An arginine specific carboxypeptidase generated in blood during coagulation or inflammation which is unrelated to carboxypeptidase N or its subunits

An unstable carboxypeptidase N or B like enzyme is generated as a result of coagulation. This enzyme is derived from some plasma component (s) and not from blood cells or platelets. Furthermore, the activity generated is specific for arginine substrates insofar as small synthetic substrates are concerned. The enzyme is unrelated to CPN or any of its subunits or subunit fragments. This transient carboxypeptidase may be involved in the processing and/or scheduling of different functions of bioactive peptides generated during inflammation.     

Discovery of a new type inhibitor of human glyoxalase I by myricetin-based 4-point pharmacophore

The human glyoxalase I (hGLO I), which is a rate-limiting enzyme in the pathway for detoxification of apoptosis-inducible methylglyoxal (MG), has been expected as an attractive target for the development of new anti-cancer drugs. We have previously identified a natural compound myricetin as a substrate transition-state (Zn²⁺-bound MG-glutathione (GSH) hemithioacetal) mimetic inhibitor of hGLO I. Here, we constructed a hGLO I/inhibitor 4-point pharmacophore based on the binding mode of myricetin to hGLO I. Using this pharmacophore, in silico screening of chemical library was performed by docking study. Consequently, a new type of compound, which has a unique benzothiazole ring with a carboxyl group, named TLSC702, was found to inhibit hGLO I more effectively than S-p-bromobenzylglutathione (BBG), a well-known GSH analog inhibitor. The computational simulation of the binding mode indicates the contribution of Zn²⁺-chelating carboxyl group of TLSC702 to the hGLO I inhibitory activity. This implies an important scaffold-hopping of myricetin to TLSC702. Thus, TLSC702 may be a valuable seed compound for the generation of a new lead of anti-cancer pharmaceuticals targeting hGLO I.     

C1q induces chemotaxis and K+ conductance activation coupled to increased cytosolic Ca2+ in mouse fibroblasts

Cultured mouse fibroblasts (L cells) respond to whole C with a slow hyperpolarization. Among the C components tested, C1q was found to be most effective. In contrast, the cell did not respond to C1, in which the collagen-like region of the C1q molecule is masked. The C1q-induced hyperpolarizing response was inhibited by collagen or C1q-specific antisera. Human diploid skin fibroblasts (Flow 1,000 cells) also exhibited similar membrane potential changes in response to whole C or C1q. After repeated applications of C1q, the cell membrane became unresponsive (desensitized). The treatment of L cells with pronase E inhibited the C1q-induced response, whereas the response to ATP, which is known to interact to its own receptor, was still preserved. The reversal potential of C responses was close to the K+ equilibrium potential. The hyperpolarizing response was inhibited by a blocker of Ca2+-activated K+ channels in fibroblasts (quinine), by deprivation of extracellular Ca2+ or by a Ca2+ channel blocker (nifedipine). By means of Ca2+-selective microelectrodes, the cytosolic free Ca2+ concentration was found to increase from 126 to 206 nM upon stimulation of L cells with C1q. Using an agarose-well method, L cells were observed to migrate predominantly toward C1q or whole C. It is concluded that the fibroblasts have the C1q receptor sensitive to pronase E and that activation of C1q receptors gives rise to Ca2+ influx, triggering an increase in the cytosolic free Ca2+ ions, which in turn induces a hyperpolarizing response as a result of the stimulation of Ca2+-activated K+ channels and initiates chemotaxis to C1q.     

Social relationship and hair cortisol level in captive male chimpanzees (<Emphasis Type="Italic">Pan troglodytes</Emphasis>)

Understanding how social relationships affect long-term stress is important because stress has a profound impact on the welfare of animals and social relationships often exert a strong influence on their stress responses. The purpose of this study was to investigate the relationship between social behaviors and long-term stress levels as assessed by hair cortisol (HC) concentration. The subjects were 11 chimpanzees living in an all-male group (divided into two sub-groups) in Kumamoto Sanctuary, Kyoto University, Japan. Behavioral data were collected between December 2014 and March 2015. The total observation time was 129 h. Hair samples were collected in late March and early April 2015, and cortisol was extracted from the hair and measured with enzyme immunoassay. The hair growth rate was estimated to be 1.33 ± 0.06 cm/month. The results revealed that there was a positive correlation between the rate of receiving aggression and HC levels. We also found a significant negative correlation between the balance between giving and receiving grooming (grooming balance index: GBI), which was calculated by subtracting the rate with which grooming is given from that with which it is received, and the rate of receiving aggression and between the GBI and HC levels. Thus, individuals receiving higher levels of aggression also tended to give grooming for relatively long periods compared to the time they were being groomed. In contrast, the rate of initiating aggression did not have a relationship with either HC levels or any measure of social grooming. We did not find social buffering effects, as there was no correlation between mutual social grooming and HC levels. These results show that not only aggressive interactions but also overall social situations in which animals do not have balanced relationships with others might result in the long-term elevation of cortisol levels in captive male chimpanzees.     

