Design and physical characteristics of a multistage,continuous tower fermentor

A multistage tower laboratory fermentor has been constructed consisting of eight compartments separated by sieve plates. Flow of substrate and air is concurrent from the bottom to the top of the column. It, was hoped that this system could be used to reproduce, simultaneously on a continuous basis, eight distinct phases of a batch growth curve. It was believed that the extent of batch curve simulation would depend upon the character of hydraulic mean residence time of broth in the column and in the individual compartments. The expected relationship did not occur. Rather it was found that growth in the column involved residence time characteristics not only for the fluid but also for the microorganisms, and for the growth limiting substrate. Depending upon the column operation, these could be distinct and different. The purpose of this investigation was to study the residence time distribution (RTD) of the continous (fluid) and dispersed (microorganisms) phases for model systems as well as for a yeast fermentation. Various degrees of flow nonideality, i.e., fluid blackflow and dispersed phase sedimentation, were noticed. The former seems to be due to interaction of the concurrent gas and liquid flow; it is particularly dependent upon void area of the sieve plate holes. Sedimentation is probably a function of plate design as well as cell size and density. It wa concluded that for a particular plate design the gas hold-up wass controlled by superficial air velocity and was the main parameter governing the differences between dispersed and continous phase(Rt1). This conclusion was supported by a computeraided styudy utilizing a mathematical model of fluid flow to fit the growth kinetics and cell distribution observed experimentally throughout the fermentor. Some advantages of foam control in the tower fermentor by surface active compounds are mentioned. Also, suggestions are made for carrying out fermentations that have two liquid phases, such as a hydrocarbon fermentation. The possibility of closely approximating plug-flow conditions in the multistage tower fermentor, a necessary condition for batch growth simulation, is discussed from a practical point of view.     

Modulation of actin mRNAs in cultured vascular cells by matrix components and TGF-β1

Summary Alpha-smooth muscle actin is currently considered a marker of smooth muscle cell differentiation. However, during various physiologic and pathologic conditions, it can be expressed, sometimes only transiently, in a variety of other cell types, such as cardiac and skeletal muscle cells, as well as in nonmuscle cells. In this report, the expression of actin mRNAs in cultured rat capillary endothelial cells (RFCs) and aortic smooth muscle cells (SMCs) has been studied by Northern hybridization in two-dimensional cultures seeded on individual extracellular matrix proteins and in three-dimensional type I collagen gels. In two-dimensional cultures, in addition to cytoplasmic actin mRNAs which are normally found in endothelial cell populations, RFCs expressed α-smooth muscle (SM) actin mRNA at low levels. α-SM actin mRNA expression is dramatically enhanced by TGF-β₁. In addition, double immunofluorescence staining with anti-vWF and anti-α-SM-1 (a monoclonal antibody to α-SM actin) shows that RFCs co-express the two proteins. In three dimensional cultures, RFCs still expressed vWF, but lost staining for α-SM actin, whereas α-SM actin mRNA became barely detectable. In contrast to two-dimensional cultures, the addition of TGF-β₁ to the culture media did not enhance α-SM actin mRNA in three-dimensional cultures, whereas it induced rapid capillary tube formation. Actin mRNA expression was modulated in SMCs by extracellular matrix components and TGF-β₁ with a pattern very different from that of RFCs. Namely, the comparison of RFCs with other cell types such as bovine aortic endothelial cells shows that co-expression of endothelial and smooth muscle cell markers is very unique to RFCs and occurs only in particular culture conditions. This could be related to the capacity of these microvascular endothelial cells to modulate their phenotype in physiologic and pathologic conditions, particularly during angiogenesis, and could reflect different embryologic origins for endothelial cell populations. Supported by a Post-Doctoral Fellowship from the Swiss National Science Foundation (OK) and grant HL-RO1-28373 (JAM) from the Department of Human Services, Public Health Service, Washington, D.C.     

