Increased Expression of MERTK is Associated with a Unique Form of Canine Retinopathy

Progressive retinal degenerations are among the most common causes of blindness both in human and in dogs. Canine progressive retinal atrophy (PRA) resembles human retinitis pigmentosa (RP) and is typically characterized by a progressive loss of rod photoreceptors followed by a loss of cone function. The disease gradually progress from the loss of night and day vision to a complete blindness. We have recently described a unique form of retinopathy characterized by the multifocal gray/brown discoloration and thinning of the retina in the Swedish Vallhund (SV) breed. We aimed to identify the genetic cause by performing a genome wide association analysis in a cohort of 18 affected and 10 healthy control dogs using Illumina''s canine 22k SNP array. We mapped the disease to canine chromosome 17 (p = 7.7×10⁻⁵) and found a 6.1 Mb shared homozygous region in the affected dogs. A combined analysis of the GWAS and replication data with additional 60 dogs confirmed the association (p = 4.3×10⁻⁸, OR = 11.2 for homozygosity). A targeted resequencing of the entire associated region in four cases and four controls with opposite risk haplotypes identified several variants in the coding region of functional candidate genes, such as a known retinopathy gene, MERTK. However, none of the identified coding variants followed a compelling case- or breed-specific segregation pattern. The expression analyses of four candidate genes in the region, MERTK, NPHP1, ANAPC1 and KRCC1, revealed specific upregulation of MERTK in the retina of the affected dogs. Collectively, these results indicate that the retinopathy is associated with overexpression of MERTK, however further investigation is needed to discover the regulatory mutation for the better understanding of the disease pathogenesis. Our study establishes a novel gain-of-function model for the MERTK biology and provides a therapy model for retinopathy MERTK inhibitors. Meanwhile, a marker-based genetic counseling can be developed to revise breeding programs.     

Effects of Spray Drying on Physicochemical Properties of Chitosan Acid Salts

The effects of spray-drying process and acidic solvent system on physicochemical properties of chitosan salts were investigated. Chitosan used in spray dryings was obtained by deacetylation of chitin from lobster (Panulirus argus) origin. The chitosan acid salts were prepared in a laboratory-scale spray drier, and organic acetic acid, lactic acid, and citric acid were used as solvents in the process. The physicochemical properties of chitosan salts were investigated by means of solid-state CP-MAS ¹³C nuclear magnetic resonance (NMR), X-ray powder diffraction (XRPD), differential scanning calorimetry, and Fourier transform infrared spectrometry (FTIR) and near-infrared spectroscopy. The morphology of spray-dried chitosan acid salts showed tendency toward higher sphericity when higher temperatures in a spray-drying process were applied. Analysis by XRPD indicated that all chitosan acid salts studied were amorphous solids. Solid-state ¹³C NMR spectra revealed the evidence of the partial conversion of chitosan acetate to chitin and also conversion to acetyl amide form which appears to be dependent on the spray-drying process. The FTIR spectra suggested that the organic acids applied in spray drying may interact with chitosan at the position of amino groups to form chitosan salts. With all three chitosan acid salts, the FTIR bands at 1,597 and 1,615 cm⁻¹ were diminished suggesting that –NH groups are protonated. The FTIR spectra of all chitosan acid salts exhibited ammonium and carboxylate bands at 1,630 and 1,556 cm⁻¹, respectively. In conclusion, spray drying is a potential method of preparing acid salts from chitosan obtained by deacetylation of chitin from lobster (P. argus) origin.     

Direct Compression of Cellulose and Lignin Isolated by a New Catalytic Treatment

Tablet compression of softwood cellulose and lignin prepared by a new catalytic oxidation and acid precipitation method were investigated and compared with the established pharmaceutical direct compression excipients. Catalytic pretreated softwood cellulose (CPSC) and lignin (CPSL) were isolated from pine wood (Pinus sylvestris). The compaction studies were carried out with an instrumented eccentric tablet machine. The plasticity and elasticity of the materials under compression were evaluated using force-displacement treatment and by determining characteristic plasticity (PF) and elasticity (EF) factors. With all biomaterials studied, the PF under compression decreased exponentially as the compression force increased. The compression force applied in tablet compression did not significantly affect the elasticity of CPSC and microcrystalline cellulose (MCC) while the EF values for softwood lignins increased as compression force increased. CPSL was clearly a less plastically deforming and less compactable material than the two celluloses (CPSC and MCC) and hardwood lignin. CPSL presented deformation and compaction behaviour almost identical to that of lactose monohydrate. In conclusion, the direct tablet compression behaviour of native lignins and celluloses can greatly differ from each other depending on the source and isolation method used.     

Press discourses on Roma in the UK,Finland and Hungary

ABSTRACT

This article analyses the political and media discourses on Roma in Hungary, Finland and the UK, in relation to the local Roma in these countries as well as those who migrated from Central and Eastern Europe countries following the fall of communism. The authors have analysed left of centre and right of centre major newspapers in these three countries, focusing on specific case studies which were the foci of public debates during the last two decades. We also examined a common case study in 2013 (“blond Maria”) that was discussed throughout Europe. In each news paper, the constructions of Roma, local and migrant, and the changes to related discourses over the period were studied. In conclusion, we examine the multi-layered processes of social and political borderings in Europe which dominate discourses on Roma, “indigenous” and migrant, and the extent to which they constitute a coherent “European” construction of “the Roma”.     

