Reversion of malignancy in human gastric cancer MKN—45 cells through the transfection of transforming growth factor—β type Ⅱ receptor gene

Human gastric cancer MKN-45 cells which are resistant to TGF-β growth inhibition and possess TGF-β type I and type Ⅲ receptors,but not type Ⅱ receptors,have been used as a model system to reconstitute these cancer cells with TGF-β RII cDNA.The results of these experiments indicated that the reexpression of TGF-β RII gene in MKN-45 cells can restore their sensitivity to TGF-β growth inhibition,decrease their growth rate,reduce their cloning efficiency in soft agar and tumorigenicity in nude mice in stable transfectants,in comparison with their control MKN-45 cells.Among different RII transfectants,their difference in the changes of these parameters,as a result of the regain of autocrine negative growth control by TGF-β,is roughly proportional to their level of expression of transfected RII mRNA.From these data,it is concluded that the inactivation of TGF-β RII gene is related to the escape of growth control by TGF-β in MKN-45 cells.The importance of the study of the interplay of TGF-β and its receptor system in the negative growth control of gastric cancer,and possibly also of other cancers,is discussed.     

中药金樱子的研究应用概况

本文就国内外对中药金樱子的化学成分及其提取分离方法、药理学研究和临麻应用作了综述,为金樱子的综合开发提供依据。     

固定化酵母细胞生产1,6-二磷酸果糖研究

本文研究了固定化酵母细胞制备果糖1,6二磷酸(FDP)的方法及其生产。用卡拉胶包埋方法固定化酿酒酵母(Sacchromyces cerevisae),对含葡萄糖1.0M,磷酸盐0.8M的糖磷液,pH6.5,在37℃下进行磷酸化反应。反复分批转化20天以上,可达到平均产FDPH_427.58mg/ml,最高为59.94mg/ml。用100ml固定化细胞生物反应器连续运转309h,稀释速率D=0.097h~(-1),平均产FDPH_4 21.51mg/ml。20L反应器连续运转,生产能力达到1.7g/h.L。用层析方法制备FDPNa_3结晶粉,提取收率为72.08％,制备质量达到或超过了国内外同类产品的质量要求。     

应用离体叶片法鉴定棉花种质抗螨性的研究

应用离体叶片法,对9个棉花种质进行了鉴定,试验结果表明;种质间抗生性和忌避性差异显著;同株棉花不同部位的叶片对朱砂叶螨的抗生性无显著性差异。通过对叶螨在不同棉花种质上种群增长动态进行系统聚类,可将9个棉花种质划分为3类:斯字棉825-91、杞县86789、鄂棉314、苏联8911为1类,中棉164、潼南接龙棉、新库861517-2、南农NAC90-2为1类,美棉7-15独立为1类。依据朱砂叶螨在不同种质上的种群增长曲线和高峰期螨量增长倍数,可将9个种质划分为3个类型;斯字棉825-91、新库861517-2为抗性类型,潼南接龙棉、美棉7-15、南农NAC90-2为感性类型,其余为中抗类型。从忌避性看:斯字棉825-91、美棉7-15表现出较高的忌避性。     

广州抽水蓄能电站蓄水库蓄水初期浮游生物调查

对我国首座核电站配套工程的抽水蓄能电站水库蓄水初期的浮游生物进行了调查。蓄水水库由上下两水库组成。两水库的浮游生物种类组成显著不同。上水库浮游植物共记录到３０种（属）,浮游动物１２种（属）;下水库浮游植物１９种（属）;浮游动物２５种（属）。上下两水库浮游生物数量均较贫乏,表明浮游生物群落尚处于初期发育阶段,但在局部浅水处已出现小规模的蓝藻水花,认为是水库蓄水初期必然的结果     

Inherited non-autosomal effects on body fat in F2 mice derived from an AKR/J × SWR/J cross

In this study we describe the contribution of matrilineal and patrilineal effects on the adiposity, body weight, and on the weights of individual fat pads in F₂ male mice derived from an SWR/J × AKR/J cross. AKR/J mice become obese after 12 weeks on a high-fat diet, whereas SWR/J mice remain relatively lean. Here we report that mice with AKR maternal and AKR paternal grandmothers have significantly larger epidydimal and retroperitoneal fat pads than those with SWR maternal and paternal grandmothers. However, grandparental strain had no effect on the overall adiposity (AI) or the weights of the inguinal, subcutaneous or mesenteric fat pads. The strain of the paternal grandparents had a small but significant effect on body weight. These effects can be attributed to in utero effects, imprinting effects, cytoplasmic and/or Y chromosome transmission of factors controlling body fat. We also describe the presence of a quantitative trait locus (QTL) on Chromosome X, close to DXMit174, which is linked to adiposity, body weight, and to the weights of the individual fat depots. However, this QTL is not responsible for the grandparental strain effects described above. Received: 3 March 1997 / Accepted: 5 May 1997     

载脂蛋白AⅡ保护内皮细胞的实验研究

以细胞形态观察、细胞存活率、乳酸脱氢酶释放和前列环素测定等方面研究载脂蛋白AⅡ保护内皮细胞的作用.结果显示,载脂蛋白AⅡ可部分拮抗低密度脂蛋白对内皮细胞的损伤作用, 维持内皮细胞形态基本正常,乳酸脱氢酶释放减少,前列环素合成增加.     

一类新内含子的研究状况

在真核细胞基因组中发现一类新内含子——AT-AC内含子, 除结构特征与普遍存在的核mRNA前体内含子有明显不同外,剪接机制上也存在一定差异.文章介绍了该内含子的分布,结构特征及剪接机理,并与主内含子作了相应比较.     

促黄体素释放激素类似物(LH-RH-A)对人蜕膜组织核糖核酸和蛋白质合成的抑制作用

高剂量LH-RH-A可明显抑制人蜕膜组织在离体下对~3H-尿嘧啶和~3H-亮氨酸的摄取;低剂量LH-RH-A无明显影响。在人蜕膜组织中也发现有高亲合力(K_?=3.83±1.36×10~?M~(-1))的LH-RH-A特异受体。上述发现表明,高剂量LH-RH-A可通过直接抑制RNA和蛋白质的合成而调节蜕膜组织的功能。     

光刺激参数控制器

本文介绍一种能准确而迅速改变光刺激器光学参数(波长、强度等)的远距控制装置。将具有不同光学参数的滤光片(或孔径)置于转盘的不同位置,并对其编码。通过对编码值与预置值的比较,驱动步进马达带动转盘到所需的位置。仪器操作简便,有良好的重复性。