Genetic studies on the acidification capacity of sunflower roots induced under iron stress

Under stress of iron deficiency roots of sunflower (Helianthus annuus L.) increase proton efflux which acidifies the root medium, increase the ferric reducing capacity and the exudation of phenolic compounds. Differences have been found previously among sunflower inbred lines in the capacity of their roots to lower pH and it was also found that this character is under genetic control.This work presents the results of an inheritance study made by crossing two genotypes, one (CMS HA 89) without acidification capacity and another (RHA 271) with it. Plants were grown individually in 75 mL vessels with an aerated solution low in iron. After 4 days, solutions were changed to one without iron and the pH of the medium was measured during the following days. Results from F₁, F₂, and backcross generations can be explained with two pairs of alleles controlling the character, being the relation between alleles of complete dominance at both gene pairs, but either gene, when dominant is epistatic to the other.     

Regulation of the 3 beta-hydroxysteroid dehydrogenase activity in tissue fragments and microsomes from human term placenta: kinetic analysis and inhibition by steroids

The effects of 50 microM of progesterone (P4), estradiol (E2), estrone (E1), estriol (E3), dehydroepiandrosterone (DHIA), androstenedione (delta 4) and testosterone (T) on the bioconversion of [3H]pregnenolone (6 nM) to [3H]P4 were investigated by incubating 200 mg of tissue fragments as well as equivalent aliquots of microsomes from human term placenta during 30 min. All the steroids assayed, except E3, significantly inhibited the [3H]P4 formation in a microsome incubation system with respect to the control assay (P less than 0.001). Conversely in a tissue incubation system. P4, E1 as well as E3 had no effect on [3H]pregnenolone bioconversion while E2 slightly decreased the [3H]P4 formation (P less than 0.05) compared with the control. A significant inhibition was observed in this system with the other steroids (P less than 0.001). To investigate these apparent different results of inhibition-noninhibition of the same steroids irrespective of the system of incubation used, the effects of P4, E2 and T on 3 beta-hydroxysteroid dehydrogenase/isomerase (3 beta-HSD) activity were studied in tissue fragments and microsomes in kinetic terms. The results found indicate that these steroids inhibited in a competitive fashion the 3 beta-HSD activity in both systems. The different Ki values found in tissue fragments and microsomes respectively for P4 (1.8 microM vs 0.5 microM), E2 (2.3 microM vs 0.6 microM) and T (0.25 microM vs 0.3 microM) explain the bioconversion results obtained in presence of 50 microM of the same steroids. These results include inhibition of [3H]P4 formation by T in tissue fragments as well as in microsomes whereas P4 and E2 inhibited the [3H]P4 formation only in microsomes. Furthermore, the comparison of these Ki values with the available data of intraplacental and circulating concentrations of the same steroids in human term pregnancy suggest that only P4 would be expected to cause marked 3 beta-HSD inhibition in physiological conditions.     

Internal protein sequence analysis: enzymatic digestion for less than 10 micrograms of protein bound to polyvinylidene difluoride or nitrocellulose membranes.

A procedure for the generation and isolation of internal peptide fragments for less than 10 micrograms of protein bound to either polyvinylidene difluoride (PVDF) or nitrocellulose membranes after electrophoretic transfer from sodium dodecyl sulfate-polyacrylamide gels (SDS-PAGE) is presented. This technique has produced internal sequence data for 120 peptides, with an average initial yield of 20 pmol. Membrane-bound proteins were enzymatically digested with either trypsin or endoproteinase Lys-C in the presence of 1% hydrogenated Triton X-100/10% acetonitrile/100 mM Tris-HCl, pH 8.0, for 24 h at 37 degrees C. The eluted peptides were then directly isolated by microbore HPLC for subsequent sequence analysis. One percent hydrogenated Triton X-100 did not inhibit enzymatic activity, distort HPLC resolution of peptides, or contain uv-absorbing contaminants that could interfere with peptide identification. Reproducible peptide maps and consistent recoveries are presented for standard proteins (3.5-8.0 micrograms) bound to either membrane, with higher recoveries for PVDF-bound proteins. Ninety percent of the proteins analyzed by this technique have produced results; representative peptide maps and sequence data are presented. This technique has a wide range of applications, particularly for proteins with blocked amino termini or those that can only be purified by SDS-PAGE or 2D isoelectric focusing SDS-PAGE.