Hyperglycosylation and reduced GABA currents of mutated GABRB3 polypeptide in remitting childhood absence epilepsy

Childhood absence epilepsy (CAE) accounts for 10% to 12% of epilepsy in children under 16 years of age. We screened for mutations in the GABA(A) receptor (GABAR) beta 3 subunit gene (GABRB3) in 48 probands and families with remitting CAE. We found that four out of 48 families (8%) had mutations in GABRB3. One heterozygous missense mutation (P11S) in exon 1a segregated with four CAE-affected persons in one multiplex, two-generation Mexican family. P11S was also found in a singleton from Mexico. Another heterozygous missense mutation (S15F) was present in a singleton from Honduras. An exon 2 heterozygous missense mutation (G32R) was present in two CAE-affected persons and two persons affected with EEG-recorded spike and/or sharp wave in a two-generation Honduran family. All mutations were absent in 630 controls. We studied functions and possible pathogenicity by expressing mutations in HeLa cells with the use of Western blots and an in vitro translation and translocation system. Expression levels did not differ from those of controls, but all mutations showed hyperglycosylation in the in vitro translation and translocation system with canine microsomes. Functional analysis of human GABA(A) receptors (alpha 1 beta 3-v2 gamma 2S, alpha 1 beta 3-v2[P11S]gamma 2S, alpha 1 beta 3-v2[S15F]gamma 2S, and alpha 1 beta 3-v2[G32R]gamma 2S) transiently expressed in HEK293T cells with the use of rapid agonist application showed that each amino acid transversion in the beta 3-v2 subunit (P11S, S15F, and G32R) reduced GABA-evoked current density from whole cells. Mutated beta 3 subunit protein could thus cause absence seizures through a gain in glycosylation of mutated exon 1a and exon 2, affecting maturation and trafficking of GABAR from endoplasmic reticulum to cell surface and resulting in reduced GABA-evoked currents.     

Generation of baculovirus vectors for the high-throughput production of proteins in insect cells

The baculovirus expression system is one of the most popular methods used for the production of recombinant proteins but has several complex steps which have proved inherently difficult to adapt to a multi-parallel process. We have developed a bacmid vector that does not require any form of selection pressure to separate recombinant virus from non-recombinant parental virus. The method relies on homologous recombination in insect cells between a transfer vector containing a gene to be expressed and a replication-deficient bacmid. The target gene replaces a bacterial replicon at the polyhedrin loci, simultaneously restoring a virus gene essential for replication. Therefore, only recombinant virus can replicate facilitating the rapid production of multiple recombinant viruses on automated platforms in a one-step procedure. Using this vector allowed us to automate the generation of multiple recombinant viruses with a robotic liquid handler and then rapidly screen infected insect cell supernatant for the presence of secreted proteins.     

Bacteriocin ST91KM, produced by Streptococcus gallolyticus subsp. macedonicus ST91KM, is a narrow-spectrum peptide active against bacteria associated with mastitis in dairy cattle

Streptococcus gallolyticus subsp. macedonicus ST91KM produces a bacteriocin (macedocin ST91KM) active against Streptococcus agalactiae, Streptococcus dysgalactiae subsp. dysgalactiae, Streptococcus uberis, Staphylococcus aureus, and Staphylococcus epidermidis. Macedocin ST91KM is, according to tricine-SDS PAGE, between 2.0 and 2.5 kDa in size. Antimicrobial activity remained unchanged after 2 h of incubation at pH 2.0-10.0 and after 100 min at 100 degrees C. The peptide was inactivated after 20 min at 121 degrees C and when treated with proteolytic enzymes. Treatment with alpha-amylase had no effect on activity, suggesting that the mode of action does not depend on glycosylation. Amplification of the genome of strain ST91KM with primers designed from the macedocin precursor gene (mcdA) produced 2 fragments (approximately 375 and 220 bp) instead of one 150-bp fragment, as recorded for macedocin produced by Streptococcus gallolyticus subsp. macedonicus ACA-DC 198. Strain ACA-DC 198 was not available. However, DNA amplified from strain LMG 18488 (ACA-DC 206), genetically closely related to strain ACA-DC 198, revealed 99% homology to the mcdA of strain ACA-DC 198 (accession No. DQ835394). Macedocin ST91KM may thus be a second putative bacteriocin described for Streptococcus gallolyticus subsp. macedonicus.     

Gibberellins and the floral transition in Sinapis alba

The putative role of gibberellins in the transition to flowering was investigated in Sinapis alba , a caulescent long-day (LD) plant. It was observed that: (1) physiological doses of exogenous gibberellins (GA₁, GA₃, GA₉) do not cause the floral shift of the meristem when applied to plants grown in short days but have some positive effect on the flowering response to a suboptimal LD; no inhibition was observed in any case; (2) GA-biosynthesis inhibitors (prohexadione-Ca and paclobutrazol) considerably inhibit stem growth but have some negative effect on flowering only when a suboptimal LD is given; and (3) the floral transition induced by one 22-h LD does not correlate with any detectable change in GA content of the apical bud, of the leaves, and of the phloem exudate reaching the apex. Taken together, these results suggest that GAs do not act as a major signal for photoperiodic flower induction in Sinapis .     

