Identification of five hemoglobins in B6C3F1 mice by mass spectrometry and sequence analysis

The aim of the work is to identify and characterize the hemoglobins found in B6C3F1 mice using mass spectrometry. The primary structures are compared to those reported for BALB/c mice. Individual hemoglobin chains were isolated by reversed-phase high performance liquid chromatography (RP-HPLC). The molecular masses of the globins were determined using electrospray ionization (ESI) and matrix-assisted laser desorption ionization (MALDI). The purified globin chains were enzymatically cleaved and the resulting peptides were separated by RP-HPLC. The chains were identified by N-terminal sequencing and mass spectrometry (MALDI). Selected peptides were analysed by Edman degradation. ESI analysis indicates that B6C3F1 mice have two -globin chains (-1 and -2) and at least three β-globin chains, β-1, β-2 and β-3. This is one additional - and one additional β-globin chain than reported in the literature for BALB/c mice. Mass and sequence analysis of enzymatically generated peptides showed variations in the amino acid sequence in the -1, -2, β-2 and β-3 chains compared to the BALB/c mouse hemoglobins (, β^minor and β^major). The study showed that mass spectrometry in combination with traditional protein chemistry is able to identify and locate minor protein sequence variations.     

Labeling of insulin with non-radioactive I and application to incorporation of radioactive I for use in receptor-binding experiments by high-performance liquid chromatography

Conditions for the labeling of insulin with radioactive iodine isotopes were investigated by means of incorporation of non-radioactive ¹²⁷I into the peptide. Either the chloramine-T (CT) or lactoperoxidase-hydrogen peroxide (LPO) technique was applied and reversed-phase high-performance liquid chromatography (RP-HPLC) was used for analysis of the reaction products. The LPO method provided the ¹²⁷I-labeled peptide within 15–30 min, whereas the CT alternative yielded the labeled substrate even within 15 s. However, the latter reaction can only be controlled in a reproducible manner with difficulty and undesirad side-reactions became increasingly prominent when t a few seconds. In another experiment, the LPO technique was applied for radiolabeling insulin with ¹²⁵I. The product was first purified by size-exclusion chromatography (SEC) and then subjected to RP-HPLC. SEC yielded two peaks. The smaller one, which eluted at a slightly higher K_d value (accounting for about 14% of total radioactivity) predominantly consisted of material eluting at the column's void volume under the conditions of RP-HPLC, whereas the main SEC fraction (accounting for about 86% of total radioactivity) yielded a single peak, as shown by HPLC. The radioactive material attributable to the main SEC fraction revealed the expected receptor-binding properties, as evidenced by displacement experiments with non-radioactive insulin, as well as the action of tetradecanoyl phorbol acetate on the binding characteristics and thus indicating formation of a labeled hormone retaining biological activity.     

Detection and identification of ferricrocin produced by ectendomycorrhizal fungi in the genusWilcoxina

The ectendomycorrhizal fungiWilcoxina mikolae isolates CSY-14 and RMD-947 andW. rehmii isolate CSY-85 were grown in pure culture under iron-limiting conditions. All three isolates tested positive for siderophore formation using both the ferric perchlorate assay and a sensitive HPLC iron-binding assay. A peptide siderophore was isolated from the culture medium by HPLC and shown to contain the amino acids serine, glycine and ornithine in a 1:2:3 ratio. This siderophore was identified as ferricrocin on the basis of electrospray mass spectroscopy and its co-chromatography in two different HPLC systems with ferricrocin isolated fromAspergillus fumigatus. Ferricrocin was the only siderophore isolated from theseWilcoxina cultures. This is the first report of siderophore formation by ectendomycorrhizal fungi.     

Modeling of the H-reflex facilitation during ramp and hold contractions

Healthy subjects were asked to make a voluntary ramp and hold contraction. The duration of the ramp stage was 500 ms, and the torque increment in this period was set to 15 Nm. The contraction was made from a relaxed and from a 5 Nm background torque situation. Hoffmann (H-) reflexes were elicited during the voluntary contraction, mostly with 100 ms intervals. These experiments showed an increase (facilitation) in the H-reflex before the torque or the EMG started to increase. This facilitation of the H-reflex remained during all the stages of the voluntary movement and declined to normal levels again only at the very end of the hold phase, which lasted for one second. This specific pattern of facilitation during a voluntary contraction was modeled using a modeling language, that is specifically designed to calculate neuronal systems with a high degree of reality (Ekeberg et al., 1991). Our model consisted of a motoneuron pool with 200 neurons connected to an EMG-model of the human soleus muscle and an extra group of higher-level neurons for controlling the amount of decrease of presynaptic inhibition. The model was used to simulate the observed modulation of the H-reflex with both a presynaptic and a postsynaptic mechanism. Simulations showed that a continuous change in the descending control signals is needed to make the model based on postsynaptic mechanism fit with the experimental data, whereas no extra control from the CNS over the excitatory drive to the motoneuron pool is needed when the decrease of presynaptic inhibition mechanism is applied.     

