Toxicity of three acaricides to Tetranychus urticae (Tetranychidae: Acari) and Orius insidiosus (Anthocoridae: Hemiptera)

Management for twospotted spider mite, Tetranychus urticae Koch, populations in peanut, Arachis hypogaea L., relies on acaricides. The outcomes of acaricide applications are most predictable when complete information on their toxicity and specificity is available. Specifically, the degrees to which acaricides impact different stages of T. urticae and natural enemies combined determine the overall efficacy of an acaricide application. The objectives of this study were to determine stage-specific direct and residual efficacies of three acaricides (fenpropathrin, etoxazole, and propargite) against T. urticae, and the direct and residual toxicity of the acaricides to Orius insidiosus (Say) adults. Direct toxicity of acaricides to T. urticae was measured on peanut cuttings. All acaricide treatments caused significant mortality to a mixed stage population of T. urticae, and mortality did not differ among the acaricides 7 d after treatment. When toxicity to eggs was tested, the proportion of eggs that hatched for all acaricide treatments was significantly lower than the control, with etoxazole and propargite causing 100% mortality. Exposure to acaricide residues caused < 30% mortality of T. urticae adults 1 and 2 d after treatment and was not significantly different from the control. Fenpropathrin and propargite caused 100% mortality and etoxazole caused > 50% mortality of O. insidious adults after direct exposure to the acaricides. Residual toxicity of acaricides to O. insidiosus adults varied but remained toxic to O. insidiosus longer than to T. urticae. Fenpropathrin had the longest residual effect on O. insidiosus adults, causing > 95% mortality after 14 d; etoxazole and propargite caused < 30% mortality after 14 d.     

Influence of aerial dispersal on persistence and spread of pesticide-resistant Metaseiulus occidentalis in California almond orchards

Aerial dispersal of the phytoseiid Metaseiulus occidentalis (Nesbitt) was evaluated as a component in managing pesticide-resistant populations established in California almond orchards. Peak dispersal occurred in late July and early August during 1982 and 1983. Most predators (and spider mites) left the orchards on the prevailing winds from the northwest. Within the orchard, the prevailing winds had less influence, and dispersal was usually random. Both spider mites and predators dispersed randomly with regard to height from the almond trees, but data obtained during one 24-h interval suggest they do not disperse randomly throughout the day. Most aerial movements occurred between 16–22 h when relative humidity and wind speeds increased and temperatures decreased. Spider mites and predators were trapped on panels located 200 m from the orchard. A survey of carbaryl resistance levels in M. occidentalis collected from almond orchards surrounding the release sites indicates that carbaryl-resistant M. occidentalis dispersed at least 800 m between 1981–83. However, growers wishing to use the resistant strains should release them in their orchards as natural dispersal appears to be too slow. Migration of native M. occidentalis into the release sites appeared to be sufficiently rare that dilution of carbaryl-resistant populations was minimal during a 2–4 year period.

---

Résumé La dispersion aérienne du phytoseïdae, M. occidentalis (Nesbitt), a été estimée comme élément de la lutte contre les populations résistantes aux insecticides établies dans les vergers de Californie. La dispersion maximale s'est produite fin juillet et début a oût en 1982 et 1983. La plupart des prédateurs (et des acariens) quittent les vergers avec les vents dominants du nordouest. Dans le verger, les vents dominants sont moins importants et la dispersion est généralement au hasard. Tant les acariens que les prédateurs se dispersaient au hasard par rapport à la taille des amandiers, mais les relevés sur 24 heures laissent supposer qu'il n'y a pas une distribution aléatoire pendant la journée. La plupart des mouvements aériens se produisirent entre 16 et 22 heures quand HR et vitesse du vent augmentaient et température diminuait. Les acariens et prédateurs ont été piégés sur des panneaux à 200 m du verger.

     

Fluorescent ligands for the histamine H2 receptor: synthesis and preliminary characterization

3-[3-(Piperidinomethyl)phenoxy]alkyl, N-cyano-N′-[ω-[3-(1-piperidinylmethyl)phenoxy]alkyl]guanidine and 2-(5-methyl-4-imidazolyl)methyl thioethyl derivatives containing fluorescent functionalities were synthesized and the histamine H₂ receptor affinity was evaluated using the H₂ antagonist [¹²⁵I]-aminopotentidine. The compounds exhibited weak to potent H₂ receptor affinity with pK_i values ranging from <4 to 8.85. The highest H₂ receptor affinity was observed for N-cyano-N′-[ω-[3-(1-piperidinylmethyl)phenoxy]alkyl]guanidines substituted with methylanthranilate (13), cyanoindolizine (6) and cyanoisoindole (11) moieties via an ethyl or propyl linker.     

