The translation start codon region is sensitive to antisense PNA inhibition in Escherichia coli

Antisense peptide nucleic acids (PNA) can inhibit bacterial gene expression with gene and sequence specificity. Using attached carrier peptides that aid cell permeation, the antisense effects when targeting essential genes are sufficient to prevent growth and even kill bacteria. However, many design uncertainties remain, including the difficult question of target sequence selection. In this study, we synthesized 90 antisense peptide-PNAs to target sequences in a head to tail manner across the entire length of the mRNA encoding beta-lactamase. The results from this scan pointed to the start codon region as most sensitive to inhibition. To confirm and refine the result, a higher-resolution scan was conducted over the start codon region of the beta-lactamase gene and the essential Escherichia coli acpP gene. For both genes, the start codon region, including the Shine-Dalgarno motif, was sensitive, whereas antisense agents targeted outside of this region were largely ineffective. These results are in accord with natural antisense mechanisms, which typically hinder the start codon region, and the sensitivity of this region should hold true for most bacterial genes as well as for other RNase H-independent antisense agents that rely on a steric blocking mechanism. Therefore, although other design parameters are also important, the start codon region in E. coli mRNA is the most reliable target site for antisense PNAs.     

Liquid chromatography-tandem mass spectrometric quantitative determination of the HIV protease inhibitor atazanavir (BMS-232632) in human peripheral blood mononuclear cells (PBMC): practical approaches to PBMC preparation and PBMC assay design for high-throughput analysis

A selective, accurate, and reproducible LC/MS/MS assay was developed and validated for the determination of the HIV protease inhibitor atazanavir (BMS-232632) in human peripheral blood mononuclear cells (PBMC) samples. In addition to the details of the validated LC/MS/MS method, a practical procedure is described in great detail for the preparation of large supplies of control (blank) PBMC from units of blood (each unit of blood is about 500 ml) for making the calibration standards and quality control (QC) samples. The PBMC assay design, intended for high-throughput sample analysis, is also described in some detail in regards to the composition and concentration expressions of the calibration standards and QC samples, the lysing procedure of the PBMC samples, and the final analysis/quantitation procedure. The method involved automated solid-phase extraction (SPE) of atazanavir and a stable isotope analog internal standard (I.S.) using 3M Empore C2-SD 96-well plates. A portion of the reconstituted sample residue was injected onto a YMC Basic analytical column which was connected to a triple quad mass spectrometer for analyte determination by positive-ion electrospray in the selected reaction monitoring (SRM) mode. The standard curve, which ranged from 5 to 2500 fmol per one million cells (fmol/10(6) cells), was fitted to a quadratic regression model weighted by 1/concentration. The lower limit of quantitation (LLOQ) was 5 fmol/10(6) cells. The inter- and intra-run coefficients of variation (CV) for the assay were <9% and the accuracy was 94-104%. Atazanavir was stable in PBMC for at least 24h at room temperature and for at least 129 days at -15 degrees C.     

Distribution of activated calmodulin in the chloronema tip cells of the moss Funaria hygrometrica

Auxin (indole-3-acetic acid) regulates caulonema differentiation as a result of gradual transitional events in the chloronema tip cells in moss protonema. This auxin action in the moss Funaria hygrometrica involves a rapid influx of calcium ions from the extracellular medium. This investigation demonstrates spatial and temporal changes in calmodulin (CaM) activation (formation of Ca(2+)-CaM complex) in the chloronema tip cells subjected to auxin treatment. Photomicroscopic localisation of the fluorescence (excitation at 365 nm and emission of 397 nm) from the tricomplex of Ca(2+)-CaM with trifluoperazine (TFP, a blocker of Ca(2+)-CaM action) shows a tip to base (tip high) gradient of Ca(2+)-CaM in the chloronema tip cells. Comparison of Ca(2+)-CaM-TFP fluorescence over time in the chloronema tip cells of wild type Funaria with the response in an auxin overproducer mutant (86.1) and an auxin deficient mutant (87.13) reveals the involvement of auxin in calmodulin activation as a rapid response prior to cell differentiation.     

Lysophosphatidylethanolamine acyltransferase activity is elevated during cardiac cell differentiation

This work attempts to explain several aspects of the response of plasminogen to 6-aminohexanoate (6-AH). These responses include the overall fluorescent changes that occur when plasminogen binds the ligand, the changes shown by the individual domains when they bind the ligand, and the changes in structure shown by the holoprotein when it binds 6-AH. The results have implications for understanding the physicochemical behavior of all kringle based proteins.     

