Indole-3-piperazinyl derivatives: novel chemical class of 5-HT(6) receptor antagonists

N₁-Arylsulfonyl-3-piperazinyl indole derivatives were designed and identified as a novel class of 5-HT₆ receptors ligands. All the compounds have high affinity and antagonist activity towards 5-HT₆ receptor. The compound 7a (K_i = 3.4 nM, functional assay IC₅₀ = 310 nM) shows enhanced cognitive effect when tested in NORT and Morris water maze models. Synthesis, SAR and PK profile of these novel compounds constitute the subject matter of this Letter.     

Rapid In Vitro Propagation of East Indian Rosewood (Dalbergia latifolia Roxb.) through High Frequency Shoot Proliferation from Cotyledonary Nodes

An efficient protocol is described for large scale in vitro propagation of east Indian rosewood (Dalbergia latifolia Roxb.) using cotyledonary nodes derived from axenic seedlings. Of the four different cytokinins tested, BA was most effective in inducing multiple shoot buds in the explants. High frequency shoot proliferation (93%) coupled with maximum number of shoot formation (10-12 shoots/explant) was recorded on Murashige and Skoog’s medium supplemented with 2.0 mg/l BA. The frequency of shoot proliferation declined at higher levels of cytokinins. Shoot culture was multiplied by subculturing the original cotyledonary node on a fresh shoot multiplication medium each time aHer excising the newly formed shoots. Shoots obtained from each passage were multiplied further as nodal explants and each node produced 3-4 shoots. In two months from a single cotyledonary node, about 90 shoots were obtained. Rooting was induced in 72% of the regenerated shoots on half-strength MS containing IAA, IBA and IPA each at 1.0 mg/l. Rooted plantlets were hardened off and eventually established in soil.     

Physicomechanical Characterization and Optimization of EDTA–mPEG and Avicel®–EDTA–mPEG In Situ Melt Dispersion Mini-Pellets

The purpose of this study was to develop a physicomechanically customizable oral metal chelatory in situ hot melt dispersion mini-pellet entity which could be utilized within a binary drug delivery system. Avicel^® RC/CL type R-591 was included within the in situ hot melt dispersion mini-pellet formulations to determine the physicomechanical effect this compound would have on the mini-pellet formulations. The physicomechanical properties of the hot melt in situ mini-pellet formulations were mathematically fitting to regression curves. Physicomechanical adjustment of the in situ hot melt dispersion mini-pellet formulations could be mathematically predicted with the derived regression curve equations. The addition of Avicel^® RC/CL type R-591 increased the physicomechanical properties such as matrix hardness and increased total disintegration of the in situ hot melt dispersion mini-pellet formulations. The utilization of a physicomechanically customizable oral metal chelatory in situ hot melt dispersion mini-pellet entity within a binary drug delivery system would to achieve a synergistically enhance the activity of a drug-carrying entity or a permeation enhancing entity within a single drug delivery unit. The experimental results indicated that weights of the pellets that achieved optimal hardness ranged between 35 and 45 mg. The melt–dispersion formulations disintegrated within shorter time periods and maintained higher ethylenediaminetetraacetic acid (EDTA) concentrations whereas melt–dispersion formulations which included Avicel^® had superior physicomechanical properties. Disintegration times ranged between 1,000 s for melt–dispersions containing EDTA and methyloxy polyethylene glycol 2000 (mPEG) only, to >6,000 s for melt–dispersions comprising EDTA, mPEG, and Avicel^®.     

Inactivation of spores by nonthermal plasmas

Bacterial and fungal spore contamination in different industries has a greater economic impact. Because of the remarkable resistance of spores to most physical and chemical microbicidal agents, their inactivation need special attention during sterilization processes. Heat and chemical sporicides are not always well suited for different sterilization/decontamination applications and carries inherent risks. In recent years, novel nonthermal agents including nonthermal plasmas are emerging as effective sporicides against a broad spectrum of bacterial and fungal spores. The present review discusses various aspects related to the inactivation of spores using nonthermal plasmas. Different types of both low pressure plasmas (e.g., capacitively coupled plasma and microwave plasma) and atmospheric pressure plasmas (e.g., dielectric barrier discharges, corona discharges, arc discharges, radio-frequency-driven plasma jet) have been successfully applied to destroy spores of economic significance. Plasma agents contributing to sporicidal activity and their mode of action in inactivation are discussed. In addition, information on factors that affect the sporicidal action of nonthermal plasmas is included.     