The X-ray structure of human serum ceruloplasmin at 3.1 Å: nature of the copper centres

The X-ray structure of human serum ceruloplasmin has been solved at a resolution of 3.1?Å. The structure reveals that the molecule is comprised of six plastocyanin-type domains arranged in a triangular array. There are six copper atoms; three form a trinuclear cluster sited at the interface of domains 1 and 6, and there are three mononuclear sites in domains 2, 4 and 6. Each of the mononuclear coppers is coordinated to a cysteine and two histidine residues, and those in domains 4 and 6 also coordinate to a methionine residue; in domain 2, the methionine is replaced by a leucine residue which may form van der Waals type contacts with the copper. The trinuclear centre and the mononuclear copper in domain 6 form a cluster essentially the same as that found in ascorbate oxidase, strongly suggesting an oxidase role for ceruloplasmin in the plasma.     

Identification of a locus involved in meningococcal lipopolysaccharide biosynthesis by deletion mutagenesis

A novel method for insertion/deletion mutagenesis in meningococci was devised. This consisted of ligating a digest of total chromosomal DNA to a 1.1 kb restriction fragment containing an erythromycin-resistance marker ( ermC ), and subsequent transformation of the ligation mixture into the homologous meningococcal strain H44/76. Southern blotting of a number of the resulting erythromycin-resistant transformants demonstrated that all carried the ermC gene inserted at different positions in the chromosome. Mutants with a specific phenotype were identified by screening with the anti-lipopolysaccharide (LPS) monoclonal antibody MN4A8B2, which is specific for immunotype L3. In this way, two independent L3-negative mutant strains were isolated. In transformation experiments with chromosomal DNA from these mutants, erythromycin-resistance and lack of MN4A8B2 reactivity were always linked, showing that the insertion/deletion was in a locus involved in LPS biosynthesis. On SDS–PAGE, the mutant LPS displayed an electrophoretic mobility intermediate between that produced by the previously isolated galE and rfaF mutant strains. Chemical analysis of the mutant LPS revealed that the structure was probably lipid A–(KDO)₂–(Hep)₂. Chromosomal DNA flanking the ermC insertion in these two mutant strains was cloned, and used as probe for the isolation of the corresponding region of the wild-type strain. From hybridization and polymerase chain reaction (PCR) analysis, it could be concluded that both mutations map to the same locus. The affected gene probably encodes the glycosyltransferase necessary for adding N -acetylglucosamine to heptose.     

A cyclophilin-like peptidyl-prolyl cis/trans isomerase from Legionella pneumophila – characterization, molecular cloning and overexpression

Legionella pneumophila is the causative agent of a severe form of pneumonia in humans (Legionnaires’disease). A major virulence factor, the Mip protein (FK506-binding protein, FKBP25mem), belongs to the enzyme family of peptidyl-prolyl cis/trans isomerases (PPIases). Here we show that L. pneumophila Philadelphia I possesses an additional cytoplasmic PPiase at a level of enzyme activity comparable to that of FKBP25mem. The N-terminal amino acid sequence of the purified protein was obtained by Edman degradation and showed that the protein is a member of the cyclophilin family of PPIases. The Icy gene (Legionella cycophn) was cloned and sequenced. It encodes a putative 164-amino-acid protein with a molecular mass of 17 968 Da called L. pneumophila cyclophilin 18 (L. p. Cyp18). Amino acid sequence comparison displays considerable similarity to the cytoplasmic and the periplasmic cyclophilins of Escherichia coll with 60.5% and 51.5% identity, respectively. The substrate specificity and inhibition by cyclosporin A revealed a pattern that is typically found for other bacterial cyclophilins. An L. pneumophila Cyp18 derivative with a 19-amino-acid polypeptide extension including a 6-histi-dine tag and an enterokinase cleavage site exhibits     

Non-covalent enzyme-polyelectrolyte complexes as self-buffered catalysts for use in low-water organic media

Summary When free chymotrypsin is used to catalyse hydrolysis of N-acetyl tyrosine ethyl ester in 90% acetonitrile, the reaction rate soon falls because of the accumulation of the acidic product. If the enzyme is used in the form of a suspended complex with polyacrylic acid, the polyelectrolyte acts as an acid-base buffer to permit extended reaction.