Validity and Reliability of A-Mode Ultrasound for Body Composition Assessment of NCAA Division I Athletes

This study evaluated the validity and reliability of the BodyMetrix™ BX2000 A-mode ultrasound for estimating percent body fat (%BF) in athletes by comparing it to skinfolds and the BOD POD. Forty-five (22 males, 23 females) National Collegiate Athletic Association (NCAA) Division-I athletes volunteered for this study. Subjects were measured once in the BOD POD then twice by two technicians for skinfolds and ultrasound. A one-way repeated-measures ANOVA revealed significant differences between body composition methods (F = 13.24, p < 0.01, η² = 0.24). This difference was further explained by a sex-specific effect such that the mean difference between ultrasound and BOD POD was large for females (~ 5% BF) but small for males (~ 1.5% BF). Linear regression using the %BF estimate from ultrasound to predict %BF from BOD POD resulted in an R² = 0.849, SEE = 2.6% BF and a TE = 4.4% BF. The inter-rater intraclass correlation (ICC) for skinfold was 0.966 with a large 95% confidence interval (CI) of 0.328 to 0.991. The inter-rater ICC for ultrasound was 0.987 with a much smaller 95% CI of 0.976 to 0.993. Both skinfolds and ultrasound had test-retest ICCs ≥ 0.996. The BX2000 ultrasound device had excellent test-retest reliability, and its inter-rater reliability was superior to the skinfold method. The validity of this method is questionable, particularly for female athletes. However, due to its excellent reliability, coaches and trainers should consider this portable and easy to use A-mode ultrasound to assess body composition changes in athletes.     

A conserved Pol? binding module in Ctf18-RFC is required for S-phase checkpoint activation downstream of Mec1

Defects during chromosome replication in eukaryotes activate a signaling pathway called the S-phase checkpoint, which produces a multifaceted response that preserves genome integrity at stalled DNA replication forks. Work with budding yeast showed that the ‘alternative clamp loader’ known as Ctf18-RFC acts by an unknown mechanism to activate the checkpoint kinase Rad53, which then mediates much of the checkpoint response. Here we show that budding yeast Ctf18-RFC associates with DNA polymerase epsilon, via an evolutionarily conserved ‘Pol ϵ binding module’ in Ctf18-RFC that is produced by interaction of the carboxyl terminus of Ctf18 with the Ctf8 and Dcc1 subunits. Mutations at the end of Ctf18 disrupt the integrity of the Pol ϵ binding module and block the S-phase checkpoint pathway, downstream of the Mec1 kinase that is the budding yeast orthologue of mammalian ATR. Similar defects in checkpoint activation are produced by mutations that displace Pol ϵ from the replisome. These findings indicate that the association of Ctf18-RFC with Pol ϵ at defective replication forks is a key step in activation of the S-phase checkpoint.     

Identification of proteins induced by polycyclic aromatic hydrocarbon in Mycobacterium vanbaalenii PYR-1 using two-dimensional polyacrylamide gel electrophoresis and de novo sequencing methods

Protein profiles of Mycobacterium vanbaalenii PYR-1 grown in the presence of high-molecular-weight polycyclic aromatic hydrocarbons (HMW PAHs) were examined by two-dimensional gel electrophoresis (2-DE). Cultures of M. vanbaalenii PYR-1 were incubated with pyrene, pyrene-4,5-quinone (PQ), phenanthrene, anthracene, and fluoranthene. Soluble cellular protein fractions were analyzed and compared, using immobilized pH gradient (IPG) strips. More than 1000 gel-separated proteins were detected using a 2-DE analysis program within the window of isoelectric point (pI) 4-7 and a molecular mass range of 10-100 kDa. We observed variations in the protein composition showing the upregulation of multiple proteins for the five PAH treatments compared with the uninduced control sample. By N-terminal sequencing or mass spectrometry, we further analyzed the proteins separated by 2-DE. Due to the lack of genome sequence information for this species, protein identification provided an analytical challenge. Several PAH-induced proteins were identified including a catalase-peroxidase, a putative monooxygenase, a dioxygenase small subunit, a small subunit of naphthalene-inducible dioxygenase, and aldehyde dehydrogenase. We also identified proteins related to carbohydrate metabolism (enolase, 6-phosphogluconate dehydrogenase, indole-3-glycerol phosphate synthase, and fumarase), DNA translation (probable elongation factor Tsf), heat shock proteins, and energy production (ATP synthase). Many proteins from M. vanbaalenii PYR-1 showed similarity with protein sequences from M. tuberculosis and M. leprae. Some proteins were detected uniquely upon exposure to a specific PAH whereas others were common to more than one PAH, which indicates that induction triggers not only specific responses but a common response in this strain.     