Concanavalin A induced apoptosis in murine macrophage PU5-1.8 cells through clustering of mitochondria and release of cytochrome c

Concanavalin A (ConA), normally a mitogen of T-lymphocytes, was found to be a cell cycle-independent apoptosis-inducing agent in cultured murine macrophage PU5-1.8 cells. This assertion is based on the following observations: (1) ConA increased the number of cells with hypo-diploid DNA in a dose dependent manner as revealed by flow cytometry; (2) ConA elicited DNA fragmentation and the cytotoxicity of ConA was suppressed by -D-methylmannoside which blocks the lectin site of ConA; (3) ConA was able to release cytochrome c (cyto c) into the cytosol of PU5-1.8 cells. When isolated mitochondria were incubated with ConA, release of cyto c was observed too. Interestingly, clustering of mitochondria was found in the cytosol under a confocal microscope after ConA treatment. When cells were incubated with ConA-FITC and subsequently with mitotracker red (a probe for mitochondria), co-localization of fluorescence signals was observed. These results suggest that ConA was delivered to the mitochondria, induced mitochondrial clustering and released cyto c. Our results also show that introduction of exogenous cyto c electroporationally into ConA-untreated cells elicited DNA fragmentation. On the other hand, introduction of specific antibody against cyto c into PU5-1.8 cells suppressed the ConA-mediated cell death. Taken together, our results indicate that ConA induced apoptosis in PU5-1.8 cells through mitochondrial clustering and release of cyto c and the release of cyto c was sufficient to elicit apoptosis in PU5-1.8 cells.     

Evaluation of a new apolipoprotein(a) isoform-independent assay for serum Lipoprotein(a)

The risk factor, Lipoprotein(a), [(Lp(a)], has been measured in numerous clinical studies by a variety of immunochemical assay methods. It is becoming apparent that for many of these assays antibody specificity towards the apolipoprotein(a) [apo(a)] repetitive component [the kringle 4 - type 2 repeats] and apo(a) size heterogeneity can significantly affect the accuracy of serum Lp(a) measurements. To address this issue, we investigated whether our current in house Lp(a) [Mercodia] assay showed such bias compared to a recently available assay [Apo-Tek], claiming to possess superior capability for isoform-independent measurement of Lp(a). Levels of Lipoprotein(a) by both Apo-Tek and Mercodia assays correlated inversely with apo(a) isoform sizes. No significant differences were observed between assays in ranges of Lp(a) concentration within each isoform group. The Mercodia assay exhibited similar isoform-independent behaviour to that of Apo-Tek for e quantitation of serum Lipoprotein(a). Essentially identical results were obtained by the two methods, suggesting that Mercodia assay's capture monoclonal antibody also (as is the case for Apo-Tek) does not recognize the kringle 4-type 2 repetitive domain of apo(a). Correlation of Lp(a) concentrations in patient specimens between Apo-Tek and Mercodia assays showed good agreement, although an overall higher degree of imprecision and non-linearity was noted for the Apo-Tek procedure. A change-over to the Apo-Tek assay would therefore not improve on our current assessment of risk contribution from Lp(a) for atherosclerotic vascular disease in individuals with measurable levels of circulating Lipoprotein(a).     

Atherosclerosis risk factors: the possible role of homocysteine

Atherosclerosis is the leading cause of death in North America. It is characterized by thickening of the coronary artery wall by the formation of plaques, resulting in reduced blood flow. Plaque rupture and the consequent thrombosis may lead to sudden blockage of arteries and causing stroke and heart attack. In the last several decades, more than 250 factors associated with the development of coronary artery disease have been identified. Recently, a relationship between atherosclerosis and elevated homocysteine level in the blood has been established. The mechanism for the production of atherosclerosis by homocysteine has been investigated. When human hepatoma cells (HepG2) were incubated with 4mM homocysteine, enhancements in the production of cholesterol and secretion of apolipoprotein B-100 were observed. The stimulatory effect on cholesterol synthesis was mediated via the enhancement of HMG-CoA reductase, which catalyzes the rate-limiting step in cholesterol biosynthesis. Cholesterol appears to play an important role in the regulation of apoB-100 secretion by hepatocytes. It is plausible that the increase in apoB secretion was caused by the elevated cholesterol level induced by homocysteine. The ability of homocysteine to produce a higher amount of cholesterol and promote the secretion of apoB would provide a plausible mechanism for the observed relationship between hyperhomocysteinemia and the development of atherogenesis and coronary artery disease.