Synthesis of green emissive terbium(III) complexes for displays: Optical,electrochemical and photoluminescent analysis

A series of heteroleptic terbium(III) complexes with fluorinated 2-thenoyltrifluoroacetone (TTFA) and other heteroaromatic units have been synthesized. The developed heteroleptic complexes were inspected via elemental study, cyclic voltammetry, thermal analysis and spectroscopic investigations. Optical band-gap data proposed the conducting property of prepared complexes. The photoluminescence emission profiles illustrated peaks based on terbium(III) cation (Tb³⁺) positioned at ~617, 586, 546 and 491 nm, imputed to ⁵D₄ to ⁷F_J (J = 3,4,5,6) transitions separately. Most intense peak at 546 nm corresponding to ⁵D₄ → ⁷F₅ transition is accountable for the green emissive character of developed complexes. The luminous character of complexes reveals the sensitization of Tb³⁺ by ligands. Color parameters further corroborates the green emanation of Tb³⁺ complexes. The photometric characteristics of complexes recommended their usages in designing display devices.     

Reversible changes in structure and function of photosynthetic apparatus of pea (Pisum sativum) leaves under drought stress

The effects of drought on photosynthesis have been extensively studied, whereas those on thylakoid organization are limited. We observed a significant decline in gas exchange parameters of pea (Pisum sativum) leaves under progressive drought stress. Chl a fluorescence kinetics revealed the reduction of photochemical efficiency of photosystem (PS)II and PSI. The non-photochemical quenching (NPQ) and the levels of PSII subunit PSBS increased. Furthermore, the light-harvesting complexes (LHCs) and some of the PSI and PSII core proteins were disassembled in drought conditions, whereas these complexes were reassociated during recovery. By contrast, the abundance of supercomplexes of PSII-LHCII and PSII dimer were reduced, whereas LHCII monomers increased following the change in the macro-organization of thylakoids. The stacks of thylakoids were loosely arranged in drought-affected plants, which could be attributed to changes in the supercomplexes of thylakoids. Severe drought stress caused a reduction of both LHCI and LHCII and a few reaction center proteins of PSI and PSII, indicating significant disorganization of the photosynthetic machinery. After 7 days of rewatering, plants recovered well, with restored chloroplast thylakoid structure and photosynthetic efficiency. The correlation of structural changes with leaf reactive oxygen species levels indicated that these changes were associated with the production of reactive oxygen species.     

Plasmodium berghei: oxidant defense system

Glutathione oxidant defense system protects the erythrocyte from oxidative damage. This defense system was studied in mouse erythrocytes infected with Plasmodium berghei and in isolated parasites. The efficiency of this system was found to be increased in parasitized erythrocytes compared to the normal erythrocytes. The increase in the components of the oxidant defense system in the parasitized cells could result from parasitic addition to these components. This defense system present in the parasite may protect the parasite from oxidative damage and help the parasite in its growth and development.     

Genomic engineering of Escherichia coli by the phage attachment site-based integration system with mutant loxP sites

Metabolic engineering of Escherichia coli using plasmids is problematic, which is addressed by developing a toolbox for genomic engineering of E. coli. This toolbox includes the attP site-based integration vectors and the attB site-based template vectors, equipped with mutant loxP sites (i.e., LE* and RE*). The former vectors facilitate integration of passenger genes into attB sites while the latter allows creation of new attB sites. Consequently, the inserted vector backbone is flanked by LE* and RE* sites and can be rescued by Cre. Based on this approach, the biosynthetic pathway of poly(3-hydroxybutyric acid) was first built in E. coli. By scoring the observable phenotype of integrants, the result revealed that the efficiency of gene integration could reach 100%. In addition, reconstruction of the n-butanol-synthesizing pathway in E. coli resulted in a plasmid-free producer strain. As a consequence, the producer strain was able to stably overproduce n-butanol (3.7 g/L) from glucose (20 g/L). Finally, exoglucanase was overexpressed in E. coli that carried multiple genomic copies of the celY gene. Overall, it indicates a promise of our method for cycling improvement of E. coli.     

