Tree-ring wood anatomy and stable isotopes show structural and functional adjustments in olive trees under different water availability

Background and Aims

Olive tree (Olea europaea L.) is a drought-tolerant tree species cultivated in Mediterranean-type environments. Although it is tolerant to drought, dry conditions decrease its productivity. A thorough analysis of the hydraulic architecture and wood anatomical plasticity, as well as of their physiological significance, is needed to understand how olive trees will adapt to the predicted increase in frequency and severity of drought in the Mediterranean region.

Methods

Dendrochronological, stable isotopic (δ¹³C, δ¹⁸O) and wood anatomical analyses were applied to understand how different water availability can affect wood stem structure and function, in rainfed and irrigated at 100 % of crop evapotranspiration (ETc) olive trees in an experimental orchard close to Benevento (Italy) from 1992 to 2009.

Results

Dendrochronological data indicate that cross-dating and synchronization of ring-width time series in olive tree is possible. After the start of irrigation, significantly more negative δ¹³C and lower δ¹⁸O values were recorded in irrigated trees indicating higher stomatal conductance and transpiration rates. Increased water balance induced the formation of a higher number of vessels with higher diameter.

Conclusions

Water balance variations affected wood anatomy and isotopic composition. Anatomical analyses detected structural and functional adjustments in rainfed trees that produced more vessels with lower diameter to prevent cavitation. Isotopic analyses confirmed that irrigated trees continuously showed enhanced transpiration rates.     

Blood Metals Concentration in Type 1 and Type 2 Diabetics

Mechanisms for the onset of diabetes and the development of diabetic complications remain under extensive investigations. One of these mechanisms is abnormal homeostasis of metals, as either deficiency or excess of metals, can contribute to certain diabetic outcomes. Therefore, this paper will report the blood levels of chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), mercury (Hg), nickel (Ni), lead (Pb), selenium (Se), and zinc (Zn) in subjects with type 1 diabetes (n?=?192, mean age 48.8 years, mean disease duration 20.6 years), type 2 diabetes (n?=?68, mean age 68.4 years, mean disease duration 10.2 years), and in control subjects (n?=?59, mean age 57.2 years), and discuss the results indicating their possible role in diabetes. The metal concentrations were measured by sector field inductively coupled plasma mass spectrometry after microwave-induced acid digestion of blood samples. The accuracy was checked using a blood-based certified reference material, and recoveries of all elements were in the range of 92–101 % of certified values. Type 1 diabetes was found to be associated with Cr (p?=?0.02), Mn (p?<?0.001), Ni (p?<?0.001), Pb (p?=?0.02), and Zn (p?<?0.001) deficiency, and type 2 diabetes with Cr (p?=?0.014), Mn (p?<?0.001), and Ni (p?<?0.001) deficiency. These deficiencies were appreciated also subdividing the understudied patients for gender and age groups. Furthermore, in type 1 diabetes, there was a positive correlation between Pb and age (p?<?0.001, ρ?=?0.400) and Pb and BMI (p?<?0.001, ρ?=?0.309), while a negative correlation between Fe and age (p?=?0.002, ρ?=??0.218). In type 2 diabetes, there was a negative correlation between Fe and age (p?=?0.017, ρ?=??0.294) and Fe and BMI (p?=?0.026, ρ?=??0.301). Thus, these elements may play a role in both forms of diabetes and combined mineral supplementations could have beneficial effects.     

Genetic and molecular characterization of the human Osteosarcoma 3AB‐OS cancer stem cell line: A possible model for studying osteosarcoma origin and stemness

