Characterization of Aqueous Dispersions and Gels Made of Sodium Caseinate and Basil Seed Gum: Phase Behavior,Rheology, and Microstructure

The interactions between sodium caseinate (NaCas) and basil seed gum (BSG) in the presence of calcium chloride (CaCl₂) were investigated. The phase behavior of the mixed aqueous dispersions and their gels revealed a homogeneous mixture, obtained at the higher concentrations of both CaCl₂ and BSG. The Herschel-Bulkley model sufficiently fitted the flow behavior of the mixture solution data. Apparent viscosity increased significantly (p < 0.05) by increasing the concentration of BSG, where the addition of CaCl₂ had no significant effect on the viscosity of the samples (p > 0.05). Furthermore, there was an increase in thixotropy due to the higher concentrations of BSG and CaCl₂. Based on the frequency sweep test, at the low frequencies, a more gel-like behavior was observed in the case of the higher concentrations of either BSG or CaCl₂. The rheological and SEM data suggested that the stronger structure of NaCas-BSG gel in the presence of the higher concentrations of CaCl₂ was related to the induction of complex formation between the two biopolymers.

     

Countrywide Survey for MERS-Coronavirus Antibodies in Dromedaries and Humans in Pakistan

Middle East Respiratory Syndrome Coronavirus (MERS-CoV) is a zoonotic pathogen capable of causing severe respiratory disease in humans. Although dromedary camels are considered as a major reservoir host, the MERS-CoV infection dynamics in camels are not fully understood. Through surveillance in Pakistan, nasal (n = 776) and serum (n = 1050)samples were collected from camels between November 2015 and February 2018. Samples were collected from animal markets, free-roaming herds and abattoirs. An in-house ELISA was developed to detect IgG against MERS-CoV. A total of 794 camels were found seropositive for MERS-CoV. Prevalence increased with the age and the highest seroprevalence was recorded in camels aged [ 10 years (81.37%) followed by those aged 3.1–10 years (78.65%) and B 3 years (58.19%).Higher prevalence was observed in female (78.13%) as compared to male (70.70%). Of the camel nasal swabs, 22 were found to be positive by RT-qPCR though with high Ct values. Moreover, 2,409 human serum samples were also collected from four provinces of Pakistan during 2016–2017. Among the sampled population, 840 humans were camel herders.Although we found a high rate of MERS-CoV antibody positive dromedaries (75.62%) in Pakistan, no neutralizing antibodies were detected in humans with and without contact to camels.     

Social life cycle assessment for material selection: a case study of building materials

Purpose

Sustainability of a material-based product mainly depends on the materials used for the product itself or during its lifetime. A material selection decision should not only capture the functional performance required but should also consider the economical, social, and environmental impacts originated during the product life cycle. There is a need to assess social impacts of materials along the full life cycle, not only to be able to address the “social dimension” in sustainable material selection but also for potentially improving the circumstances of affected stakeholders. This paper presents the method and a case study of social life cycle assessment (S-LCA) specialized for comparative studies. Although the authors’ focus is on material selection, the proposed methodology can be used for comparative assessment of products in general.

Methods

The method is based on UNEP/SETAC “guidelines for social life-cycle assessment of products” and includes four main phases: goal and scope definition, life cycle inventory analysis, life cycle impact assessment, and life cycle interpretation. However, some special features are presented to adjust the framework for materials comparison purpose. In life cycle inventory analysis phase, a hot spot assessment is carried out using material flow analysis and stakeholder and experts’ interviews. Based on the results of that, a pairwise comparison method is proposed for life cycle impact assessment applying analytic hierarchy process. A case study was conducted to perform a comparative assessment of the social and socio-economic impacts in life cycle of concrete and steel as building materials in Iran. For hot spot analysis, generic and national level data were gathered, and for impact assessment phase, site-specific data were used.

Result and discussion

The unique feature of the proposed method compared with other works in S-LCA is its specialty to materials and products comparison. This leads to some differences in methodological issues of S-LCA that are explained in the paper in detail. The case study results assert that “steel/iron” in the north of Iran generally has the better social performance than “concrete/cement.” However, steel is associated with many negative social effects in some subcategories, e.g., freedom of association, fair salary, and occupational health in extraction phase. Against, social profile of concrete and cement industry is damaged mainly due to the negative impact of cement production on safe and healthy living condition. The case study presented in this article shows that the evaluation of social impacts is possible, even if the assessment is always affected by subjective value systems.

Conclusions

Application of the UNEP/SETAC guidelines in comparative studies can be encouraged based on the results of this paper. It enables a hotspot assessment of the social and socio-economic impacts in life cycle of alternative materials. This research showed that the development of a specialized S-LCA approach for materials and products comparison is well underway although many challenges still persist. Particularly characterization method in life cycle impact assessment phase is challenging. The findings of this case study pointed out that social impacts are primarily connected to the conduct of companies and less with processes and materials in general. These findings confirm the results of Dreyer et al. (Int J Life Cycle Assess 11(2):88–97, 2006). The proposed approach aims not only to identify the best socially sustainable alternative but also to reveal product/process improvement potentials to facilitate companies to act socially compatible. It will be interesting to apply the UNEP/SETAC approach of S-LCA to other materials and products; materials with a more complex life cycle will be a special challenge. As with any new method, getting experience on data collection and evaluation, building a data base, integrating the method in software tools, and finding ways for effective communication of results are important steps until integrating S-LCA in routine decision support.     

