SM—Contributed new methods or models.     

A Nonsense Mutation in a Cinnamyl Alcohol Dehydrogenase Gene Is Responsible for the Sorghum brown midrib6 Phenotype

brown midrib6 (bmr6) affects phenylpropanoid metabolism, resulting in reduced lignin concentrations and altered lignin composition in sorghum (Sorghum bicolor). Recently, bmr6 plants were shown to have limited cinnamyl alcohol dehydrogenase activity (CAD; EC 1.1.1.195), the enzyme that catalyzes the conversion of hydroxycinnamoyl aldehydes (monolignals) to monolignols. A candidate gene approach was taken to identify Bmr6. Two CAD genes (Sb02g024190 and Sb04g005950) were identified in the sorghum genome based on similarity to known CAD genes and through DNA sequencing a nonsense mutation was discovered in Sb04g005950 that results in a truncated protein lacking the NADPH-binding and C-terminal catalytic domains. Immunoblotting confirmed that the Bmr6 protein was absent in protein extracts from bmr6 plants. Phylogenetic analysis indicated that Bmr6 is a member of an evolutionarily conserved group of CAD proteins, which function in lignin biosynthesis. In addition, Bmr6 is distinct from the other CAD-like proteins in sorghum, including SbCAD4 (Sb02g024190). Although both Bmr6 and SbCAD4 are expressed in sorghum internodes, an examination of enzymatic activity of recombinant Bmr6 and SbCAD4 showed that Bmr6 had 1 to 2 orders of magnitude greater activity for monolignol substrates. Modeling of Bmr6 and SbCAD4 protein structures showed differences in the amino acid composition of the active site that could explain the difference in enzyme activity. These differences include His-57, which is unique to Bmr6 and other grass CADs. In summary, Bmr6 encodes the major CAD protein involved in lignin synthesis in sorghum, and the bmr6 mutant is a null allele.Plant cell walls constitute a vast reserve of fixed carbon. Cellulose and lignin are the first and second most abundant polymers on the planet, respectively (Jung and Ni, 1998). The world community has started to look to biomass as substrates for plant-based biologically sustainable fuels, which would mitigate carbon dioxide emission and reduce petroleum dependence (Sarath et al., 2008; Schmer et al., 2008). In the current generation of biofuels, ethanol is being synthesized via the fermentation of grain starch or sugarcane juice. For the next generation of biofuels, research is being directed toward the conversion of lignocellulosic biomass into biofuels (Chang, 2007). As bioenergy technologies progress, the conversion of biomass to biofuels could involve a range of chemical, biochemical, and fermentation processes to produce biofuels; alternate biofuels, such as butanol or dimethylfuran, are also on the horizon (Ezeji et al., 2007; Roman-Leshkov et al., 2007). Most liquid biofuel production processes will likely rely on the conversion of the cell wall polysaccharides cellulose and hemicellulose into monomeric sugars.Plant cell walls consist of a complex polysaccharide moiety composed of cellulose microfibrils, composed of β-1,4-linked Glc polymers (Carpita and McCann, 2000). Connecting the cellulose microfibrils to each other is a hemicellulose network, whose structure and composition are species dependent, and which is mainly composed of glucuronoarabinoxylans in grasses (Carpita and McCann, 2000). Lignin, a nonlinear heterogeneous polymer derived from aromatic precursors, cross-links these polysaccharides, rigidifying and reinforcing the cell wall structure (Carpita and McCann, 2000). The addition of lignin polymers to the polysaccharide matrix creates a barrier that is chemically and microbially resistant.Lignin can block the liberation of sugars from the cell wall polysaccharide moieties, release compounds that can inhibit microbes used for fermenting sugars to fuels, and adhere to hydrolytic enzymes. Understanding lignin synthesis, structure, and function to increase cell wall digestibility has long been a goal for forage improvement and paper processing (Mackay et al., 1997; Jung and Ni, 1998). Recently, manipulating lignin has also become an important target for bioenergy feedstock improvement (Chen and Dixon, 2007; Li et al., 2008).Lignin is derived from the phenylpropanoid pathway and contains primarily three types of phenolic subunits: p-hydroxyphenyl, guaiacyl, and syringyl units (Dixon et al., 2001). The phenolic aldehyde precursors are reduced into