Stochastic simulation of clonal growth in the tall goldenrod,Solidago altissima

Summary As clonal plants grow they move through space. The movement patterns that result can be complex and difficult to interpret without the aid of models. We developed a stochastic simulation model of clonal growth in the tall goldenrod, Solidago altissima. Our model was calibrated with field data on the clonal expansion of both seedlings and established clones, and model assumptions were verified by statistical analyses.When simulations were based on empirical distributions with long rhizome lengths, there was greater dispersal, less leaf overlap, and less spatial aggregation than when simulations were based on distributions with comparatively short rhizome lengths. For the field data that we utilized, variation in rhizome lengths had a greater effect than variation for either branching angles or rhizome initiation points (see text). We also found that observed patterns of clonal growth in S. altissima did not cause the formation of fairy rings. However, simulations with an artificial distribution of branching angles demonstrate that fairy rings can result solely from a plant's clonal morphology.Stochastic simulation models that incorporated variation in rhizome lengths, branching angles, and rhizome initiation points produced greater dispersal and less leaf overlap than deterministic models. Thus, variation for clonal growth parameters may increase the efficiency of substrate exploration by increasing the area covered and by decreasing the potential for intraclonal competition. We also demonstrated that ramet displacements were slightly, but consistently lower in stochastic simulation models than in random-walk models. This difference was due to the incorporation of details on rhizome bud initiation into stochastic simulation models, but not random-walk models. We discuss the advantages and disadvantages of deterministic, stochastic simulation, and random-walk models of clonal growth.     

Growth inhibition of 3T3 fibroblasts by lysosomotropic amines: correlation with effects on intravesicular pH but not vacuolation

The effects of five lysosomotropic amines on the growth of Swiss 3T3 fibroblasts were measured and compared with effects on intravesicular pH. Tributylamine and benzylamine, amines that affect intravesicular pH without causing vacuolation, were found to inhibit cell growth to a similar extent as vacuologenic amines previously tested. Excellent correlation between the half-maximal concentrations for the growth and pH effects were found for tributylamine, benzylamine, chloroquine, and ammonium chloride. The results suggest that growth inhibition by these amines is a direct result of their effects on pH and not due to other effects (such as vacuolation). In contrast, a 100-fold difference in the half-maximal concentrations was found for methylamine, suggesting that methylamine inhibits growth by a mechanism unrelated to pH.     

The identification of protein-protein interactions of the nuclear pore complex of Saccharomyces cerevisiae using high throughput matrix-assisted laser desorption ionization time-of-flight tandem mass spectrometry

Mass spectrometry has become the technology of choice for detailed identification of proteins in complex mixtures. Although electrophoretic separation, proteolytic digestion, mass spectrometric analysis of unseparated digests, and database searching have become standard methods in widespread use, peptide sequence information obtained by collision-induced dissociation and tandem mass spectrometry is required to establish the most comprehensive and reliable results. Most tandem mass spectrometers in current use employ electrospray ionization. In this work a novel tandem mass spectrometer employing matrix-assisted laser desorption ionization-time-of-flight/time-of-flight operating at 200 Hz has been used to identify proteins interacting with known nucleoporins in the nuclear pore complex of Saccharomyces cerevisiae. Proteins interacting with recombinant proteins as bait were purified from yeast extracts and then separated by one-dimensional SDS-PAGE. Although peptide mass fingerprinting is sometimes sufficient to identify proteins, this study shows the importance of employing tandem mass spectrometry for identifying proteins in mixtures or as covalently modified forms. The rules for incorporating these features into MS-Tag are presented. In addition to providing an evaluation of the sensitivity and overall quality of collision-induced dissociation spectra obtained, standard conditions for ionization and fragmentation have been selected that would allow automatic data collection and analysis, without the need to adjust parameters in a sample-specific fashion. Other considerations essential for successful high throughput protein analysis are discussed.     

Models for gibberellic acid transport and enzyme production and transport in the aleurone layer of barley

Gibberellins are growth hormones produced in the embryo of grain released during germination. They promote growth through the production of enzymes in the aleurone layer surrounding the endosperm. These enzymes then diffuse into the endosperm and produce the sugars required by the growing acrospire. Here we model the transport of gibberellins into and along the aleurone layer, the consequent production of enzymes, and their transport into the endosperm. Simple approximate solutions of the governing equations are obtained which suggest that the enzymes are released immediately behind a gibberellin front which travels with almost constant speed along the aleurone layer. The model also suggests that this propagation speed is determined primarily by conditions near the scutellum-aleurone junction, which may enable the embryo to actively control the germination process.