Cadmium exposure in tobacco workers: possible renal effects.

Cadmium is a nephrotoxic metal widely used in industry and the main source of Cd in general population is smoking. Considering that the source of Cd in cigarettes is the tobacco leaf, the exposure to Cd was evaluated in workers employed at a tobacco leaf processing factory. Blood and urinary Cd levels were measured by flameless atomic absorption spectrometry in 87 workers and 35 controls. Urinary enzymes, total protein, albumin and uric acid were also determined to investigate the possible nephrotoxic effects of Cd. Blood Cd levels were significantly higher in workers (1.63 +/- 1.95 microg/L) than in controls (0.91 +/- 1.15 microg/L) (p = 0.044). The increase observed in urinary Cd levels of workers was non significant (0.56 +/- 0.5 microg/g creatinine in workers and 0.46 +/- 0.5 microg/g creatinine in controls). Both in workers and in controls, subjects smoking >10 cigarettes/day showed significantly increased blood Cd levels compared to non-smokers (p = 0.000 and p = 0.011, respectively). In workers, urinary alkaline phosphatase (ALP), gamma glutamyl transferase (GGT), total protein, and uric acid were observed to be significantly increased (p = 0.013, p = 0.000, p = 0.000, p = 0.025, respectively), ALP, GGT and total protein being positively correlated with Cd in urine. In conclusion, the workers in the tobacco leaf processing factory were found to be exposed to Cd compared to the general population. The increase in the urinary enzymes and proteins suggests that an exposure to Cd affects kidney functions even below the toxic limits generally accepted.     

Formulation and Optimization of Nonionic Surfactants Emulsified Nimesulide-Loaded PLGA-Based Nanoparticles by Design of Experiments

This investigation aimed to develop nimesulide (NMS)-loaded poly(lactic-co-glycolic acid) (PLGA)-based nanoparticulate formulations as a biodegradable polymeric drug carrier to treat rheumatoid arthritis. Polymeric nanoparticles (NPs) were prepared with two different nonionic surfactants, vitamin E d-α-tocopheryl polyethylene glycol 1000 succinate (vitamin E TPGS) and poly(vinyl alcohol) (PVA), using an ultrasonication solvent evaporation technique. Nine batches were formulated for each surfactant using a 3² factorial design for optimal concentration of the emulsifying agents, 0.03–0.09% for vitamin E TPGS and 2–4% for PVA. The surfactant percentage and the drug/polymer ratio (1:10, 1:15, 1:20) of the NMS-loaded NPs were investigated based on four responses: encapsulation efficiency, particle size, the polydispersity index, and the surface charge. The response surface plots and linearity curves indicated a relationship between the experiment’s responses and a set of independent variables. The NPs produced with both surfactants exhibited a negative surface charge, and scanning electron micrographs revealed that all of the NPs were spherical in shape. A narrower size distribution and higher drug loadings were achieved in PVA-emulsified PLGA NPs than in the vitamin E TPGS emulsified. Decreasing amounts of both nonionic surfactants resulted in a reduction in the emulsion’s viscosity, which led to a decrease in the particle size of NPs. According to the ANOVA results obtained in this present research, vitamin E TPGS exhibited the best correlation between the independent variables, namely drug/polymer ratio and the surfactant percentage, and the dependent variables (encapsulation efficiency R² = 0.9603, particle size R² = 0.9965, size distribution R² = 0.9899, and surface charge R² = 0.8969) compared with PVA.KEY WORDS: ANOVA, factorial design, nanoparticles, nimesulide, PLGA, PVA, vitamin E TPGS     

Synthesis and antioxidant properties of novel benzimidazole derivatives

Some novel benzimidazole derivatives carrying thiosemicarbazide and triazole moieties at the N1 position were synthesized and their in vitro effects on rat liver microsomal NADPH-dependent lipid peroxidation (LP) levels determined by measuring the formation of 2-thiobarbituric acid reactive substance. The free radical scavenging properties of the compounds were also examined in vitro by determining the capacity to scavenge superoxide anion formation and the interaction with the stable free radical 2,2-diphenyl-1-picrylhydrazyl (DPPH). The compounds showed a significant effect in the above tests except to scavenge superoxide anion formation.     

Antitumor activity of chitosan from mayfly with comparison to commercially available low,medium and high molecular weight chitosans

Insects’ cuticles have a potential to be evaluated as a chitin source. Especially adults of aquatic insects like mayflies (order Ephemeroptera) swarm in enormous numbers in artificially lit areas while mating in spring and then die by leaving huge amounts of dead insects’ bodies. Here in this study, mayfly corpses were harvested and used for production of low MW chitosan. Dried mayfly bodies had 10.21% chitin content; mayfly chitin was converted into chitosan with efficiency rate of 78.43% (deacetylation degree, 84.3%; MW, 3.69 kDa). Cytotoxicity and anti-proliferative activity of mayfly and commercially available shrimp chitosans (low, medium, and high MW) were determined on L929 fibroblast and three different cancer types including HeLa, A549, and WiDr. Apoptosis and necrosis stimulating potential of mayfly and commercial chitosans were also evaluated on A549 and WiDr cells using acridine orange and propidium iodide dual staining to observe morphological changes in nuclei and thus to reveal the predominant cell death mechanism. The effects of chitosans have varied depending on cell types, concentration, and chitosan derivatives. Mayfly and low MW chitosans had a cytotoxic effect at a concentration of 500 μg mL^?1 on non-cancer cells. At concentrations below this value (250 μg mL^?1), mayfly and commercial chitosans except high MW one exhibited strong inhibitory activity on cancer cells especially A549 and WiDr cells. Mayfly chitosan induced early and late apoptosis in A549 cells, but late apoptosis and necrosis in WiDr cells. This study suggests that dead bodies of mayflies can be used for production of low MW chitosan with anti-proliferative activity.     

