Lipoprotein nature of the colicin A lysis protein: effect of amino acid substitutions at the site of modification and processing.

The colicin A lysis protein (Cal) is required for the release of colicin A to the medium by producing bacteria. This protein is produced in a precursor form that contains a cysteine at the cleavage site (-Leu-Ala-Ala-Cys). The precursor must be modified by the addition of lipid before it can be processed. The maturation is prevented by globomycin, an inhibitor of signal peptidase II. Using oligonucleotide-directed mutagenesis, the alanine and cystein residues in the -1 and +1 positions of the cleavage site were replaced by proline and threonine residues, respectively, in two different constructs. Both substitutions prevented the normal modification and cleavage of the protein. The marked activation of the outer membrane detergent-resistant phospholipase A observed with wild-type Cal was not observed with the Cal mutants. Both Cal mutants were also defective for the secretion of colicin A. In one mutant, the signal peptide appeared to be cleaved off by an alternative pathway involving signal peptidase I. Electron microscope studies with immunogold labeling of colicin A on cryosections of pldA and cal mutant cells indicated that the colicin remains in the cytoplasm and is not transferred to the periplasmic space. These results demonstrate that Cal must be modified and processed to activate the detergent-resistant phospholipase A and to promote release of colicin A.     

Relationship of an unstable argG gene to a 5.7-kilobase amplifiable DNA sequence in Streptomyces lividans 66.

The relationship between an unstable argG gene and a 5.7-kilobase (kb) amplifiable DNA sequence in Streptomyces lividans 66 was investigated. Spontaneous, high-frequency Arg mutants deleted for this gene typically contain 200 to 300 copies of the tandemly reiterated sequence. A library of S. lividans 66 (strain 1326) wild-type genomic DNA was prepared in the vector lambda Charon 35. Chromosome walking over 44 kb established that argG is located 25 kb distant from a duplicated amplifiable DNA structure. A sequence was characterized, located farther distal from the amplifiable structure, containing strong homology with an internal sequence of the amplifiable DNA, which may have a role in the deletion of argG. Genetic mapping showed that argG and the 5.7-kb amplifiable sequence are linked to another unstable gene, determining chloramphenicol resistance (Camr) and that together these genes may be located in a silent chromosomal arc.     

Beta-glucoside (bgl) operon of Escherichia coli K-12: nucleotide sequence, genetic organization, and possible evolutionary relationship to regulatory components of two Bacillus subtilis genes.

Wild-type Escherichia coli cells are unable to grow on beta-glucosides. Spontaneous mutants arise, however, which are able to utilize certain aromatic beta-glucosides such as salicin or arbutin as carbon sources, revealing the presence of a cryptic operon called bgl. Mutations activating the operon map within (or close to) the promoter region of the operon and are due to the transposition of an IS1 or IS5 insertion element into this region. This operon was reported to consist of three genes coding for a phospho-beta-glucosidase, a specific transport protein (enzyme IIBgl), and a positively regulating protein. We have defined the extent and location of three structural genes, bglC, bglS, and bglB, and have determined their DNA sequence. The amino acid sequences deduced from the open reading frames together with deletion and subcloning analyses suggest that the first gene, bglC, codes for the regulatory protein, the second, bglS, codes for the transport protein, and the third, bglB, for phospho-beta-glucosidase. A fourth gene may exist which codes for a product of unknown function. We discuss structural features of the DNA sequence which may bear on the regulation of the operon. Homologies to sequences preceding the gene for an excreted levansucrase of Bacillus subtilis, which are known to be involved in the regulation of this gene, and to sequences preceding the gene for an excreted beta-endoglucanase of B. subtilis, for which data pertaining to regulation are not yet available, suggest a close evolutionary relationship among the regulatory components of all three systems.     

Carbon monoxide-driven electron transport in Clostridium thermoautotrophicum membranes.

Membrane vesicles of Clostridium thermoautotrophicum prepared by osmotic lysis after lysozyme treatment contained carbon monoxide dehydrogenase and methylenetetrahydrofolate dehydrogenase with specific activities three- to fourfold higher than the specific activity of the cytoplasm. The membrane-associated carbon monoxide dehydrogenase mediated the reduction with CO or the oxidation with CO2 of b-type cytochromes and other electron carriers in the membrane.     

Transfer functions of the Streptococcus faecalis plasmid pAD1: organization of plasmid DNA encoding response to sex pheromone.

The conjugative plasmid pAD1 (59.6 kilobases) of Streptococcus faecalis shows a 10,000-fold increase in transfer frequency following induction by the sex pheromone cAD1. Mutagenesis of the plasmid with transposon Tn917 was undertaken to determine the region(s) of pAD1 required for the mating response. The relevant genetic material was found to be distributed over a 31.2-kilobase contiguous region of the plasmid. Although insertions in two previously identified regions (traA and traB) exhibited increased transfer frequencies, insertions in five new regions (D, E, F, G, and H) decreased the ability of pAD1 to transfer. Insertions in region H allowed the cells to form visible mating aggregates, but the plasmid transfer frequency was decreased to levels below detection during a 1-h broth mating. Mutants with mutations in region G were able to form aggregates; however, insertions in regions D, E, and F prevented aggregate formation. Insertions in region C decreased the sensitivity of the cell to exogenous cAD1 and exhibited increased activity of the pheromone inhibitor iAD1. Surface protein profiles produced by a number of these mutants were examined, and in some cases were found to be different from those of the wild type. A map showing the various regions is presented, and related aspects of the regulation of the pAD1 mating response are discussed.     

