Continuous immobilized yeast reactor system for complete beer fermentation using spent grains and corncobs as carrier materials

Despite extensive research carried out in the last few decades, continuous beer fermentation has not yet managed to outperform the traditional batch technology. An industrial breakthrough in favour of continuous brewing using immobilized yeast could be expected only on achievement of the following process characteristics: simple design, low investment costs, flexible operation, effective process control and good product quality. The application of cheap carrier materials of by-product origin could significantly lower the investment costs of continuous fermentation systems. This work deals with a complete continuous beer fermentation system consisting of a main fermentation reactor (gas-lift) and a maturation reactor (packed-bed) containing yeast immobilized on spent grains and corncobs, respectively. The suitability of cheap carrier materials for long-term continuous brewing was proved. It was found that by fine tuning of process parameters (residence time, aeration) it was possible to adjust the flavour profile of the final product. Consumers considered the continuously fermented beer to be of a regular quality. Analytical and sensorial profiles of both continuously and batch fermented beers were compared.     

Spirochaeta coccoides sp. nov., a novel coccoid spirochete from the hindgut of the termite Neotermes castaneus

A novel spirochete strain, SPN1, was isolated from the hindgut contents of the termite Neotermes castaneus. The highest similarities (about 90%) of the strain SPN1 16S rRNA gene sequence are with spirochetes belonging to the genus Spirochaeta, and thus, the isolate could not be assigned to the so-called termite clusters of the treponemes or to a known species of the genus Spirochaeta. Therefore, it represents a novel species, which was named Spirochaeta coccoides. In contrast to all other known validly described spirochete species, strain SPN1 shows a coccoid morphology and is immotile. The isolated strain is obligately anaerobic and ferments different mono-, di-, and oligosaccharides by forming formate, acetate, and ethanol as the main fermentation end products. Furthermore, strain SPN1 is able to grow anaerobically with yeast extract as the sole carbon and energy source. The fastest growth was obtained at 30 degrees C, the temperature at which the termites were also grown. The cells possess different enzymatic activities that are involved in the degradation of lignocellulose in the termite hindgut, such as beta-D-glucosidase, alpha-L-arabinosidase, and beta-D-xylosidase. Therefore, they may play an important role in the digestion of breakdown products from cellulose and hemicellulose in the termite gut.     

Protein reutilisation in corms of Colchicum autumnale

Colchicum autumnale L. is a monocotyledonous geophyte with hysteranthous leaves, i.e. flowering and leaf growth occur in different time periods. Because after the starch, the second prominent storage compound of corm is represented by proteins, we were interested in nitrogen remobilisation during the annual life cycle of C. autumnale. In this context the content of soluble and insoluble proteins were measured in parallel with determination of some exo-and endopeptidase activities. Our results indicate that the continual proteolysis occurs in both mother and new daughter corms during the whole life-cycle of the plant. L-Ala-aminopeptidase and trypsin-like endopeptidase were the most active peptidases in both mother and daughter corms. As the protein level of mother corm did not change significantly during the development of the future above-ground part under the soil surface (the first, autumnal developmental stage), the developmental profile of nitrate reductase activity was estimated followed by evaluation of total nitrogen and amino acid contents. Significant activity of root nitrate reductase was detected in the roots only in the second, vernal stage. Our results showed that the stored proteins constituted a relevant nitrogen source partly required by the growth processes of the late autumnal stage, but mainly by the intensive growth of leaves and reproductive structures during the second, photosynthetically active stage of the life-cycle.     

New monodisperse magnetic polymer microspheres biofunctionalized for enzyme catalysis and bioaffinity separations

Magnetic macroporous PGMA and PHEMA microspheres containing carboxyl groups are synthesized by multi-step swelling and polymerization followed by precipitation of iron oxide inside the pores. The microspheres are characterized by SEM, IR spectroscopy, AAS, and zeta-potential measurements. Their functional groups enable bioactive ligands of various sizes and chemical structures to couple covalently. The applicability of these monodisperse magnetic microspheres in biospecific catalysis and bioaffinity separation is confirmed by coupling with the enzyme trypsin and huIgG. Trypsin-modified magnetic PGMA-COOH and PHEMA-COOH microspheres are investigated in terms of their enzyme activity, operational and storage stability. The presence of IgG molecules on microspheres is confirmed.     

Thermoimaging as a tool for studying light-induced heating of leaves: Correlation of heat dissipation with the efficiency of photosystem II photochemistry and non-photochemical quenching

Thermoimaging – a highly sensitive and non-invasive method of temperature measurement – was applied to explore the role of changing photosynthetic efficiency in light-induced heating of tobacco (Nicotiana tabacum cv. Samsun) leaves. In the absence of evaporative cooling through the stomata, which was achieved by covering leaves with Vaseline, illumination with 50–1400 μM photons m^?2 s^?1 intensity of photosynthetically active radiation resulted in ≈1–5 °C leaf temperature increase in about 2 min. The heating effect showed a non-linear correlation with the extent of non-photochemical quenching (NPQ) resulting in higher leaf temperatures at higher NPQ values. When leaves were adapted to excessive irradiance (1300 μM photons m^?2 s^?1 for 6 h), which resulted in reduction of photosynthetic efficiency and amplification of NPQ the light-induced heating effect was enhanced. The experimental results have been explained on the basis of a simple theoretical model characterizing the balance of energy fluxes in leaves in relation to the efficiency of photosystem II photochemistry and non-photochemical quenching. The role of alternative energy dissipation pathways outside of PSII in the phenomenon of light-induced leaf heating is also discussed.     

