Transition from Anaerobic to Aerobic Growth Conditions for the Sulfate-Reducing Bacterium Desulfovibrio oxyclinae Results in Flocculation

A chemostat culture of the sulfate-reducing bacterium Desulfovibrio oxyclinae isolated from the oxic layer of a hypersaline cyanobacterial mat was grown anaerobically and then subjected to gassing with 1% oxygen, both at a dilution rate of 0.05 h⁻¹. The sulfate reduction rate under anaerobic conditions was 370 nmol of SO₄²⁻ mg of protein⁻¹ min⁻¹. At the onset of aerobic gassing, sulfate reduction decreased by 40%, although viable cell numbers did not decrease. After 42 h, the sulfate reduction rate returned to the level observed in the anaerobic culture. At this stage the growth yield increased by 180% compared to the anaerobic culture to 4.4 g of protein per mol of sulfate reduced. Protein content per cell increased at the same time by 40%. The oxygen consumption rate per milligram of protein measured in washed cell suspensions increased by 80%, and the thiosulfate reduction rate of the same samples increased by 29% with lactate as the electron donor. These findings indicated possible oxygen-dependent enhancement of growth. After 140 h of growth under oxygen flux, formation of cell aggregates 0.1 to 3 mm in diameter was observed. Micrometer-sized aggregates were found to form earlier, during the first hours of exposure to oxygen. The respiration rate of D. oxyclinae was sufficient to create anoxia inside clumps larger than 3 μm, while the levels of dissolved oxygen in the growth vessel were 0.7 ± 0.5 μM. Aggregation of sulfate-reducing bacteria was observed within a Microcoleus chthonoplastes-dominated layer of a cyanobacterial mat under daily exposure to oxygen concentrations of up to 900 μM. Desulfonema-like sulfate-reducing bacteria were also common in this environment along with other nonaggregated sulfate-reducing bacteria. Two-dimensional mapping of sulfate reduction showed heterogeneity of sulfate reduction activity in this oxic zone.     

Genetic variation in parthenogenetic Caucasian rock lizards of the genus Lacerta (L. dahli, L. armeniaca, L. unisexualis) analyzed by DNA fingerprinting

Multilocus DNA fingerprinting has been used to study the variability of some mini- and microsatellite sequences in parthenogenetic species of Caucasian rock lizards of the genus Lacerta (L. dahli, L. armeniaca and L. unisexualis). We demonstrate that these clonally reproducing lizards possess species-specific DNA fingerprints with a low degree of intra- and interpopulation variation. Mean indices of similarity obtained using M13 DNA, (GACA)4 and (TCC)50 as probes were 0.962 and 0.966 in L. dahli and L. armeniaca, respectively. The mean index of similarity obtained using M 13 and GATA probes in L. unisexualis was estimated to be 0.95. However, despite the high degree of band-sharing, variable DNA fragments were revealed in all populations with the microsatellite probes. An particularly high level of variability was observed for (TCC)n microsatellites in populations of L. unisexualis. In fact TCC-derived DNA fingerprints were close to being individual-specific, with a mean index of similarity of 0.824. Fingerprint analysis of parthenogenetic families of L. armeniaca showed that all maternal fragments were inherited together by the progeny, and no differences in fingerprint patterns were observed. On the other hand, while identical DNA fingerprints were obtained from L. unisexualis families with M13 and (GATA)4 probes, use of the (TCC)50 probe revealed remarkable intrafamily variation in this species. It is assumed that the genetic heterogeneity observed in parthenogenetic populations may be explained, at least in part, by the existence of genetically unstable microsatellite loci. Our data serve to illustrate processes of spontaneous mutagenesis and the initial stages of clonal differentiation in natural populations of the lizard species studied.     

Centrifugal cell hybridization

Centrifugation of cell suspensions containing two or several cell types at forces up to 2 million g results in several basic events in succession: 1. Intracellular stratification. 2. Extrusion of the most dense cell parts (nuclei or cytoplasmic components) and their penetration into an adjacent cell in the compact sediment. Such introduction of protoplasmic elements from one cell into another is considered as centrifugal hybridization and fusion of cells. It differs from other methods of cell hybridization by its selectivity for cell components. 3. Further intermingling and mixing of cells into a fused protoplasmic mass. 4. With continuing increase of centrifugal force fractions of subcellular components are formed from the protoplasmic mass. These components are presumably viable since cells are not exposed to chemical treatment. Morphological demonstration of hybridization is based on centrifuging microscopy and on labeling donor cells or recipient cells by staining or fluorescence. Genetic evidence can be provided by cultivation of hybrid cellsin vitro and their cloningin vivo.     

Enhancement of chloroplast energization in Chlorella by treatments inactivating the nitrate-reducing system

Inactivation of the nitrate-reducing system in whole cells of Chlorella vulgaris Bejerinck by darkening, nitrogen starvation, ammonium, or cycloheximide brings cells into a state with a high yield of the millisecond-delayed fluorescence of chlorophyll. Activation of this system by illumination, by adding glucose to dark-adapted cells or nitrate to nitrogen-starved cells brings the cells into a low-yield state. The transitions between the lowand high-yield state induced by alternating light and dark periods are suppressed by tungstate and restored by subsequent molybdate addition. The drop in the delayed-fluorescence yield upon activation of the nitrate-reducing system is associated with the decrease of the amplitude of the electrochemical proton gradient across the thylakoid membrane of the chloroplast, as evidenced by the kinetics of the light-induced adsorption changes at 520 nm. The decrease of the proton gradient may be caused by the electron flow diverting from the cyclic path in photosystem I as a result of the activation of the electron transfer from ferredoxin to nitrite.Abbreviation DCMU 3-(3,4-dichlorophenyl)-1,1-dimethylurea     