Contraction of filaments of Escherichia coli after disruption of cell membrane by detergent.

The osmotic pressure within a living bacterium creates stresses in the peptidoglycan that stretch the sacculus. We measured the amount of stretch by monitoring the shrinkage of growing cells of Escherichia coli after removal of the osmotic pressure by disruption of the phospholipid membranes with sodium dodecyl sulfate. Because the rods of the wild type are so short, length changes of filaments of longer than 7 microns were measured on phase-contrast micrographs. The filaments were prepared by growing ftsA and ftsI strains under permissive conditions in rich medium and then shifting them to 42 degrees C for 40 to 180 min. During this time, the mutant cells became elongated but did not divide. The growing filaments were mounted on a glass surface that had been treated with poly-L-lysine or RNase. The filaments were photographed before being treated with sodium dodecyl sulfate. The filaments were rephotographed at the time when the first change in phase contrast was noted. Some filaments were also measured at 10-min time intervals from 0 to 60 min. The reduction in phase contrast signaled the leakage of solutes and the loss of turgor pressure. The average length of the filaments decreased 17%. If the circumference were stretched to the same degree, then the surface area in vivo would be 45% greater than in the relaxed state. For comparison, a fully cross-linked monolayer of E. coli peptidoglycan in its most compact conformation could stretch up to 300% in achieving the most extended conformation possible without splitting covalent bonds.     

Identification of flagellar hook and basal body gene products (FlaFV, FlaFVI, FlaFVII and FlaFVIII) in Salmonella typhimurium.

The flagellar genes flaFV, flaFVII, and flaFVIII of Salmonella typhimurium were cloned, and their presence on a given plasmid was verified by complementation of Escherichia coli mutants defective in the homologous genes. The gene products were identified by radiolabeling in a minicell system as being proteins of the following molecular masses: FlaFV, 42 kilodaltons (kDa); FlaFVI, 32 kDa; FlaFVII, 30 kDA; and FlaFVIII, 27 kDa. These data, together with isoelectric focusing data, confirm gene product assignments of flagellar components made indirectly from mutant studies. Flagellar components are transported by either a signal peptide-dependent or a flagellar-specific pathway. Consistent with its location in the outer membrane ring of the basal body, protein FlaFVIII seems to use the signal peptide-dependent pathway, since it was synthesized in a precursor form and processed, presumably by peptide cleavage, to a mature form; the maturation process was inhibited by addition of a proton ionophore. Proteins synthesized in minicells were localized as follows: FlaFVI was localized to the soluble fraction (cytoplasm); pre-FlaFVIII and FlaFVIII were localized to the particulate fraction (membrane or high-molecular-weight aggregate); FlaFV and FlaFVII were localized to both fractions. The significance of these locations in terms of known or suspected roles in the flagellar apparatus is discussed.     

LiCl treatment releases a nickase implicated in genetic transformation of Streptococcus pneumoniae.

When cells competent for genetic transformation of Streptococcus pneumoniae which could bind and enable entry of extracellular DNA molecules were treated with LiCl, they released a nickase that introduced nicks into a double-stranded DNA in the presence of EDTA. The nickase was specific for competent cells and coupled with DNA-binding activity. Furthermore, when noncompetent cells were treated with LiCl, they released the putative receptors for the competence activator.     

Cloning and nucleotide sequence of the penicillinase antirepressor gene penJ of Bacillus licheniformis.

The penicillinase antirepressor gene, penJ, of Bacillus licheniformis ATCC 9945a was cloned in Escherichia coli by using pMB9 as a vector plasmid. The penicillinase gene, penP, its repressor gene, penI, and penJ were encoded on the cloned 5.2-kilobase HindIII fragment of the recombinant plasmid pTTE71. The penJ open reading frame was composed of 1,803 bases and 601 amino acid residues (molecular weight, 68,388). A Shine-Dalgarno sequence was found 7 bases upstream from the translation start site. Since this sequence was located in the 3'-terminal region of the penI gene, penJ might be transcribed together with penI as a polycistronic mRNA from the penI promoter. Frameshift mutations of penJ were constructed in vitro from pTTE71, and the penJ mutant gene was introduced into B. licheniformis by chromosomal recombination. The transformant B. licheniformis U173 (penP+ penI+ penJ) turned out to be uninducible for penicillinase production, whereas the wild-type strain (penP+ penI+ penJ+) was inducible. Only when these three genes (penP, penI, and PenJ) were simultaneously subcloned in Bacillus subtilis did the plasmid carrier exhibit inducible penicillinase production, as did wild-type B. licheniformis. It was concluded that penJ is involved in the penicillinase induction. The regulation of penP expression by penI and penJ is discussed.