Differential requirements for FGF3, FGF8 and FGF10 during inner ear development

FGF signaling is required during multiple stages of inner ear development in many different vertebrates, where it is involved in induction of the otic placode, in formation and morphogenesis of the otic vesicle as well as for cellular differentiation within the sensory epithelia. In this study we have looked to define the redundant and conserved roles of FGF3, FGF8 and FGF10 during the development of the murine and avian inner ear. In the mouse, hindbrain-derived FGF10 ectopically induces FGF8 and rescues otic vesicle formation in Fgf3 and Fgf10 homozygous double mutants. Conditional inactivation of Fgf8 after induction of the placode does not interfere with otic vesicle formation and morphogenesis but affects cellular differentiation in the inner ear. In contrast, inactivation of Fgf8 during induction of the placode in a homozygous Fgf3 null background leads to a reduced size otic vesicle or the complete absence of otic tissue. This latter phenotype is more severe than the one observed in mutants carrying null mutations for both Fgf3 and Fgf10 that develop microvesicles. However, FGF3 and FGF10 are redundantly required for morphogenesis of the otic vesicle and the formation of semicircular ducts. In the chicken embryo, misexpression of Fgf3 in the hindbrain induces ectopic otic vesicles in vivo. On the other hand, Fgf3 expression in the hindbrain or pharyngeal endoderm is required for formation of the otic vesicle from the otic placode. Together these results provide important insights into how the spatial and temporal expression of various FGFs controls different steps of inner ear formation during vertebrate development.     

Extensive unfolding of the C-LytA choline-binding module by submicellar concentrations of sodium dodecyl sulphate

We have investigated the stability of the choline-binding module C-LytA against sodium dodecyl sulphate (SDS)-induced unfolding at pH 7.0 and 20 degrees C. A major intermediate with an unfolded N-terminal region accumulates at around 0.75 mM SDS, whereas 2.0 mM SDS was sufficient for a complete unfolding. This might be the first report of a protein being extensively unfolded by submicellar concentrations of SDS, occurring through formation of detergent clusters on the protein surface. All transitions were reversible upon SDS complexation with beta-cyclodextrin, allowing the calculation of thermodynamic parameters. A model for the unfolding of C-LytA by SDS is presented and compared to a previous denaturation scheme by guanidine hydrochloride.     

Cdc15 is required for spore morphogenesis independently of Cdc14 in Saccharomyces cerevisiae

In Saccharomyces cerevisiae exit from mitosis requires the Cdc14 phosphatase to reverse CDK-mediated phosphorylation. Cdc14 is released from the nucleolus by the Cdc14 early anaphase release (FEAR) and mitotic exit network (MEN) pathways. In meiosis, the FEAR pathway is essential for exit from anaphase I. The MEN component Cdc15 is required for the formation of mature spores. To analyze the role of Cdc15 during sporulation, a conditional mutant in which CDC15 expression was controlled by the CLB2 promoter was used. Cdc15-depleted cells proceeded normally through the meiotic divisions but were unable to properly disassemble meiosis II spindles. The morphology of the prospore membrane was aberrant and failed to capture the nuclear lobes. Cdc15 was not required for Cdc14 release from the nucleoli, but it was essential to maintain Cdc14 released and for its nucleo-cytoplasmic transport. However, cells carrying a CDC14 allele with defects in nuclear export (Cdc14-DeltaNES) were able to disassemble the spindle and to complete spore formation, suggesting that the Cdc14 nuclear export defect was not the cause of the phenotypes observed in cdc15 mutants.     

Deletion study of DNA topoisomerase IB from Leishmania donovani: searching for a minimal functional heterodimer

The substantial differences between trypanosomal and leishmanial DNA topoisomerase IB concerning to their homologues in mammals have provided a new lead in the study of the structural determinants that can be effectively targeted. Leishmania donovani, the causative agent of visceral leishmaniasis, contains an unusual heterodimeric DNA topoisomerase IB. The catalytically active enzyme consists of a large subunit (LdTopIL), which contains the non-conserved N-terminal end and the phylogenetically conserved "core" domain, and of a small subunit (LdTopIS) which harbors the C-terminal region with the characteristic tyrosine residue in the active site. Heterologous co-expression of LdTopIL and LdTopIS genes in a topoisomerase I deficient yeast strain, reconstitutes a fully functional enzyme LdTopIL/S which can be used for structural studies. An approach by combinatorial cloning of deleted genes encoding for truncated versions of both subunits was used in order to find out structural insights involved in enzyme activity or protein-protein interaction. The role played by the non-conserved N-terminal extension of LdTopIL in both relaxation activity and CPT sensitivity has been examined co-expressing the full-length LdTopIS and a fully active LdTopIDeltaS deletion with several deletions of LdTopIL lacking growing sequences of the N-terminal end. The sequential deletion study shows that the first 26 amino acids placed at the N-terminal end and a variable region comprised between Ala548 to end of the C-terminal extension of LdTopIL were enzymatically dispensable. Altogether this combinatorial approach provides important structural insights of the regions involved in relaxation activity and for understanding the atypical structure of this heterodimeric enzyme.     