Finding new treatments targeting cancer stem cells (CSCs) within a tumor seems to be critical to halt cancer and improve patient survival. Osteosarcoma is an aggressive tumor affecting adolescents, for which there is no second‐line chemotherapy. Uncovering new molecular mechanisms underlying the development of osteosarcoma and origin of CSCs is crucial to identify new possible therapeutic strategies. Here, we aimed to characterize genetically and molecularly the human osteosarcoma 3AB‐OS CSC line, previously selected from MG63 cells and which proved to have both in vitro and in vivo features of CSCs. Classic cytogenetic studies demonstrated that 3AB‐OS cells have hypertriploid karyotype with 71–82 chromosomes. By comparing 3AB‐OS CSCs to the parental cells, array CGH, Affymetrix microarray, and TaqMan® Human MicroRNA array analyses identified 49 copy number variations (CNV), 3,512 dysregulated genes and 189 differentially expressed miRNAs. Some of the chromosomal abnormalities and mRNA/miRNA expression profiles appeared to be congruent with those reported in human osteosarcomas. Bioinformatic analyses selected 196 genes and 46 anticorrelated miRNAs involved in carcinogenesis and stemness. For the first time, a predictive network is also described for two miRNA family (let‐7/98 and miR‐29a,b,c) and their anticorrelated mRNAs (MSTN, CCND2, Lin28B, MEST, HMGA2, and GHR), which may represent new biomarkers for osteosarcoma and may pave the way for the identification of new potential therapeutic targets. J. Cell. Physiol. 228: 1189–1201, 2013. © 2012 Wiley Periodicals, Inc.     

Exploration of the Genomic Diversity and Core Genome of the Bifidobacterium adolescentis Phylogenetic Group by Means of a Polyphasic Approach

In the current work, we describe genome diversity and core genome sequences among representatives of three bifidobacterial species, i.e., Bifidobacterium adolescentis, Bifidobacterium catenulatum, and Bifidobacterium pseudocatenulatum, by employing a polyphasic approach involving analysis of 16S rRNA gene and 16S-23S internal transcribed spacer (ITS) sequences, pulsed-field gel electrophoresis (PFGE), and comparative genomic hybridization (CGH) assays.     

Efficiency of flagging and dragging for tick collection

It is acknowledged that data from field studies on tick ecology might be biased by collection methods, but actually comparative studies are still limited. Herein we assessed whether the efficiency of flagging and dragging varies according to tick developmental stage, species, season and habitat. Ticks were collected in three sites bordered by an oak forest. The abundance of ticks collected by each collection method varied according to tick species, developmental stage, season, and habitat. Flagging was in general more efficient in collecting adult ticks, especially in spring and winter. Females were more frequently collected by flagging in the meadow and grassland habitats and males in the man-made trail. Flagging collected significantly more adults of Dermacentor marginatus, Hyalomma marginatum, Haemaphysalis inermis and Ixodes ricinus. Flagging was more efficient in collecting D. marginatus and I. ricinus in spring, and H. inermis and I. ricinus females in both spring and winter. In summer and autumn tick abundances were generally similar, with the exception of D. marginatus female in autumn. Flagging was more efficient in collecting D. marginatus adults in the meadow habitat and in the man-made trail, and I. ricinus adults in the meadow and grassland habitats. Dragging was more efficient in grassland for R. turanicus. Our results suggest that variations in terms of collection method performance are associated to factors linked to tick behaviour, habitat characteristics, and climate. Field studies employing these collection methods should take this into account to avoid misleading conclusions about tick population dynamics and tick-borne pathogen transmission risk.     

Life cycle assessment of cheese and whey production in the USA

Purpose

A life cycle assessment was conducted to determine a baseline for environmental impacts of cheddar and mozzarella cheese consumption. Product loss/waste, as well as consumer transport and storage, is included. The study scope was from cradle-to-grave with particular emphasis on unit operations under the control of typical cheese-processing plants.

Methods

SimaPro© 7.3 (PRé Consultants, The Netherlands, 2013) was used as the primary modeling software. The ecoinvent life cycle inventory database was used for background unit processes (Frischknecht and Rebitzer, J Cleaner Prod 13(13–14):1337–1343, 2005), modified to incorporate US electricity (EarthShift 2012). Operational data was collected from 17 cheese-manufacturing plants representing 24 % of mozzarella production and 38 % of cheddar production in the USA. Incoming raw milk, cream, or dry milk solids were allocated to coproducts by mass of milk solids. Plant-level engineering assessments of allocation fractions were adopted for major inputs such as electricity, natural gas, and chemicals. Revenue-based allocation was applied for the remaining in-plant processes.

