Anti-adhesive Property of Maize Leaf Surface Related with Temperature and Humidity

The anti-adhesive surfaces have always aroused great interest of worldwide scientists and engineers.But in practical applications,it often faces the threat and impact of temperature and humidity.In this work,the excellent anti-adhesive performance of maize leaf under high temperature and humidity were investigated in detail.Firstly,the adhesion forces of the maize leaf surface under different temperature and humidity were measured by using Atomic Force Microscopy (AFM).The temperature of the substrate was varied between 23 ℃ to 100 ℃,and the ambient relative humidity is from 18％ to 100％.It was found that the adhesion force of maize leaf decreased with the increase of temperature and humidity.The mechanism of its excellent anti-adhesive performance of maize leaf under high temperature and relative humidity was revealed.The transverse and longitudinal ridges on maize leaf surface interlace with each other,forming small air pockets,which reduces the actual contact area between the object and the maize leaf.With the increase of humidity,the liquid film will be formed in the air pockets gradually and so much water vapor is produced with increase of temperature.Then the air flow rate increases though the wavy top of transverse ridges,inducing the dramatic decrease of adhesion force.Inspired by this mechanism,four samples with this bionic structure were made.This functional "biomimetic structure" would have potential value in the wide medical equipments such as high frequency electric knife with anti-adhesion surface under high temperature and high humidity.     

Morphophysiological,ultrastructural, and nutritional changes induced by Cu toxicity in young Erythrina fusca plants

Erythrina fusca is an important legume used for shade cover in cacao plantations in Brazil. Cacao plantations receive large quantities of copper (Cu)-containing agrochemicals, mainly for control of diseases. Therefore, Cu toxicity was investigated in seedlings grown in hydroponics with increasing concentrations of Cu (0.005–32 mg L^?1) in a greenhouse. Ultrastructural analyses showed cell plasmolysis in the root cortical area and changes in thylakoid membranes at 8 mg Cu L^?1 and higher. There were changes in epicuticular wax deposition on the leaf surface at the 16 and 32 mg Cu L^?1 treatments. Leaf gas exchanges were highly affected 24 hours after application of treatments beginning at 8 mg Cu L^?1 and higher Cu concentrations. Chemical analyses showed that Cu content in E. fusca roots increased as Cu concentration in the nutrient solution increased, whereas the shoot did not show significant changes. It is also observed that excess Cu interfered with Zn, Fe, Mn, Mg, K, P, and Ca content in the different E. fusca organs. Investigation of Cu toxicity symptoms focusing on morphophysiological, ultrastructural, gas exchange, and nutritional changes would be useful to alleviate Cu toxicity in E. fusca under field conditions, an important agroforestry species in cacao plantation.     

Monitoring Thermal Annealing of Perovskite Solar Cells with In Situ Photoluminescence

Layer deposition of organometal halide perovskites for solar cells usually involves tedious experimentation to establish the optimum processing conditions. Important parameters are the time and temperature of thermal annealing. Here, it is demonstrated that in situ photoluminescence allows to determine the optimal annealing procedure without fabricating complete solar cells. A deposition method is used in which dense layers of perovskite crystals are formed within seconds in ambient air by hot casting a mixture of lead acetate, lead chloride, and methylammonium iodide. The as‐cast perovskite layers are highly luminescent because charge carriers are unable to reach the charge extraction layers that quench the photoluminescence. Thermal annealing enhances charge transport and quenches the photoluminescence, but deteriorates the photovoltaic performance via decomposition of the perovskite if applied for a too long time. It is demonstrated that the optimal annealing time coincides with the time required for the in situ measured photoluminescence intensity to reach its baseline value for annealing temperatures in the range of 80–100 °C. This results in efficient (>14%) perovskite solar cells and shows that in situ photoluminescence is a simple but powerful tool for in‐line quality monitoring of perovskite films.     

High‐Performance and Stable All‐Polymer Solar Cells Using Donor and Acceptor Polymers with Complementary Absorption

To explore the advantages of emerging all‐polymer solar cells (all‐PSCs), growing efforts have been devoted to developing matched donor and acceptor polymers to outperform fullerene‐based PSCs. In this work, a detailed characterization and comparison of all‐PSCs using a set of donor and acceptor polymers with both conventional and inverted device structures is performed. A simple method to quantify the actual composition and light harvesting contributions from the individual donor and acceptor is described. Detailed study on the exciton dissociation and charge recombination is carried out by a set of measurements to understand the photocurrent loss. It is unraveled that fine‐tuned crystallinity of the acceptor, matched donor and acceptor with complementary absorption and desired energy levels, and device architecture engineering can synergistically boost the performance of all‐PSCs. As expected, the PBDTTS‐FTAZ:PNDI‐T10 all‐PSC attains a high and stable power conversion efficiency of 6.9% without obvious efficiency decay in 60 d. This work demonstrates that PNDI‐T10 can be a potential alternative acceptor polymer to the widely used acceptor N2200 for high‐performance and stable all‐PSCs.     

Levels of extra‐pair paternity are associated with parental care in penduline tits (Remizidae)

In most passerine birds, individuals attempt to maximize their fitness by providing parental care while also mating outside their pair bond. A sex‐specific trade‐off between these two behaviours is predicted to occur, as the fitness benefits of extra‐pair mating differ between the sexes. We use nest observations and parentage analysis to reveal a negative association between male care and the incidence of extra‐pair paternity across three species of penduline tit (Remizidae). This provides evidence of a trade‐off between these two behaviours, possibly due to the devaluing of paternal care by extra‐pair offspring.     

An edge-centric perspective on the human connectome: link communities in the brain

Brain function depends on efficient processing and integration of information within a complex network of neural interactions, known as the connectome. An important aspect of connectome architecture is the existence of community structure, providing an anatomical basis for the occurrence of functional specialization. Typically, communities are defined as groups of densely connected network nodes, representing clusters of brain regions. Looking at the connectome from a different perspective, instead focusing on the interconnecting links or edges, we find that the white matter pathways between brain regions also exhibit community structure. Eleven link communities were identified: five spanning through the midline fissure, three through the left hemisphere and three through the right hemisphere. We show that these link communities are consistently identifiable and investigate the network characteristics of their underlying white matter pathways. Furthermore, examination of the relationship between link communities and brain regions revealed that the majority of brain regions participate in multiple link communities. In particular, the highly connected and central hub regions showed a rich level of community participation, supporting the notion that these hubs play a pivotal role as confluence zones in which neural information from different domains merges.