The Teorell membrane oscillator as a mechano-electric transducer

Summary The results of a recent quantitative analysis of the Teorell membrane oscillator are utilized to explore its role as an excitability analogue. Special attention is paid to its role as a mechano-electric transducer. A membrane of exceptionally well-defined pore structure has been used in this study. The analogue properties arise from nonlinear coupling between water and salt fluxes. When the membrane is simultaneously subjected to controlled gradients of hydrostatic pressure, electrical potential and concentration, bi-stable stationary states can be produced. These arise from the opposing effects of pressure and electro-osmosis on the volume flow. Transitions between these states show hysteresis. The factors governing such transitions are analogous to certain types of stimuli encountered in the natural excitation process. The membrane system also shows oscillatory behavior when the hydrostatic pressure gradient is allowed to vary under constant current conditions. This property is related to the bi-stable stationary state phenomena and is compared to the regenerative behavior found in biologically excitable tissues. Particular emphasis is placed upon analogies between the membrane oscillator and certain natural tissues. The importance of the nonlinear nature of the force-flux coupling in the analogue is stressed, and its possible relevance to biological excitability indicated. Some consideration is also given to the role of electro-osmotic flux coupling in biological tissues.     

Decreased expression of J11d antigen during monocytic differentiation of M1 myeloid leukemic cells.

Four myeloid cell lines (M1, WEHI-3B D+, FDC-P1, and 32D) were screened for the presence of J11d antigen. One of these cell lines, the myeloid leukemia M1, was found to express a high level of J11d antigen on the cell surface. Recombinant mouse leukemic inhibitory factor (rm-LIF), recombinant human LIF (rh-LIF), and steroids (hydrocortisone and dexamethasone) could induce M1 cells to undergo monocytic differentiation. The level of J11d antigen was greatly reduced after treatment of the cells with LIF or steroids. Western blotting revealed that the apparent molecular weight of the J11d antigen on M1 cells was 45-48 kDa. Furthermore, the level of J11d mRNA was also reduced during LIF-induced differentiation of M1 cells.     

Vitronectin and its fragments purified as serum inhibitors of Staphylococcus aureus gamma-hemolysin and leukocidin, and their specific binding to the hlg2 and the LukS components of the toxins.

Staphylococcal gamma-hemolysin and leukocidin are bi-component cytolysins, consisting of LukF (or Hlg1)/Hlg2 and LukF/LukS, respectively. Here, we purified serum inhibitors of gamma-hemolysin and leukocidin from human plasma. Protein sequencing showed that the purified inhibitors of 62, 57, 50 and 38 kDa were the vitronectin fragments with truncation(s) of the C-terminal or both N- and C-terminal regions. The purified vitronectin fragments specifically bound to the Hlg2 component of gamma-hemolysin and the LukS component of leukocidin to form high-molecular-weight complexes with them, leading to inhibition of the toxin-induced lysis of human erythrocytes and human polymorphonuclear leukocytes, respectively. Intact vitronectin also showed inhibitory activity to the toxins. The ability of gamma-hemolysin and leukocidin to bind vitronectin and its fragments is a novel function of the pore-forming cytolysins.     

Vertical distribution of zooplankton in the frontal zone of the Gulf Stream and Labrador Current

Zooplankton data collected during September 1995 in the NorthWest Atlantic at 4139'N, 4958'W (the location of the siteof the ‘Titanic’ wreck) were analysed. The regioninvestigated was characterized by a very sharp frontal zonebetween the Gulf Stream and the main stream of the LabradorCurrent. The total plankton biomass in the water column wasvery high. The macroplankton biomass values below the 600 mlayer were significantly higher as compared with the similarvalues measured before in other productive boreal regions ofthe Atlantic and Pacific oceans. A lot of dead mesoplanktonanimals occurred in the deep layers. The reason was that thecold-water mesoplankton advected by the Labrador Current diedoff intensively within the deep layers of the frontal zone andwere used as a food resource by the macroplankton carnivoresand scavengers that were very abundant there.     

A finite element based method to determine the properties of planar soft tissue.

A finite element based method to determine the incremental elastic material properties of planar membranes was developed and evaluated. The method is applicable to tissues that exhibit inhomogeneity, geometric and material nonlinearity, and anisotropy. Markers are placed on the tissue to form a four-node quadrilateral element. The specimen is loaded to an initial reference state, then three incremental loading sets are applied and the nodal displacements recorded. One of these loadings must include shear. These data are used to solve an over-determined system of equations for the tangent stiffness matrix. The method was first verified using analytical data. Next, data obtained from a latex rubber sheet were used to evaluate experimental procedures. Finally, experiments conducted on preconditioned rat skin revealed nonlinear orthotropic behavior. The vector norm comparing the applied and calculated nodal force vectors was used to evaluate the accuracy of the solutions.     

An implantable transducer for measuring tension in an anterior cruciate ligament graft.

The goal of this study was to develop a new implantable transducer for measuring anterior cruciate ligament (ACL) graft tension postoperatively in patients who have undergone ACL reconstructive surgery. A unique approach was taken of integrating the transducer into a femoral fixation device. To devise a practical in vivo calibration protocol for the fixation device transducer (FDT), several hypotheses were investigated: (1) The use of a cable versus the actual graft as the means for applying load to the FDT during calibration has no significant effect on the accuracy of the FDT tension measurements; (2) the number of flexion angles at which the device is calibrated has no significant effect on the accuracy of the FDT measurements; (3) the friction between the graft and femoral tunnel has no significant effect on measurement accuracy. To provide data for testing these hypotheses, the FDT was first calibrated with both a cable and a graft over the full range of flexion. Then graft tension was measured simultaneously with both the FDT on the femoral side and load cells, which were connected to the graft on the tibial side, as five cadaver knees were loaded externally. Measurements were made with both standard and overdrilled tunnels. The error in the FDT tension measurements was the difference between the graft tension measured by the FDT and the load cells. Results of the statistical analyses showed that neither the means of applying the calibration load, the number of flexion angles used for calibration, nor the tunnel size had a significant effect on the accuracy of the FDT. Thus a cable may be used instead of the graft to transmit loads to the FDT during calibration, thus simplifying the procedure. Accurate calibration requires data from just three flexion angles of 0, 45, and 90 deg and a curve fit to obtain a calibration curve over a continuous range of flexion within the limits of this angle group. Since friction did not adversely affect the measurement accuracy of the FDT, the femoral tunnel can be drilled to match the diameter of the graft and does not need to be overdrilled. Following these procedures, the error in measuring graft tension with the FDT averages less than 10 percent relative to a full-scale load of 257 N.