their corresponding alcohols (monolignols) and subsequently transported to the cell wall (Fig. 1), where laccases and peroxidases catalyze lignin polymerization through the formation of monolignol radicals (Boerjan et al., 2003). Therefore, most research efforts to manipulate lignin have focused on biosynthesis of the monolignols. Most of the enzymes involved in monolignol synthesis have been cloned and characterized in Arabidopsis (Arabidopsis thaliana) and other dicot species, using both mutagenic and transgenic approaches to study the impact of these gene products on dicot cell walls (Anterola and Lewis, 2002). However, there are significant differences in the architecture, polysaccharide composition, and phenylpropanoid composition of grass cell walls compared with those of dicots (Carpita and McCann, 2000; Vogel and Jung, 2001). For example, grasses contain significant amounts of p-coumaric acid and ferulic acid that are cross-linked to cell wall polysaccharides through ester and ether linkages in addition to their presence in lignin (Grabber et al., 1991; Boerjan et al., 2003). Because many of the proposed dedicated bioenergy crops are grasses, there is a need to identify and understand the function of the gene products involved in lignin biosynthesis in these species (Vermerris et al., 2007; Li et al., 2008; Sarath et al., 2008).Open in a separate windowFigure 1.The CAD enzyme and its role in the monolignol biosynthetic pathway. A, CAD catalyzes the conversion of cinnamyl aldehydes to alcohols using NADPH as its cofactor. p-Coumaryl aldehyde and alcohol, R₁ and R₂ = H; caffeoyl aldehyde and alcohol, R₁ and R₂ = OH; coniferyl aldehyde and alcohol, R₁ = H and R₂ = OCH₃; sinapyl aldehyde and alcohol, R₁ and R₂ = OCH₃. B, A simplified model of the lignin biosynthetic pathway where CAD catalyzes the final step in monolignol biosynthesis.The brown midrib phenotype has been useful for identifying mutants affecting lignin synthesis in grasses because it is a visible phenotype. Spontaneous brown midrib mutants were first discovered in maize (Zea mays; Jorgenson, 1931) and were subsequently generated in sorghum (Sorghum bicolor) using diethyl sulfate mutagenesis (Porter et al., 1978). Brown midrib mutants in maize, sorghum, and pearl millet (Pennisetum glaucum) have increased forage digestibility for livestock (Cherney et al., 1990; Akin et al., 1993; Jung et al., 1998; Oliver et al., 2004). In maize and sorghum, there are at least four brown midrib loci in their respective genomes (Jorgenson, 1931; Porter et al., 1978; Gupta, 1995). The genes encoding bm3 in maize and bmr12 in sorghum are the only loci cloned to date, and both encode highly similar caffeic acid O-methyl transferases (Vignols et al., 1995; Bout and Vermerris, 2003). A second brown midrib locus associated with reduced cinnamyl alcohol dehydrogenase (CAD) activity has been identified both in maize (bm1; Halpin et al., 1998) and sorghum (bmr6; Bucholtz et al., 1980; Pillonel et al., 1991). CAD is a member of the alcohol dehydrogenase superfamily of proteins that catalyzes the conversion of the hydroxycinnamoyl aldehydes into alcohols prior to their incorporation into lignin polymers (Fig. 1). Reduced CAD activity results in increased digestibility on dry weight basis, altered cell wall architecture, reduced lignin level, and the incorporation of phenolic aldehydes into lignin in sorghum and maize (Pillonel et al., 1991; Provan et al., 1997; Halpin et al., 1998; Marita et al., 2003; Shi et al., 2006; Palmer et al., 2008). The reduced CAD activity in bm1 has been genetically mapped to a region of the maize genome that contained a CAD gene, ZmCAD2 (Halpin et al., 1998), but a mutation was not identified. However, it has recently been shown that bm1 down-regulated the expression of several lignin biosynthetic genes, suggesting its gene product may be a regulatory protein (Shi et al., 2006; Guillaumie et al., 2007).To identify the mutation responsible for the bmr6 phenotype and to characterize how bmr6 impacts the lignin biosynthetic pathway, a candidate gene approach was taken. Here, we describe the cloning and characterization of Bmr6 and a related protein, SbCAD4. The identification and characterization of Bmr6 has revealed the major monolignol CAD protein in the grasses, which is likely to aid the development of new strategies to increase conversion of sorghum and other grass feedstocks to biofuels.     