A novel computational method to determine subject-specific bite force and occlusal loading during mastication

The evaluation of three-dimensional occlusal loading during biting and chewing may assist in development of new dental materials, in designing effective and long-lasting restorations such as crowns and bridges, and for evaluating functional performance of prosthodontic components such as dental and/or maxillofacial implants. At present, little is known about the dynamic force and pressure distributions at the occlusal surface during mastication, as these quantities cannot be measured directly. The aim of this study was to evaluate subject-specific occlusal loading forces during mastication using accurate jaw motion measurements. Motion data was obtained from experiments in which an individual performed maximal effort dynamic chewing cycles on a rubber sample with known mechanical properties. A finite element model simulation of one recorded chewing cycle was then performed to evaluate the deformation of the rubber. This was achieved by imposing the measured jaw motions on a three-dimensional geometric surface model of the subject’s dental impressions. Based on the rubber’s deformation and its material behaviour, the simulation was used to compute the resulting stresses within the rubber as well as the contact pressures and forces on the occlusal surfaces. An advantage of this novel modelling approach is that dynamic occlusal pressure maps and biting forces may be predicted with high accuracy and resolution at each time step throughout the chewing cycle. Depending on the motion capture technique and the speed of simulation, the methodology may be automated in such a way that it can be performed chair-side. The present study demonstrates a novel modelling methodology for evaluating dynamic occlusal loading during biting or chewing.     

Real-time analyte monitoring of a fungal fermentation, at pilot scale, using in situ mid-infrared spectroscopy

Robust in situ biochemical monitoring is essential for the development of substrate feed control to optimize fermentation processes. The scale up of the fermentation for the fungus Glarea lozoyensis can benefit from such technology to improve the yield of the pharmaceutically important pneumocandin of interest and control the levels of unwanted analogues. A new in situ probe, using a diamond attenuated total reflection element, was evaluated at pilot scale for the quantitative measurement of fermentation analytes using Fourier transform mid-IR spectrometry. The new technology was shown to be stable, unaffected by reactor operation conditions of agitation, airflow, and backpressure, but sensitive to temperature control. Both glucose and phosphate were simultaneously monitored during a seed fermentation at 280 L pilot scale using complex medium with detection to 0.1 g/L for both analytes. Fructose, glutamate, and proline were monitored at 75 L scale using production media with detection limits of 0.1, 0.5, and 0.5 g/L respectively. Partial least squares calibration/prediction models were created for analytes of interest using off-line reference measurements and specific spectral regions. Good fits were obtained between off-line measurements and those predicted by in situ mid-IR. Standard errors of prediction (SEP) for glucose (range 18-0.1 g/L) and phosphate (range 11-7.5 g/L) were 0.16 and 1.8 g/L respectively with mean percentage errors (MPEs) around 2.5%. SEP values for the production process: fructose (range 20-0.1 g/L), glutamate (8-0.5 g/L), and proline (12-0.5 g/L) were 0.44, 0.6, and 0.5 g/L respectively with MPEs of 2.2, 5.3, and 10.1%. The technology effectively demonstrates quantitative multicomponent analysis of fermentation processes using in situ monitoring.     

Influences of related retroviruses on lymphocyte functions

Abstract The human immunodeficiency virus (HIV-1) is known to be profoundly immunosuppressive [Spickett and Dalgleish (1988) Clin. Exp. Immunol. 71, 1]. In this communication, we have studied the influences of HIV-1 (BH10), HIV-2 (LAV-2) and STLV-3 on B and T cells from healthy volunteers. B lymphocytes were found to differentiate into immunoglobulin secreting cells in response to stimulation by proteins of HIV-1 and LAV-2, but not by STLV-3. This response was obtained at protein concentrations of 0.05-0.005 μg/ml and was T cell dependent. IgM secretion was induced only by HIV-1 in the EBV-transformed B cell line SKW 6.4. At higher concentrations all three retroviral preparations had inhibitory influences on functions of B as well as T lymphocytes. B cell differentiation was maximally inhibited by HIV-1 and LAV-2 when these proteins were added concurrently to cultures with the polyclonal B cell activators pokeweed mitogen or Epstein-Barr virus. Tetanus antigen-specific T cell lymphoproliferation was inhibited by all retroviral proteins. These findings suggest that related retroviruses differ in their capacity to influence normal immune responses.