Déjà vu in proteomics. A hit parade of repeatedly identified differentially expressed proteins

After reading many 2-DE-based articles featuring lists of the differentially expressed proteins, one starts experiencing a disturbing déjà vu. The same proteins seem to predominate regardless of the experiment, tissue or species. To quantify the occurrence of individual differentially expressed proteins in 2-DE experiment reports, we compiled the identities of differentially expressed proteins identified in human, mouse, and rat tissues published in three recent volumes of Proteomics and calculated the appearance of the most predominant proteins in the dataset. The most frequently identified protein is a highly abundant glycolytic enzyme enolase 1, differentially expressed in nearly every third experiment on both human and rodent tissues. Heat-shock protein 27 (HSP27) and heat-shock protein 60 (HSP60) were differentially expressed in about 30 percent of human and rodent samples, respectively. Considering protein families as units, keratins and peroxiredoxins are the most frequently identified molecules, with at least one member of the group being differentially expressed in about 40 percent of all experiments. We suggest that the frequent identification of these proteins must be considered in the interpretation of any 2-DE studies. We consider if these commonly observed changes represent common cellular stress responses or are a reflection of the technical limitations of 2-DE.     

Mechanical unloading impairs keratinocyte migration and angiogenesis during cutaneous wound healing.

Although initially thought to improve an individual's ability to heal, mechanical unloading promoted by extended periods of bed rest has emerged as a contributing factor to delayed or aberrant tissue repair. Using a rat hindlimb unloading (HLU) model of hypogravity, we mimicked some aspects of physical inactivity by removing weight-bearing loads from the hindlimbs and producing a systemic cephalic fluid shift. This model simulates bed rest in that the animal undergoes physiological adaptations, resulting in a reduction in exercise capability, increased frequency of orthostatic intolerance, and a reduction in plasma volume. To investigate whether changes associated with prior prolonged bed rest correlate with impaired cutaneous wound healing, we examined wound closure, angiogenesis, and collagen content in day 2 to day 21 wounds from rats exposed to HLU 2 wk before excisional wounding. Wound closure was delayed in day 2 wounds from HLU rats compared with ambulatory controls. Although the levels of proangiogenic growth factors, fibroblast growth factor-2 (FGF-2), and vascular endothelial growth factor (VEGF) were similar between the two groups, wound vascularity was significantly reduced in day 7 wounds from HLU animals. To further examine this disparity, total collagen content was assessed but found to be similar between the two groups. Taken together, these results suggest that keratinocyte and endothelial cell function may be impaired during the wound healing process under periods of prolonged inactivity or bed rest.     

P300 wave: a comparative study of impulsive aggressive criminals

Event-Related potentials are a simple non-invasive neurophysiological method enabling to comprehend certain aspects of the cognitive processing of information in humans. The best-known component of Event-Related Potentials is the so-called P3 wave. Alterations in the parameters of P300 wave have been discovered in certain personality disorders and in persons with impulsively aggressive behaviour. The purpose of this study is to investigate the changes of these parameters, especially an amplitude and latency in the place of Pz electrode. We examined 15 persons with the impulsive aggressive behaviour and compared them to a population comparable of normal age, gender and approximate degree of education. We used P300 auditory and a neuropsychological Eysenck IVE battery. The results showed that significantly lower amplitudes had been found in the aggressive impulsive subjects as compared to the control group. No statistically significant differences have been discovered in the latency. These results seem to confirm previous studies.     

Rheological properties of myometrium: experimental quantification and mathematical modeling

This work answers some questions related to detection of rheological properties of soft tissues exemplified in myometrium, stressed by external tensile force. In the first stage of the experiment the tissue samples were ciclically stressed and response loops were recorded. This test proved severe plastical deformation of samples, which is not usually being stated for living tissues. In addition to course, growth and stabilizing this deformation also energetical losses of individual hysteresis loops of the response were evaluated. In the second stage of the experiment the tissue samples were exposed to a loading force changed in step-wise manner in four steps. The sample response to each force step was processed and evaluated separately to obtain basic properties of used model. In next step, the changes in model characteristics were obtained and evaluated for each element in subsequent force steps. By reason of following easier interpretation, the quite simple visco-elastic model, defined by differential equation with analytic solution, is used. The results prove necessary to introduce in model both spring and damper constants dependent on the magnitude of the loading force and one damper with even time dependent constant. The interindividual variability of characteristic values of the model elements is surprisingly low. On the other side, they are strongly dependent on load magnitude. Complete mathematical model of uterine wall tissue is obtained by amending the principal equation by formulas describing changes in individual components of the model.