Development of a modular virus clearance package for anion exchange chromatography operated in weak partitioning mode

Anion exchange chromatography (AEX) operated under weak partitioning mode has been proven to be a powerful polishing step as well as a robust viral clearance step in Pfizer's monoclonal antibody (mAb) platform purification process. A multivariate design of experiment (DoE) study was conducted to understand the impact of operating parameters and feedstream impurity levels on viral clearance by weak partitioning mode AEX. Bacteriophage was used initially as a surrogate for neutral and acidic isoelectric point mammalian viruses (e.g., retrovirus and parvovirus). Five different mAbs were used in the evaluation of process parameters such as load challenge (both product and impurities), load pH, load conductivity, and contact time (bed height and flow‐rate). The operating ranges obtained from phage clearance studies and Pfizer's historical data were used to define an appropriate operating range for a subsequent clearance study with model retrovirus and parvovirus. Both phage and virus clearance evaluations included feedstreams containing different levels of impurities such as high molecular mass species (HMMS), host cell proteins (HCPs), and host cell DNA. For all the conditions tested, over 5 log₁₀ of clearance for both retrovirus and parvovirus was achieved. The results demonstrated that weak partitioning mode AEX chromatography is a robust step for viral clearance and has the potential to be included as part of the modular viral clearance approach. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:750–757, 2015     

Region-Oriented and Staged Treatment Strategy in Reconstruction of Severe Cervical Contracture

Introduction

Severe cervical contracture after burns causes obvious impairment of neck movement and the aesthetic silhouette. Although various surgical techniques for treatment have been described, there is not a definitive strategy to guide treatment. Over the past 6 years, we have been utilizing a region-oriented and staged treatment strategy to guide reconstruction of severe cervical contracture. Satisfactory results have been achieved with this strategy.

Methods

The first stage of treatment focuses on the anterior cervical region and submental region. Procedures include cicatrix resection, contracture release, division and elevation of the platysma to form two platysma flaps, and skin grafting. Three to six months later, the second stage treatment is performed, which localize to the mental region. This includes scar resection, correction of the lower lip eversion, and reconstruction with free (para)scapular skin flap. Three subtypes of cervicomental angle that we proposed were measured as quantitative tool for evaluation of the reconstruction.

Results

24 patients who completed the treatment were reviewed. By the 3rd postoperative month, their CM angles changed significantly: the soft tissue CM angle was reduced from 135.0° ± 17.3° to 111.1° ± 11.3°, the osseous CM angle increased from 67.1° ± 9.0° to 90.5° ± 11.6° and the dynamic CM angle increased from 21.9° ± 8.7° to 67.4° ± 13.1°. 22 in 24 (91.7%) of these patients gained notable improvement of cervical motion and aesthetic contour.

Conclusions

Our results suggest that the region-oriented and staged treatment strategy can achieve satisfactory functional and aesthetic results, combining usage of both skin graft and skin flap while minimizing the donor site morbidity.     

Scaling of peak moment arms of elbow muscles with upper extremity bone dimensions.

It is often assumed that moment arms scale with size and can be normalized by body segment lengths or limb circumferences. However, quantitative scaling relationships between moment arms and anthropometric dimensions are generally not available. We hypothesized that peak moment arms of the elbow flexor and extensor muscles scale with the shorter distance (D(s)) between the elbow flexion axis and a muscle's origin and insertion. To test this hypothesis, we estimated moment arms of six muscles that cross the elbow, digitized muscle attachment sites and bone surface geometry, and estimated the location of the elbow flexion axis in 10 upper extremity cadaveric specimens which ranged in size from a 5'0" female to a 6'4" male. D(s) accurately reflected the differences in peak moment arms across different muscles, explaining 93-99% of the variation in peaks between muscles in the same specimen. D(s) also explained between 55% and 88% of the interspecimen variation in peak moment arms for brachioradialis, biceps, and ECRL. Triceps peak moment arm was significantly correlated to the anterior-posterior dimension of the ulna measured at the olecranon (r(2)=0.61, p=0.008). Radius length provides a good measure of the interspecimen variation in peaks for brachioradialis, biceps, and ECRL. However, bone lengths were not significantly correlated to triceps moment arm or anterior-posterior bone dimensions. This work advances our understanding of the variability and scaling dimensions for elbow muscle moment arms across subjects of different sizes.