Whole-genome sequencing and assembly with high-throughput, short-read technologies

While recently developed short-read sequencing technologies may dramatically reduce the sequencing cost and eventually achieve the $1000 goal for re-sequencing, their limitations prevent the de novo sequencing of eukaryotic genomes with the standard shotgun sequencing protocol. We present SHRAP (SHort Read Assembly Protocol), a sequencing protocol and assembly methodology that utilizes high-throughput short-read technologies. We describe a variation on hierarchical sequencing with two crucial differences: (1) we select a clone library from the genome randomly rather than as a tiling path and (2) we sample clones from the genome at high coverage and reads from the clones at low coverage. We assume that 200 bp read lengths with a 1% error rate and inexpensive random fragment cloning on whole mammalian genomes is feasible. Our assembly methodology is based on first ordering the clones and subsequently performing read assembly in three stages: (1) local assemblies of regions significantly smaller than a clone size, (2) clone-sized assemblies of the results of stage 1, and (3) chromosome-sized assemblies. By aggressively localizing the assembly problem during the first stage, our method succeeds in assembling short, unpaired reads sampled from repetitive genomes. We tested our assembler using simulated reads from D. melanogaster and human chromosomes 1, 11, and 21, and produced assemblies with large sets of contiguous sequence and a misassembly rate comparable to other draft assemblies. Tested on D. melanogaster and the entire human genome, our clone-ordering method produces accurate maps, thereby localizing fragment assembly and enabling the parallelization of the subsequent steps of our pipeline. Thus, we have demonstrated that truly inexpensive de novo sequencing of mammalian genomes will soon be possible with high-throughput, short-read technologies using our methodology.     

以黑丝羽乌骨鸡为供体制作家鸡嵌合体的研究

以黑丝羽乌骨鸡（BS）为供体,自来航鸡（WL）为受体,进行了BCs嵌合体制作技术研究。结果表明：（1）“黑羽”对“白羽”、“丝羽”对“片羽”为完全隐性,可以在供体与嵌合体测交中,后代是否出现这些特征作为种系嵌合体判断依据。（2）供体的其它表型,对受体属于完全或不完全显性,可以作为体细胞嵌合体判断依据。（3）通过改进嵌合体制作技术,嵌合体雏鸡的出壳率为40％（29／73）,其中据羽色判断的嵌合体率为18％（13／73）;以黑羽为依据选择体细胞嵌合体雏鸡,10只饲养至720d,其中60％（6／10）的嵌合体外观基本不变（其余的换羽后褪去黑羽）;嵌合体鸡与供体测交,以黑羽、灰羽和丝羽判断,8只嵌合体鸡的种系传递率分别为2．5％-71．4％、5．5％～14．3％以及1．7％～10．5％。首次利用BS鸡资源,建立了多表现型嵌合体模型,为家鸡嵌合体技术深入研究提供了方便的检测方法。     

Population dynamics of wireworms (Coleoptera,Elateridae) in arable land after abandonment

The community of elaterid larvae of three sites (field and two fallows), representing different stages of secondary succession, were studied using soil sampling from 1986 to 1993. All three sites were abandoned arable land: a field cultivated until 1991, a fallow I abandoned in 1986, and a fallow II abandoned about 1976. The fallow II was used as a meadow after abandonment and was regularly mown until 1985, when cultivation stopped. Six species of Elateridae larvae were found at all three study sites. In the field, Agriotes obscurus, Athous niger, Athous subsuscus, Dalopius marginatus and Athous vittatus were found, A. niger and A. obscurus being the most abundant species. During cultivation, larval densities were very low, however, larval abundance increased up to 8.8 ± 8.3 ind. m^-2 when cultivation stopped. Only small A. obscurus larvae were found during cultivation, whereas larval size increased after abandonment. In fallow I A. obscurus, A. niger, A. subsuscus, D. marginatus, and Agrypnus murinus were found and the average annual abundance fluctuated between 0.8 ± 1.4 to 40.8 ± 10.9 ind. m^-2 with A. obscurus being the most abundant species. Fallow II supported the highest densities of wireworms from all plots studied (71.2±35.2 to 280.0±24.8 ind. m^-2). A. obscurus, A. niger, A. subsuscus and D. marginatus were found in fallow II. The abundance of all larval Elateridae as well as the dominant species A. obscurus decreased during the study period, while simultaneously the occurrence of small sized A. obscurus larvae decreased. The frequency of cultivation and time elapsed since last cultivation appeared to be the most important factors affecting elaterid occurrence in the field and fallow I. In fallow II, the decrease in abundance correlates with the accumulation of a dense litter layer, which may correspond with soil surface structure, plant community changes or predator pressure.     

Stretched DNA Investigated Using Molecular-Dynamics and Quantum-Mechanical Calculations

We combined atomistic molecular-dynamics simulations with quantum-mechanical calculations to investigate the sequence dependence of the stretching behavior of duplex DNA. Our combined quantum-mechanical/molecular-mechanical approach demonstrates that molecular-mechanical force fields are able to describe both the backbone and base-base interactions within the highly distorted nucleic acid structures produced by stretching the DNA from the 5′ ends, which include conformations containing disassociated basepairs, just as well as these force fields describe relaxed DNA conformations. The molecular-dynamics simulations indicate that the force-induced melting pathway is sequence-dependent and is influenced by the availability of noncanonical hydrogen-bond interactions that can assist the disassociation of the DNA basepairs. The biological implications of these results are discussed.