Hypoglycemic and Hypolipidemic Effects of Leucine,Zinc, and Chromium,Alone and in Combination,in Rats with Type 2 Diabetes

The main objective was to determine the elemental profile of the lung lining fluid of rats which are used as model animals in various experiments. Lung lining fluid elemental constitution obtained after bronchoalveolar lavage fluid (BALF) was analyzed by inductively coupled plasma mass spectrometry (ICP-MS) to determine the biological trace elements along with calcium and magnesium. BALF was collected from healthy rats using a tracheal cannula. However, cells in BALF were counted to monitor any underlying inflammatory lung condition. Cell free BALF samples were processed and analyzed for the elements including magnesium (Mg), calcium (Ca), chromium (Cr), manganese (Mn), iron (Fe), nickel (Ni), copper (Cu), zinc (Zn), selenium (Se), bromine (Br), and iodine (I). In view of this, calcium concentration was the highest (6318.08 ± 3094.3 μg/L) and copper concentration was the lowest (0.89 ± 0.21 μg/L). The detected elements, from high to low concentration, include Ca > Mg > Fe > Br > I > Cr > Ni > Zn > Mn > Se > Cu. Pearson’s correlation analysis revealed no significant correlation between cell count and concentration of any of the element detected in BALF. Correlation analysis also revealed significant positive correlation among Fe, I, Cr, Ni, and Mn. Ca was found to be correlated negatively with Cu and positively with Se. Br and Mg found to be positively correlated with each other. Zn remained the only element that was not found to be correlated with any of the elements in the rat BALF.     

Switching among natal and auxiliary hosts increases vulnerability of Spodoptera exigua (Hübner) (Lepidoptera: Noctuidae) to insecticides

The role of insecticidal application and host plant resistance in managing Spodoptera exigua has been well documented, but the effect of different host plants, on which the pest cycles its population in the field, has seldom been investigated. Therefore, we have studied the vulnerability of S. exigua against commonly used insecticides (cypermethrin, chlorpyrifos, lufenuron, and emamectin benzoate) with different mode of actions when it switches its generations from natal to auxiliary hosts and vice versa. Different field populations being established on different host plants including castor, cauliflower, cotton, okra, and spinach were collected and reared in the laboratory before insecticidal bioassays. The role of larval diet and host plant switching on their response to tolerate applied insecticides was studied using leaf‐dip bioassay methods. Host switching demonstrated a significant role in altering the vulnerability of S. exigua populations to tested insecticides. Spodoptera exigua sourced from castor, when switched host to okra and spinach, exhibited 50% higher mortality when treated with emamectin benzoate. This trend in mortality was consistent upon complete host switch cycle (natal—auxiliary—natal host). However, the highest increase (92%) in vulnerability was recorded when the larvae were shifted to spinach from cotton. In general, chlorpyrifos and lufenuron had highest efficacies in terms of larval mortality. The findings of present studies provide insights to a better understanding the behavior of polyphagous pests and the role of different host plants in altering the susceptibility of these pests against applied insecticides. Ultimately the results warrant that due consideration should be given to cropping patterns and time of host switching by pest population during planning and executing chemical control.     

An 18 kDa Acid Phosphatase from Chicken Heart Possesses Phosphotransferase Activity

A low molecular weight acid phosphatase was purified to homogeneity from chicken heart with a specific activity of 42 U/mg and a recovery of about 1%. Nearly 800 fold purification was achieved. The molecular weight was estimated to be 18 kDa by SDS-polyacrylamide gel electrophoresis. Para-nitrophenyl phosphate, phenyl phosphate and flavin mononucleotide were efficiently hydrolysed by the enzyme and found to be good substrates. Fluoride and tartrate had no inhibitory effect while phosphate, vanadate and molybdate strongly inhibited the enzyme. The acid phosphatase was stimulated in the presence of glycerol, ethylene glycol, methanol, ethanol and acetone, which reflected the phosphotransferase activity. When phosphate acceptors such as ethylene glycol concentrations were increased, the ratio of phosphate transfer to hydrolysis was also increased, demonstrating the presence of a transphosphorylation reaction where an acceptor can compete with water in the rate limiting step involving hydrolysis of a covalent phospho enzyme intermediate. Partition experiments carried out with two substrates, para-nitrophenyl phosphate and phenyl phosphate, revealed a constant product ratio of 1.7 for phosphotransfer to ethylene glycol versus hydrolysis, strongly supporting the existence of common covalent phospho enzyme intermediate. A constant ratio of K _cat/K _m, 4.3×10⁴, found at different ethylene glycol concentrations, also supported the idea that the rate limiting step was the hydrolysis of the phospho enzyme intermediate.     

Conceptual Method of Temperature Sensation in Bionic Hand by Extraordinary Perceptual Phenomenon

Lack of temperature sensation of myoelectric prosthetic hand limits the daily activities of amputees.To this end,a non-invasive temperature sensation method is proposed to train amputees to sense temperature with psychophysical sensory substitution.In this study,22 healthy participants took part besides 5 amputee participants.The duration time of the study was 31 days with five test steps according to the Leitner technique.An adjustable temperature mug and a Peltier were used to change the temperature of the water/phantom digits to induce temperature to participants.Also,to isolate the surround-ings and show colors,a Virtual Reality(VR)glass was employed.The statistical results conducted are based on the response of participants with questionnaire method.Using Chi-square tests,it is concluded that participants answer the experiment significantly correctly using the Leitner technique(P value＜0.05).Also,by applying the"Repeated Measures ANOVA",it is noticed that the time of numbness felt by participants had significant(P value＜0.001)difference.Participants could remember lowest and highest temperatures significantly better than other temperatures(P value＜0.001);furthermore,the well-trained amputee participant practically using the prosthesis with 72.58％could identify object's temperature with only once time experimenting the color temperature.