From Amino Acid Landscape to Protein Landscape: Analysis of Genetic Codes in Terms of Fitness Landscape

Assigning the values of a certain physicochemical property for individual amino acids to the corresponding codons, we can make an amino acid property "landscape" on a four valued three dimensional sequence space from a genetic code table. Eleven property landscapes made from the standard genetic code (SGC) were analyzed. The evaluation of correlation for each landscape is done by theta value, which represents the ratio of the mean slope (as an additive term) to the degree of roughness (as a nonadditive term). The theta-values for hydropathy indices, polarity, specific heat, and beta-sheet propensity were considerably large with respect to SGC. This implies that the additivity of the contribution from each letter holds for these properties. To clarify the meaning of the so-called mutational robustness of SGC, we next examined correlations between the amino acid property and the actual "site fitnesses" of a protein. The site fitnesses were derived from a set of binding preference scores of amino acid residues at every site in MHC class I molecule binding peptides (Udaka et al. in press). We found that the SGC's theta value for an amino acid property is correlated with the significance of the property in the protein function. Adaptive walk simulation on fitness (= affinity) landscapes in a base sequence space for these model peptides confirmed better evolvability due to the introduction of SGC.     

Root endophytes enhance stress‐tolerance of Cicuta virosa L. growing in a mining pond of eastern Japan

Cicuta virosa L. plants can grow in a pond subjected to heavy‐metal inputs at the Hitachi mine, eastern Japan. They accumulate heavy‐metal elements, especially high concentrations of zinc (Zn), in their roots. We focused on the role that root bacterial endophytes play in the heavy‐metal uptake of plants and the provision of heavy‐metal tolerance within plants. Our purpose was to clarify the effects of endophytes on: (i) Zn accumulation in C. virosa roots; (ii) growth of C. virosa seedlings; and (iii) heavy‐metal tolerance of C. virosa plants. Root endophytic Pseudomonas putida and Rhodopseudomonas sp., which induced the high production of Zn‐chelating compounds, were selected for the seedling inoculation test. The results of the inoculation test demonstrated that both strains of endophytes increased Zn accumulation in C. virosa roots by solubilizing Zn in the sediment. Both strains also increased the growth of seedlings by possible production of indole‐3‐acetic acid in the plant. The heavy‐metal tolerance of C. virosa seedlings was likely promoted by producing metal‐chelating compounds that detoxify the metals in the plant tissues, and by decreasing the heavy‐metal contents in the tissues via rapid seedling growth. Thus, such mutualistic interactions between plants and bacteria contribute to the persistence of C. virosa in this severe environment.     

Evaluation of newly developed devices for denture placement and removal in the dependent elderly

doi: 10.1111/j.1741‐2358.2011.00547.x Evaluation of newly developed devices for denture placement and removal in the dependent elderly Objective: The purpose of this study was to subjectively evaluate the utility of newly developed denture placement and removal devices. Objective observations were also made to support the evidence. Materials and method: Twenty‐one subjects were instructed to place and remove their dentures with and without the devices. We evaluated the device based on a questionnaire. Objective observations were based on a 2‐D image analysis. We analysed three factors: the time, the area and the circumference required to insert and remove the dentures. Results: Image analysis showed that the effectiveness and ease with which the subject used the device significantly improved with practice. The questionnaire data showed that a majority of the subjects appreciated the device after the first and second time. While there was no significant decrease in time required to place and remove dentures even with the device, the area and circumference of the movement on 2‐D images were significantly reduced. Conclusion: In this study, the utility of denture placement and removal devices was evaluated both subjectively and objectively. Our data reveal that the device is effective in the elderly. Further minor improvement in the device might be required to increase its effectiveness.