A plane intersect method for estimating fine root productivity of trees from minirhizotron images

The advent of minirhizotrons more than a decade ago has made the careful and widespread study of fine root dynamics of trees possible. However, to this day, the estimation of fine root productivity in terms of mass production per unit of ground surface from the minirhizotron data remains hampered by the difficulty in transforming images of roots captured along a two-dimensional plane into estimates of root volume or mass within a soil volume. In this work, we propose that the date of fine root appearance and the diameter of fine roots are the most robust variables that can be obtained from minirhizotron measurements of tree roots and that these two variables should be the basis of productivity estimates. The method proposed for estimating fine root productivity expands the line intersect method of Van Wagner (1968) into a plane intersect method that permits, with the appropriate volumetric transformations and corrections for tube and slope angles, the estimation of fine root productivity per unit ground area for specific periods. Examples of calculations are presented for two datasets obtained within two different forested sites, as well as a comparison with a methodology based on camera depth-of-view. The main weakness of the plane intersect method is the assumption that all fine root segments are independent. The correction for the fraction of coarse particles also creates uncertainty in the final estimate.     

A large-scale rheumatoid arthritis genetic study identifies association at chromosome 9q33.2

Rheumatoid arthritis (RA) is a chronic, systemic autoimmune disease affecting both joints and extra-articular tissues. Although some genetic risk factors for RA are well-established, most notably HLA-DRB1 and PTPN22, these markers do not fully account for the observed heritability. To identify additional susceptibility loci, we carried out a multi-tiered, case-control association study, genotyping 25,966 putative functional SNPs in 475 white North American RA patients and 475 matched controls. Significant markers were genotyped in two additional, independent, white case-control sample sets (661 cases/1322 controls from North America and 596 cases/705 controls from The Netherlands) identifying a SNP, rs1953126, on chromosome 9q33.2 that was significantly associated with RA (OR(common) = 1.28, trend P(comb) = 1.45E-06). Through a comprehensive fine-scale-mapping SNP-selection procedure, 137 additional SNPs in a 668 kb region from MEGF9 to STOM on 9q33.2 were chosen for follow-up genotyping in a staged-approach. Significant single marker results (P(comb)<0.01) spanned a large 525 kb region from FBXW2 to GSN. However, a variety of analyses identified SNPs in a 70 kb region extending from the third intron of PHF19 across TRAF1 into the TRAF1-C5 intergenic region, but excluding the C5 coding region, as the most interesting (trend P(comb): 1.45E-06 --> 5.41E-09). The observed association patterns for these SNPs had heightened statistical significance and a higher degree of consistency across sample sets. In addition, the allele frequencies for these SNPs displayed reduced variability between control groups when compared to other SNPs. Lastly, in combination with the other two known genetic risk factors, HLA-DRB1 and PTPN22, the variants reported here generate more than a 45-fold RA-risk differential.     

Stress-induced mobility of OPHIO1 and OPHIO2, DNA transposons of the Dutch elm disease fungi.

The mobility of transposable elements (TEs) can contribute to genome plasticity, under- or over-expression of genes and ectopic recombination. The data collected in this study provide evidence of stress-induced mobility of OPHIO1 and OPHIO2 transposons, recently detected in Ophiostoma ulmi and O. novo-ulmi, the causal agents of Dutch elm disease (DED). The analyses of OPHIO UTRs and TIRs indicated the presence of two potential binding site motifs and a heat shock protein (hsp) promoter which could be involved in the mobility of OPHIO1 following a heat shock stress. The exact position of the hsp promoter was determined by 5' RACE PCR. After confirmation of the expression by RT-PCR of both OPHIO1 and OPHIO2 transposases in the absence of stress factors, we tested two experimental procedures to induce mobility of OPHIO TEs: (1) an exogenous (cloned) copy of OPHIO1 was introduced into the O. novo-ulmi subsp. americana strain W2 (OPHIO1 free strain) to give mutant strain W2:OPHIO1. After exposure of W2:OPHIO1 to a 55 degrees C heat shock treatment, some of the survivors showed signs of incomplete transposition (excision without reinsertion) of OPHIO1. (2) The O. novo-ulmi subsp. novo-ulmi strain AST27, introgressed from O. ulmi and carrying a distinct endogenous copy of OPHIO2 (OPHIO2-int.), was subjected to a series of abiotic stress treatments. Although a promoter sequence could not be identified, both exposures to UV light and to a 4 degrees C cold treatment caused perfect excision of OPHIO2-int. In contrast to OPHIO1, heat shock stress did not induce OPHIO2-int. mobility. Taken together, these results allow us to hypothesize a potential interspecific invasion of OPHIO transposons due to their mobility in Ophiostoma spp.     

Mechanisms of oral tolerance revisited

Oral tolerance induction is thought to depend on special antigen presenting cells in the gut. A new report in the previous issue of Arthritis Research & Therapy supports this idea by demonstrating that indoleamine 2,3-dioxygenase-expressing dendritic cells in Peyer's patches from orally tolerized mice suppress T-cell responses via the generation of CD4+CD25+ regulatory T cells. This finding provides novel input into the mechanisms of oral tolerance that could further facilitate its use for the treatment of autoimmunity and chronic inflammatory reactions.     

Polyelectrolyte multilayers for tunable release of antibiotics

Polyelectrolyte multilayers incorporating gentamicin were fabricated using layer-by-layer deposition. The multilayers could be precisely tuned with regard to dosage, and release rate under aqueous physiological conditions could be controlled. The films were demonstrated efficacious against Staphylococcus aureus and nontoxic toward murine osteoblasts MC3T3. The films were made in a layer-by-layer process with a heterostructural architecture that represents a general strategy for incorporating charged small molecular species into polyelectrolyte multilayers without the need for any physical or chemical premodification, expanding the range of active species that can be delivered from these films while maintaining the ease of layer-by-layer fabrication process.