An extremely alkaline mannanase from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. CS428 hydrolyzes galactomannan producing series of mannooligosaccharides

An alkaline-thermostable mannanase from Streptomyces sp. CS428 was produced, purified, and biochemically characterized. The extracellular mannanase (Mn428) was purified to homogeneity with 12.4 fold, specific activity of 2406.7 U/mg, and final recovery of 37.6 %. The purified β-mannanase was found to be a monomeric protein with a molecular mass of approximately 35 kDa as analyzed by SDS-PAGE and zymography. The first N-terminal amino acid sequences of mannanase enzyme were HIRNGNHQLPTG. The optimal temperature and pH for enzyme were 60 °C and 12.5, respectively. The mannanase activities were significantly affected by the presence of metal ions, modulators, and detergents. K_m and V_max values of Mn428 were 1.01 ± 3.4 mg/mL and 5029 ± 85 µmol/min mg, respectively when different concentrations (0.6–10 mg/mL) of locust bean gum galactomannan were used as substrate. The substrate specificity of enzyme showed its highest specificity towards galactomannan which was further hydrolyzed to produce mannose, mannobiose, mannotriose, and a series of mannooligosaccharides. Mannooligosaccharides can be further converted to ethanol production, thus the purified β-mannanase isolated from Streptomyces sp. CS428 was found to be attractive for biotechnological applications.     

Monomerization alters the dynamics of the lid region in Campylobacter jejuni CstII: an MD simulation study

CstII, a bifunctional (α2,3/8) sialyltransferase from Campylobacter jejuni, is a homotetramer. It has been reported that mutation of the interface residues Phe121 (F121D) or Tyr125 (Y125Q) leads to monomerization and partial loss of enzyme activity, without any change in the secondary or tertiary structures. MD simulations of both tetramer and monomer, with and without bound donor substrate, were performed for the two mutants and WT to understand the reasons for partial loss of activity due to monomerization since the active site is located within each monomer. RMSF values were found to correlate with the crystallographic B-factor values indicating that the simulations are able to capture the flexibility of the molecule effectively. There were no gross changes in either the secondary or tertiary structure of the proteins during MD simulations. However, interface is destabilized by the mutations, and more importantly the flexibility of the lid region (Gly152-Lys190) is affected. The lid region accesses three major conformations named as open, intermediate, and closed conformations. In both Y121Q and F121D mutants, the closed conformation is accessed predominantly. In this conformation, the catalytic base His188 is also displaced. Normal mode analysis also revealed differences in the lid movement in tetramer and monomer. This provides a possible explanation for the partial loss of enzyme activity in both interface mutants. The lid region controls the traffic of substrates and products in and out of the active site, and the dynamics of this region is regulated by tetramerization. Thus, this study provides valuable insights into the role of loop dynamics in enzyme activity of CstII.     

Distribution of myctophid resources in the Indian Ocean

Mesopelagics are one of the largest under-exploited marine resources with wide distribution in the world oceans. Lanternfishes are the key members of mesopelagic communities and the total resource in the world oceans is estimated at 600 million tons. Lanternfishes belong to the family Myctophidae which comprises of about 250 species in 35 genera. Myctophids account for about 75% of total global catch of small mesopelagic fishes. They are known to exhibit diel vertical migration, concentrating during the day time between 400 and 1,000 m, and between 5 and 100 m, during the night. In this paper, an attempt is made to review the existing information on the occurrence and distribution of myctophid resources in the Indian Ocean. 137 myctophid species have been reported from the entire Indian Ocean. Studies in the Arabian Sea have indicated that the area is rich in the midwater fish stocks dominated by myctophids with an estimated potential of 100 million tons.     