Particle Size, Moisture, and Fluidization Variations Described by Indirect In-line Physical Measurements of Fluid Bed Granulation

The aim of this study was to evaluate an instrumentation system for a bench scale fluid bed granulator to determine the parameters expressing the changing conditions during the spraying phase of a fluid bed process. The study focused mainly on four in-line measurements (dependent variables): fluidization parameter (calculated by inlet air flow rate and rotor speed), pressure difference over the upper filters, pressure difference over the granules (lower filter), and temperature of the fluidizing mass. In-line particle size measured by the spatial filtering technique was an essential predictor variable. Other physical process measurements of the automated granulation system, 25 direct and 12 derived parameters, were also utilized for multivariate modeling. The correlation and partial least squares analyses revealed significant relationships between various process parameters highlighting the particle size, moisture, and fluidization effect. Fluidization parameter and pressure difference over upper filters were found to correlate with in-line particle size and therefore could be used as estimates of particle size during granulation. The pressure difference over the granules and the temperature of the fluidizing mass expressed the moisture conditions of wet granulation. The instrumentation system evaluated here is an invaluable aid to gaining more control for fluid bed processing to obtain repeatable granules for further processing.     

A New Rapid On-Line Imaging Method to Determine Particle Size Distribution of Granules

The purpose of this research was to study the feasibility of the new image analysis method in the particle size determination of the granules. The method is capable of forming a three-dimensional topographic image of a sample surface from a digital picture. In the method, a flat granule bed surface was illuminated from three different directions, using the three primary colors (red, green, and blue). One color picture was taken by a digital camera, after which a topographic image of the object surface was constructed. The particle size distribution was then calculated from the image data. The particle size analysis method was tested both off-line and on-line. Off-line particle size measurement results determined by the image analysis method corresponded quite well to those of sieve analysis in the size fraction range 250–1,000 μm. In on-line application, images were successfully retrieved and median granule size trend could be calculated and followed during fluid bed granulations.     

Salmon cardiac natriuretic peptide is a volume-regulating hormone

The present study tested the hypothesis that salmon cardiac peptide (sCP), a new member of the family of natriuretic peptides, has an important role in the regulation of fluid balance and cardiovascular function. Intra-arterial administration of sCP increased urine output in salmon. It had a diuretic effect in rat as well, but the potency was lower. sCP increased the sodium excretion in proportion to the increased urine flow. Blood pressure was not affected by sCP in either species. Acute volume expansion elevated the plasma level of sCP in salmon, and an acute transfer of salmon from fresh to sea water decreased the circulating sCP level. Cardiac immunoreactive sCP or sCP mRNA levels were not affected by transfer to sea water. These results indicate that sCP has an important physiological role in defending salmon against volume overload but that it does not appear to contribute to the short-term regulation of blood pressure. sCP provides an excellent model of the general mechanisms of regulation of the A-type (atrial) natriuretic peptide system.     

Population genetic structure of male black grouse (Tetrao tetrix L.) in fragmented vs. continuous landscapes

We investigated the association of habitat fragmentation with genetic structure of male black grouse Tetrao tetrix. Using 14 microsatellites, we compared the genetic differentiation of males among nine localities in continuous lowland habitats in Finland to the genetic differentiation among 14 localities in fragmented habitats in the Alps (France, Switzerland and Italy). In both areas, we found significant genetic differentiation. However, the average differentiation, measured as theta, was more than three times higher in the Alps than in Finland. The greater differentiation found in the Alps is probably due to the presence of mountain ridges rising above natural habitats of the species, which form barriers to gene flow, and to a higher influence of genetic drift resulting from lower effective sizes in highly fragmented habitats. The detection of isolation by distance in the Alps suggests that gene flow among populations does occur. The genetic variability measured as gene diversity HE and allelic richness A was lower in the Alps than in Finland. This could result from the higher fragmentation and/or from the fact that populations in the Alps are isolated from the main species range and have a lower effective size than in Finland. This study suggests that habitat fragmentation can affect genetic structure of avian species with relatively high dispersal propensities.     

Über den Einfluss des elektrischen Stromes auf die Plasmapermeabilität pflanzlicher Zellen

Zusammenfassung Zellen vonChara ceratophylla, die in Lösungen von hochdispersen Sulfosäurefarbstoffen liegend mit elektrischen Strömen durchströmt wurden, zeigten keine Farbstoffaufnahme, ehe die Zellen irreversibel beschädigt waren. Ebenso wenig fand eine wahrnehmbare Exosmose von Cl-Ionen aus unbeschädigtenChara-Zellen statt, wenn die Zellen in einer chloridfreien Nitratlösung durchströmt wurden. An dem untersuchten, für derartige Versuche sehr günstigen Objekt konnte somit keine reversible Permeabilitätssteigerung durch elektrische Ströme bewirkt werden.