Results and discussion

Greenhouse gas (GHG) emissions are of significant interest. For cheddar, as sold at retail (63.2 % milk solids), the carbon footprint using the IPCC 2007 factors is 8.60 kg CO₂e/kg cheese consumed with a 95 % confidence interval (CI) of 5.86–12.2 kg CO₂e/kg. For mozzarella, as sold at retail (51.4 % milk solids), the carbon footprint is 7.28 kg CO₂e/kg mozzarella consumed, with a 95 % CI of 5.13–9.89 kg CO₂e/kg. Normalization of the results based on the IMPACT 2002+ life cycle impact assessment (LCIA) framework suggests that nutrient emissions from both the farm and manufacturing facility wastewater treatment represent the most significant relative impacts across multiple environmental midpoint indicators. Raw milk is the major contributor to most impact categories; thus, efforts to reduce milk/cheese loss across the supply chain are important.

Conclusions

On-farm mitigation efforts around enteric methane, manure management, phosphorus and nitrogen runoff, and pesticides used on crops and livestock can also significantly reduce impacts. Water-related impacts such as depletion and eutrophication can be considered resource management issues—specifically of water quantity and nutrients. Thus, all opportunities for water conservation should be evaluated, and cheese manufacturers, while not having direct control over crop irrigation, the largest water consumption activity, can investigate the water use efficiency of the milk they procure. The regionalized normalization, based on annual US per capita cheese consumption, showed that eutrophication represents the largest relative impact driven by phosphorus runoff from agricultural fields and emissions associated with whey-processing wastewater. Therefore, incorporating best practices around phosphorous and nitrogen management could yield improvements.     

Description and ecology of new Pijnackeria stick insects: four bisexual species and a triploid parthenogen with their phyletic relationships

Recently, the Iberian stick insect genus Pijnackeria has been erected by splitting Leptynia Pantel on the basis of several distinguishing features. In addition to Pijnackeria hispanica, the tetraploid all‐female type species, molecular, karyological and SEM investigations led to the recognition of four bisexual and one triploid unisexual new species. Bisexuals' karyotypes (2n = 37/38) differ for minute traits and the haploid set is repeated, with few differences, three or four times in the polyploids that appeared to be of hybrid origin. Diagnostic morphological traits were found among body size parameters, antennal articles, male cerci, ovipositor valve and egg chorionic features. All species commonly feed on the broom Sarothamnus scoparius, but habitat disturbance appeared to induce food plant shifts. Moreover, trends from bisexuality to unisexuality through spanandry, probably related to habitat disruption, have been witnessed. The diploid species (Pijnackeria lucianae, Pijnackeria barbarae, Pijnackeria lelongi and Pijnackeria originis) have small ranges, while the polyploid hybrids (Pijnackeria masettii and P. hispanica) spread through Spain and Southern France, featuring a clear geographic parthenogenesis scenario, by colonizing wide areas and likely displacing their ancestors, or even leading them to extinction. Cyclic climatic changes and natural or anthropic habitat fragmentation may have been also of relevance in shaping present‐day distribution.     

Aerobic biodegradation of propylene glycol by soil bacteria

Propylene glycol (PG) is a main component of aircraft deicing fluids and its extensive use in Northern airports is a source of soil and groundwater contamination. Bacterial consortia able to grow on PG as sole carbon and energy source were selected from soil samples taken along the runways of Oslo Airport Gardermoen site (Norway). DGGE analysis of enrichment cultures showed that PG-degrading populations were mainly composed by Pseudomonas species, although Bacteroidetes were found, as well. Nineteen bacterial strains, able to grow on PG as sole carbon and energy source, were isolated and identified as different Pseudomonas species. Maximum specific growth rate of mixed cultures in the absence of nutrient limitation was 0.014 h^?1 at 4 °C. Substrate C:N:P molar ratios calculated on the basis of measured growth yields are in good agreement with the suggested values for biostimulation reported in literature. Therefore, the addition of nutrients is suggested as a suitable technique to sustain PG aerobic degradation at the maximum rate by autochthonous microorganisms of unsaturated soil profile.