Simultaneous analysis of lysine, Nepsilon-carboxymethyllysine and lysinoalanine from proteins

Protein quality was assayed by simultaneous measurement of lysine (Lys), carboxymethyllysine (CML) and lysinoalanine (LAL). GC-FID analysis of N-tert-butyl dimethylsilyl (tBDMSi) derivatives of these amino acids was undertaken. tBDMSi derivates were separated on a CP-SIL 5CB commercially fused silica capillary column (25 m x 0.25 mm i.d., 0.25 microm film thickness) employing a thermal gradient programmed from 200 to 300 degrees C. The identity of tBDMSi derivatives of Lys, CML and LAL was established by GC-MS while FID detection was employed for quantification. Analytical parameters such as linearity (lysine 350-4200 microM, LAL 3-81 microM, CML 16-172 microM), precision (1-13% variation coefficients), accuracy (85-108% average recovery) and limits of detection (lysine 0.4 mg/100 g protein, LAL 5.0 mg/100 g protein, CML 3.4 mg/100 g protein) and quantification (lysine 1.4 mg/100g protein, LAL 15.2 mg/100 g protein, CML 11.2 mg/100 g protein) were determined for validation of the analytical approach. Model systems and real foods have been studied. Kinetic of CML formation from different food proteins (BSA, soy protein, casein and gluten) was performed employing model systems. Carboxymethylation rate depended on the source of protein. Maillard reaction progressed to advanced stages damaging the protein quality of stored infant foods, soy drinks, boiled eggs and dry powdered crepes. CML values ranged from 62 to 440 mg/100 g protein were measured. LAL was also formed during boiling eggs (21-68 mg/100g protein) indicating additional damage by crosslinking reaction. In agreement, lysine content was affected by both food processing and storage.     

Recombinant BCG vaccine candidates

Given the variable protective efficacy provided by Mycobacterium bovis BCG (Bacillus Calmette-Guérin), there is a concerted effort worldwide to develop better vaccines that could be used to reduce the burden of tuberculosis. Recombinant BCG (rBCG) are vaccine candidates that offer some potential in this area. In this paper, we will discuss the molecular methods used to generate rBCG, and the results obtained with some of these new vaccines as compared with the conventional BCG vaccine in diverse animal models. Tuberculosis vaccine candidates based on rBCG are promising candidates, and some of them are now being tested in clinical trials.     

Parameterization of the stomatal component of the DO3SE model for Mediterranean evergreen broadleaf species

An ozone (O3) deposition model (DO3SE) is currently used in Europe to define the areas where O3 concentrations lead to absorbed O3 doses that exceed the flux-based critical levels above which phytotoxic effects would be likely recorded. This mapping exercise relies mostly on the accurate estimation of O3 flux through plant stomata. However, the present parameterization of the modulation of stomatal conductance (g(s)) behavior by different environmental variables needs further adjustment if O3 phytotoxicity is to be assessed accurately at regional or continental scales. A new parameterization of the model is proposed for Holm oak (Quercus ilex), a tree species that has been selected as a surrogate for all Mediterranean evergreen broadleaf species. This parameterization was based on a literature review, and was calibrated and validated using experimentally measured data of g(s) and several atmospheric and soil parameters recorded at three sites of the Iberian Peninsula experiencing long summer drought, and very cold and dry winter air (El Pardo and Miraflores) or milder conditions (Tietar). A fairly good agreement was found between modeled and measured data (R2 = 0.64) at Tietar. However, a reasonable performance (R2 = 0.47-0.62) of the model was only achieved at the most continental sites when g(s) and soil moisture deficit relationships were considered. The influence of root depth on g(s) estimation is discussed and recommendations are made to build up separate parameterizations for continental and marine-influenced Holm oak sites in the future.     

Ozone in Spain's national parks and protected forests

In general, it is difficult to measure air pollutant concentrations in remote areas, as they are mostly national parks and protected areas. Passive samplers provide an accurate and inexpensive method for measuring cumulative exposures of different air pollutants. They have been used to collect ozone data in both laboratory and field at different geographical scales. The objective of the present study is to fill the knowledge gap regarding air quality in remote areas of Spain, such as national parks and protected areas. Because there were no systematic data sets on the main air pollutants that could affect these areas, an air quality measurement network was established between 2001 and 2004 on 19 locations inside Spanish national parks and protected areas. The data collected suggest that ozone levels in mountainous areas are high enough to affect sensitive vegetation. Most of the locations registered moderate-to-high ozone levels, with important interannual variability. Altitudinal ozone gradients were observed in most of the parks with complex topography due to the establishment of local circulations that incorporate polluted air masses from polluted airsheds or even long-range transport (i.e., Canary Islands). Different latitude-dependent, yearly cycles were also observed, showing two, one, or no clear peaks depending on the region. These findings extend to the most southerly locations, except in the Canary Islands, where pollution transported from other regions in the upper transport layers probably led to the high concentrations observed.     

Factors modelling population structure in brown trout Salmo trutta L.: genetic monitoring of populations in Esva River (northwestern Spain)

Hydrobiologia - In brown trout (Salmo trutta L.), spatial patterns of population structure have been extensively studied. However, less attention has been paid to the short-term temporal stability...