CEP128 Localizes to the Subdistal Appendages of the Mother Centriole and Regulates TGF-β/BMP Signaling at the Primary Cilium

1. Download high-res image (176KB)
2. Download full-size image

     

Highly Fibrous and Porous Raw Material Shaped Chitin Isolated from <Emphasis Type="Italic">Oniscus</Emphasis> sp. (Crustacea)

Chitin was isolated from a crustacean by keeping the original body shape for the first time. The isolation method followed in this study was simple and time and energy saving unlike the labor-intensive classical methods. Chitin samples preserving the original shape were isolated from Isopoda (Oniscus sp.) successfully in a total of 20 min including filtration time. FT-IR, XRD and TGA analysis and chitinase digestion test demonstrated that the chitin was pure, low crystalline (Crystalline index: 51 %) and had low thermal stability (maximum degradation temperature: 328.8 °C). SEM analysis revealed the highly fibrous structure of chitin. The chitin content of the whole body was found significantly higher (29.6?±?4.2 %) than the earlier reports. Interaction of chitin isolates with Bovine Serum Albumin protein were studied at different pH. It was concluded that this three dimensional raw material shaped chitin can be effectively used in any adsorption studies due to 1) highly fibrous and porous nature, 2) low crystallinity and 3) low thermal stability. And also this biodegradable and biocompatible biopolymer can be suggested as a carrier matrix in further studies thanks to its three dimensional shape.     

Differentiations of Chitin Content and Surface Morphologies of Chitins Extracted from Male and Female Grasshopper Species

In this study, we used Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), and scanning electron microscopy (SEM) to investigate chitin structure isolated from both sexes of four grasshopper species. FT-IR, EA, XRD, and TGA showed that the chitin was in the alpha form. With respect to gender, two main differences were observed. First, we observed that the quantity of chitin was greater in males than in females and the dry weight of chitin between species ranged from 4.71% to 11.84%. Second, using SEM, we observed that the male chitin surface structure contained 25 – 90nm wide nanofibers and 90 – 250 nm nanopores, while no pores or nanofibers were observed in the chitin surface structure of the majority of females (nanofibers were observed only in M. desertus females). In contrast, the elemental analysis, thermal properties, and crystalline index values for chitin were similar in males and females. Also, we carried out enzymatic digestion of the isolated chitins using commercial chitinase from Streptomyces griseus. We observed that there were no big differences in digestion rate of the chitins from both sexes and commercial chitin. The digestion rates were for grasshoppers’ chitins; 88.45–95.48% and for commercial chitin; 94.95%.     

Quantitative paleo-estimation: hypothetical experiments with extrapolation and the no-analog problem

We experiment with artificial data to test the response of five numerical techniques in extrapolating paleo-environments for no-analog conditions. No-analog conditions are those beyond the technique calibration (modern) data set and will be encountered in applications to the geologic past, though they may not be easy to recognize. In the ideal, a numerical technique will correctly extrapolate to no-analog conditions. Failing this, the technique will have a consistent, predictable error response to increasing no-analog conditions, as these are measured by a reliable index. The no-analog conditions that we used are a natural extension of the calibration conditions we created. Thus we test techniques for their response to shifting environmental conditions rather than for factors unrelated to the ecology of the taxa (e.g. post-depositional fossil preservation). Five numerical techniques we test with our hypothetical data are (1) multivariate regression of species percents, (2) correlation-based principal components with linear regression, (3) covariance-based principal components with linear regression, (4) correlation-based principal components with non-linear regression, and (5) the Imbrie and Kipp technique. All the techniques show increasing estimation error as conditions depart from those of the calibration data set. There are two main causes of error in our estimates: (1) the distorting effects of matrix closure on taxon abundances; and (2) generation of ratio no-analogs among species abundances because of non-linear responses to conditions departing progressively from the calibration range. With all the techniques, the distribution of error for no-analog conditions is complex. Non-linear regression with factors shows the least predictable error response. We found that currently developed no-analog indicators do not have a good correlation to estimation error. This means that better indicators, more closely linked to the accuracy of estimates, need to be developed.     

Association mapping of loci linked to copper,phosphorus, and potassium concentrations in the seeds of C. arietinum and C. reticulatum

Due to its high nutritional value, chickpea is one of the most important and cost-effective legumes for human diet. Nutrient elements, such as Cu, P, K have numerous essential functions for the human metabolism. In this study, association mapping of loci linked to the seed Cu, P and K concentrations were performed on a population consisting of 107 Cicer reticulatum and 73 Cicer arietinum individuals in four environments (two locations x two years). A total of 121,840 SNPs were genotyped across 180 individuals by GBS analysis. The association mapping between the SNP markers and the seed Cu, P, K concentrations were identified and eight SNPs were found to be significantly associated with variations in three nutrient elements in more than two environments This research suggests that association mapping is a useful methodology for the identification of loci controlling the Cu, P and K uptake in chickpea seeds for further association mapping, molecular breeding, and marker-assisted selection and plant breeding studies and provides a broader understanding of the relationship between the investigated Cicer species and the effects of environmental conditions.