Hydrogel-perfluorocarbon composite scaffold promotes oxygen transport to immobilized cells

Cell encapsulation provides cells a three-dimensional structure to mimic physiological conditions and improve cell signaling, proliferation, and tissue organization as compared to monolayer culture. Encapsulation devices often encounter poor mass transport, especially for oxygen, where critical dissolved levels must be met to ensure both cell survival and functionality. To enhance oxygen transport, we utilized perfluorocarbon (PFC) oxygen vectors, specifically perfluorooctyl bromide (PFOB) immobilized in an alginate matrix. Metabolic activity of HepG2 liver cells encapsulated in 1% alginate/10% PFOB composite system was 47-104% higher than alginate systems lacking PFOB. A cubic model was developed to understand the oxygen transport mechanism in the alginate/PFOB composite system. The theoretical flux enhancement in alginate systems containing 10% PFOB was 18% higher than in alginate-only systems. Oxygen uptake rates (OURs) of HepG2 cells were enhanced with 10% PFOB addition under both 20% and 5% O2 boundary conditions, by 8% and 15%, respectively. Model predictions were qualitatively and quantitatively verified with direct experimental OUR measurements using both a perfusion reactor and oxygen sensing plate, demonstrating a greater OUR enhancement under physiological O2 boundary conditions (i.e., 5% O2). Inclusion of PFCs in an encapsulation matrix is a useful strategy for overcoming oxygen limitations and ensuring cell viability and functionality both for large devices (>1 mm) and over extended time periods. Although our results specifically indicate positive enhancements in metabolic activity using the model HepG2 liver system encapsulated in alginate, PFCs could be useful for improving/stabilizing oxygen supply in a wide range of cell types and hydrogels.     

Novel homozygous mutations in the WNT10B gene underlying autosomal recessive split hand/foot malformation in three consanguineous families

Split-hand/split-foot malformation (SHFM), representing variable degree of median clefts of hands and feet, is a genetically heterogeneous group of limb malformations with seven loci mapped on different human chromosomes. However, only 3 genes (TP63, WNT10B, DLX5) for the seven loci have been identified.     

Impact of Hydroxylation and Hydration on the Reactivity of α‐Fe2O3 (0001) and (102) Surfaces under Environmental and Electrochemical Conditions

Hematite (α‐Fe₂O₃) is widely used as a catalytic electrode material in photo‐electrochemical water oxidation, where its surface compositions and stabilities can strongly impact the redox reaction process. Here, its surface configurations in environmental or electrochemical conditions are assessed via density functional theory (DFT) calculations conducted at the Perdew, Burke, and Ernzerhof (PBE)+U level. The most energetically favorable surface domains of α‐Fe₂O₃ (0001) and (102) are predicted by constructing the surface phase diagrams in the framework of first‐principle thermodynamics. The relative surface stabilities are investigated as a function of partial pressures of oxygen and water, temperature, solution pH, and electrode potential not only for perfect bulk terminations but also for defect‐containing surfaces having various degrees of hydroxylation and hydration. In order to assess the impact on the redox reactions of the surface planes as well as of the extent of surface hydration/hydroxylation, the thermodynamics of the four‐step oxygen evolution reaction (OER) mechanism are examined in detail for different models of the α‐Fe₂O₃ (0001) and (102) surfaces. Importantly, the results underline that the nature of the surface termination and the degree of near‐surface hydroxylation give rise to significant variations in the OER overpotentials.     

Genetic basis of plant height and its degree of indetermination in mungbean (Vigna radiata (L.) Wilczek)

The genetic basis of plant height at various growth stages and the degree of indetermination of plant height in six mungbean genotypes (NM 92, 6601, NM 89, VC 1560D and VC 3902A) were assessed through half diallel cross. Cultivars, 6601 and NM 92, were the best general combiner for pre-flowering dry matter accumulation and minimum increase in plant height from first flower to 90% pods maturity, respectively. For these traits, the combination NM 92 x NM 89 was the best specific combiner of all the crosses. Both additive and dominant gene effects controlled the inheritance of plant height at first pod and to 90% pods maturity, degree of indetermination of plant height (DDh) from first flower to first pod maturity (DDh1), DDh from first flower to 90% pods maturity (DDh2) and DDh from first pod maturity to 90% pods maturity (DDh3). Plant height at first flower was additively inherited. The additive gene action was predominant as compared to dominant gene action for all the traits examined. High narrow and broad sense heritability estimates for DDh2 showed that better response to selection is possible for the development of mungbean genotypes with minimum increase in plant height during post-flowering development.     

Degradation of polyester polyurethane by a newly isolated soil bacterium, Bacillus subtilis strain MZA-75

A polyurethane (PU) degrading bacterial strain MZA-75 was isolated from soil through enrichment technique. The bacterium was identified through 16S rRNA gene sequencing, the phylogenetic analysis indicated the strain MZA-75 belonged to genus Bacillus having maximum similarity with Bacillus subtilis strain JBE0016. The degradation of PU films by strain MZA-75 in mineral salt medium (MSM) was analyzed by scanning electron microscopy (SEM), fourier transform infra-red spectroscopy (FT-IR) and gel permeation chromatography (GPC). SEM revealed the appearance of widespread cracks on the surface. FTIR spectrum showed decrease in ester functional group. Increase in polydispersity index was observed in GPC, which indicates chain scission as a result of microbial treatment. CO₂ evolution and cell growth increased when PU was used as carbon source in MSM in Sturm test. Increase in both cell associated and extracellular esterases was observed in the presence of PU indicated by p-Nitrophenyl acetate (pNPA) hydrolysis assay. Analysis of cell free supernatant by gas chromatography–mass spectrometry (GC–MS) revealed that 1,4-butanediol and adipic acid monomers were produced. Bacillus subtilis strain MZA-75 can degrade the soft segment of polyester polyurethane, unfortunately no information about the fate of hard segment could be obtained. Growth of strain MZA-75 in the presence of these metabolites indicated mineralization of ester hydrolysis products into CO₂ and H₂O.     