An Investigation of Freezing of Supercooled Water on Anti-Freeze Protein Modified Surfaces

This work investigates how functionalization of aluminium surfaces with natural type III Anti-Freeze Protein (AFP) affects the mechanism of heterogeneous ice nucleation. First the bulk ice nucleation properties of distilled water and aqueous solution of AFP were evaluated by differential scanning calorimetry. Then the modified surface was characterized by Secondary Ions Mass Spectroscopy (SIMS), Fourier Transform InfraRed (FTIR) spectroscopy and contact angle measurement. Freezing experiments were then conducted in which water droplets underwent a slow controlled cooling. This study shows that compared to uncoated aluminium, the anti-freeze proteins functionalized surfaces exhibit a higher and narrower range of freezing temperature. It was found that these proteins that keep living organisms from freezing in cold environment act in the opposite way once immobilized on surfaces by promoting ice nucleation. Some suggestions regarding the mechanism of action of the observed phenomena were proposed based on the Classical Nucleation Theory (CNT).     

Are Ants Useful Indicators of Restoration Success in Temperate Grasslands?

Assessments of restoration are usually made through vegetation community surveys, leaving much of the ecosystem underexamined. Invertebrates, and ants in particular, are good candidates for restoration evaluation because they are sensitive to environmental change and are particularly important in ecosystem functioning. The considerable resources currently employed in restoring calcareous grassland on ex‐arable land mean that it is important to gather as much information as possible on how ecosystems change through restoration. We compared ant communities from 40 ex‐arable sites where some form of restoration work had been implemented between 2 and 60 years previously, with 40 paired reference sites of good quality calcareous grassland with no history of improvement or cultivation. A total of 11 ant species were found, but only two of these were found to be significantly different in abundance between restoration and reference sites: Myrmica sabuleti was more likely to be present in reference sites, whereas Lasius niger was more likely to be found in restoration sites. Myrmica sabuleti abundance was significantly positively correlated with age of restoration sites. The potential number of ant species found in temperate grasslands is small, limiting the information their assemblages can provide about ecosystem change. However, M. sabuleti is a good indicator species for calcareous grassland restoration success and, alongside information from the plant community, could increase the confidence with which restoration success is judged. We found the survey to be quick and simple to carry out and recommend its use.     

RNA–protein binding kinetics in an automated microfluidic reactor

Microfluidic chips can automate biochemical assays on the nanoliter scale, which is of considerable utility for RNA–protein binding reactions that would otherwise require large quantities of proteins. Unfortunately, complex reactions involving multiple reactants cannot be prepared in current microfluidic mixer designs, nor is investigation of long-time scale reactions possible. Here, a microfluidic ‘Riboreactor’ has been designed and constructed to facilitate the study of kinetics of RNA–protein complex formation over long time scales. With computer automation, the reactor can prepare binding reactions from any combination of eight reagents, and is optimized to monitor long reaction times. By integrating a two-photon microscope into the microfluidic platform, 5-nl reactions can be observed for longer than 1000 s with single-molecule sensitivity and negligible photobleaching. Using the Riboreactor, RNA–protein binding reactions with a fragment of the bacterial 30S ribosome were prepared in a fully automated fashion and binding rates were consistent with rates obtained from conventional assays. The microfluidic chip successfully combines automation, low sample consumption, ultra-sensitive fluorescence detection and a high degree of reproducibility. The chip should be able to probe complex reaction networks describing the assembly of large multicomponent RNPs such as the ribosome.     

Dynamic shear stress in parallel-plate flow chambers

An in vitro model using a parallel-plate fluid flow chamber is supposed to simulate in vivo fluid shear stresses on various cell types exposed to dynamic fluid flow in their physiological environment. The metabolic response of cells in vitro is associated with the wall shear stress. However, parallel-plate flow chambers have not been characterized for dynamic fluid flow experiments. We use a dimensionless ratio h / lambda(v), in determining the exact magnitude of the dynamic wall shear stress, with its oscillating components scaled by a shear factor T. It is shown that, in order to expose cells to predictable levels of dynamic fluid shear stress, two conditions have to be met: (1) h / lambda(v) < 2, where h is the distance between the plates and lambda(v) is the viscous penetration depth; and (2) f(0) < f(c) / m, where the critical frequency f(c) is the upper threshold for this flow regime, m is the highest harmonic mode of the flow, and f(0) is the fundamental frequency of fluid flow.