Haptoglobin polymorphism among fourteen populations of India

Haptoglobin (HP) is a serum protein that has the capability of binding the extracorpuscular haemoglobin released during haemolysis. It plays an important role in protection of haemolytic disease by reducing the oxidative and peroxidative potential at free haemoglobin. The present study was aimed to determine the prevalence of HP polymorphism among different Indian populations, anthropologically belonging to diverse ethnicity. The polymorphism was screened among 642 unrelated individuals belonging to 14 population groups of India including both tribal and non-tribal caste groups from different geographical regions of India with distinct linguistic affiliations. An attempt is also made to understand the distribution of HP polymorphism among the studied populations. The result reveals the HP gene to be polymorphic in all the studied populations. Except the two tribal populations (Thotis of Andhra Pradesh and Patelias of Rajasthan) and one caste population (Rajput of Himachal Pradesh), all the studied populations are found to obey the Hardy-Weinberg equilibrium. The significance of the present study is elucidated with the prevalence of high mutant HP*2 allele frequency in India. Selection could be one of the most plausible explanations for this high HP frequency because of its uniformly high occurrence among all the studied populations.     

Intra- and inter-subunit disulfide bond formation is nonessential in adeno-associated viral capsids

The capsid proteins of adeno-associated viruses (AAV) have five conserved cysteine residues. Structural analysis of AAV serotype 2 reveals that Cys289 and Cys361 are located adjacent to each other within each monomer, while Cys230 and Cys394 are located on opposite edges of each subunit and juxtaposed at the pentamer interface. The Cys482 residue is located at the base of a surface loop within the trimer region. Although plausible based on molecular dynamics simulations, intra- or inter-subunit disulfides have not been observed in structural studies. In the current study, we generated a panel of Cys-to-Ser mutants to interrogate the potential for disulfide bond formation in AAV capsids. The C289S, C361S and C482S mutants were similar to wild type AAV with regard to titer and transduction efficiency. However, AAV capsid protein subunits with C230S or C394S mutations were prone to proteasomal degradation within the host cells. Proteasomal inhibition partially blocked degradation of mutant capsid proteins, but failed to rescue infectious virions. While these results suggest that the Cys230/394 pair is critical, a C394V mutant was found viable, but not the corresponding C230V mutant. Although the exact nature of the structural contribution(s) of Cys230 and Cys394 residues to AAV capsid formation remains to be determined, these results support the notion that disulfide bond formation within the Cys289/361 or Cys230/394 pair appears to be nonessential. These studies represent an important step towards understanding the role of inter-subunit interactions that drive AAV capsid assembly.     

Titin organisation and the 3D architecture of the vertebrate-striated muscle I-band

The giant muscle protein titin (connectin) is known to serve as a cytoskeletal element in muscle sarcomeres. It elastically restrains lengthening sarcomeres, it aids the integrity and central positioning of the A-band in the sarcomere and it may act as a template upon which some sarcomeric components are laid down during myogenesis. A puzzle has been how titin molecules, arranged systematically within the hexagonal A-band lattice of myosin filaments, can redistribute through the I-band to their anchoring sites in the tetragonal Z-band lattice. Recent work by Liversage and colleagues has suggested that there are six titin molecules per half myosin filament. Since there are two actin filaments per half myosin filament in a half sarcomere, this means that there are three titin molecules interacting with each Z-band unit cell containing one actin filament in the same sarcomere and one of opposite polarity from the next sarcomere. Liversage et al. suggested that the three titins might be distributed with two on an actin filament of one polarity and one on the filament of opposite polarity. Here, we build on this suggestion and discuss the transition of titin from the A-band to the Z-band. We show that there are good structural and mechanical reasons why titin might be organised as Liversage et al., suggested and we discuss the possible relationships between A-band arrangements in successive sarcomeres along a myofibril.