Mutations in KARS,Encoding Lysyl-tRNA Synthetase,Cause Autosomal-Recessive Nonsyndromic Hearing Impairment DFNB89

Previously, DFNB89, a locus associated with autosomal-recessive nonsyndromic hearing impairment (ARNSHI), was mapped to chromosomal region 16q21–q23.2 in three unrelated, consanguineous Pakistani families. Through whole-exome sequencing of a hearing-impaired individual from each family, missense mutations were identified at highly conserved residues of lysyl-tRNA synthetase (KARS): the c.1129G>A (p.Asp377Asn) variant was found in one family, and the c.517T>C (p.Tyr173His) variant was found in the other two families. Both variants were predicted to be damaging by multiple bioinformatics tools. The two variants both segregated with the nonsyndromic-hearing-impairment phenotype within the three families, and neither mutation was identified in ethnically matched controls or within variant databases. Individuals homozygous for KARS mutations had symmetric, severe hearing impairment across all frequencies but did not show evidence of auditory or limb neuropathy. It has been demonstrated that KARS is expressed in hair cells of zebrafish, chickens, and mice. Moreover, KARS has strong localization to the spiral ligament region of the cochlea, as well as to Deiters’ cells, the sulcus epithelium, the basilar membrane, and the surface of the spiral limbus. It is hypothesized that KARS variants affect aminoacylation in inner-ear cells by interfering with binding activity to tRNA or p38 and with tetramer formation. The identification of rare KARS variants in ARNSHI-affected families defines a gene that is associated with ARNSHI.     

Impact of the factors shaping gut microbiota on obesity

Obesity is considered as a risk factor for chronic health diseases such as heart diseases, cancer and diabetes 2. Reduced physical activities, lifestyle, poor nutritional diet and genetics are among the risk factors associated with the development of obesity. In recent years, several studies have explored the link between the gut microbiome and the progression of diseases including obesity, with the shift in microbiome abundance and composition being the main focus. The alteration of gut microbiome composition affects both nutrients metabolism and specific gene expressions, thereby disturbing body physiology. Specifically, the abundance of fibre-metabolizing microbes is associated with weight loss and that of protein and fat-metabolizing bacteria with weight gain. Various internal and external factors such as genetics, maternal obesity, mode of delivery, breastfeeding, nutrition, antibiotic use and the chemical compounds present in the environment are known to interfere with the richness of the gut microbiota (GM), thus influencing weight gain/loss and ultimately the development of obesity. However, the effectiveness of each factor in potentiating the shift in microbes’ abundance to result in significant changes that can lead to obesity is not yet clear. In this review, we will highlight the factors involved in shaping GM, their influence on obesity and possible interventions. Understanding the influence of these factors on the diversity of the GM and how to improve their effectiveness on disease conditions could be keys in the treatment of metabolic diseases.     

Spectral Filters and Temperature Effects on the Growth and Development of Chrysanthemums under Low Light Integral

The influence of altered light quality on the growth and development of chrysanthemum (cvs. Snowdon and Bright Golden Ann), was investigated in three different glasshouse temperatures i.e. 15, 20 or 24°C under low light levels. Five different colour filters i.e. blue and red absorbing (088), Blue absorbing (101), two partially blue absorbing (109 and 110) and Red absorbing (117) were tested, with clear polythene as a control. As in high light conditions, filters as well as temperature under low light levels significantly affected different growth parameters. Filters and temperatures significantly affected plant height and internode length, indicating that in chrysanthemum these were regulated by the action of phytochrome as well as a blue acting photoreceptor (cryptochrome). Time to flowering was affected by a combined action of phytochrome and cryptochrome since filters with blue transmission and high phytochrome photoequilibrium resulted in early flowering. The data were subjected to multiple regression and simple models were constructed to predict the influence of spectral quality on plant height, internode length and time to flowering in chrysanthemum. The models were then applied to simulate the potential benefits spectral filters used for green house cladding and regulation of plant growth under them.     

Overview of bacterial cellulose composites: A multipurpose advanced material

Bacterial cellulose (BC) has received substantial interest owing to its unique structural features and impressive physico-mechanical properties. BC has a variety of applications in biomedical fields, including use as biomaterial for artificial skin, artificial blood vessels, vascular grafts, scaffolds for tissue engineering, and wound dressing. However, pristine BC lacks certain properties, which limits its applications in various fields; therefore, synthesis of BC composites has been conducted to address these limitations. A variety of BC composite synthetic strategies have been developed based on the nature and relevant applications of the combined materials. BC composites are primarily synthesized through in situ addition of reinforcement materials to BC synthetic media or the ex situ penetration of such materials into BC microfibrils. Polymer blending and solution mixing are less frequently used synthetic approaches. BC composites have been synthesized using numerous materials ranging from organic polymers to inorganic nanoparticles. In medical fields, these composites are used for tissue regeneration, healing of deep wounds, enzyme immobilization, and synthesis of medical devices that could replace cardiovascular and other connective tissues. Various electrical products, including biosensors, biocatalysts, E-papers, display devices, electrical instruments, and optoelectronic devices, are prepared from BC composites with conductive materials. In this review, we compiled various synthetic approaches for BC composite synthesis, classes of BC composites, and applications of BC composites. This study will increase interest in BC composites and the development of new ideas in this field.