Selective production of two diastereomers of disaccharide sugar alcohol, mannosylerythritol by Pseudozyma yeasts

Mannosylerythritol (ME) is the hydrophilic backbone of mannosylerythritol lipids as the most promising biosurfactants produced by different Pseudozyma yeasts, and has been receiving attention as a new sugar alcohol. Different Pseudozyma yeasts were examined for the sugar alcohol production using glucose as the sole carbon source. P. hubeiensis KM-59 highly produced a conventional type of ME, i.e., 4-O-β-d-mannopyranosyl-d-erythritol (4-ME). Interestingly, P. tsukubaensis KM-160 produced a diastereomer of 4-ME, i.e., 1-O-β-d-mannopyranosyl-d-erythritol (1-ME). In shake flask culture with 200 g/l of glucose, strain KM-59 produced 4-ME at a yield of 33.2 g/l (2.2 g/l/day of the productivity), while strain KM-160 produced 1-ME at 30.0 g/l (2.0 g/l/day). Moreover, the two strains were found to produce ME from glycerol; the maximum yields of 4-ME and 1-ME from 200 g/l of glycerol were 16.1 g/l (1.1 g/l/day) and 15.8 g/l (1.1 g/l/day), respectively. The production of 1-ME as the new diastereomer was further investigated in fed batch culture using a 5-l jar-fermenter. Compared to the flask culture, strain KM-160 gave three times higher productivity of 1-ME at 38.0 g/l (6.3 g/l/day) from glucose and at 31.1 g/l (3.5 g/l/day) from glycerol, respectively. This is the first report on the selective production of two diastereomers of ME, and should thus facilitate the functional development and application of the disaccharide sugar alcohol in the food and relative industries.     

Dietary flavonoid apigenin is a potential inducer of intracellular oxidative stress: the role in the interruptive apoptotic signal

Apigenin is a representative dietary flavone (2-phenyl-4H-1-benzopyran-4-one) inhibiting cancer cell growth both in cell culture systems and in vivo. The prooxidant potential of apigenin was confirmed by the observations using flowcytometric and immunoblotting techniques that the intracellular accumulations of reactive oxygen species (ROS) and protein carbonyls were detected in the cells treated with apigenin in a dose-dependent manner. Conversely, chrysin (5,7-dihydroxyflavone) did not show any prooxidant effect. A structure-activity relationship data thus indicated that a 4'-monohydroxyl group, which can be oxidized to semiquinone radical but not up to quinone-like metabolite, is essential for prooxidant effect. When HL-60 cells were treated with not only a heme synthesis inhibitor succinyl acetone (SA) but also myeloperoxidase (MPO) inhibitors, the ROS level enhanced by apigenin was significantly reduced. The gathered data suggested that peroxidase-catalyzed production of apigenin B-ring phenoxyl radicals might be responsible for the prooxidant effect. This is supported by the observation that MPO is able to catalyze production of apigenin phenoxyl radicals, detected by an electron spin resonance-spin trapping technique. We also reveal that both SA and alpha-tocopherol enhance cellular susceptibility to apoptosis-inducing stimuli by apigenin. In conclusion, the prooxidant effect of apigenin is likely to oxidize a variety of thiols through the formation of phenoxyl radicals and thus seems to play a significant role in the abortive apoptotic pathway switching to necrotic cell death.     

Structural analysis of an acidic, fatty acid ester-bonded extracellular polysaccharide produced by a pristane-assimilating marine bacterium, Rhodococcus erythropolis PR4

Rhodococcus erythropolis PR4 is a marine bacterium that can degrade various alkanes including pristane, a C(19) branched alkane. This strain produces a large quantity of extracellular polysaccharides, which are assumed to play an important role in the hydrocarbon tolerance of this bacterium. The strain produced two acidic extracellular polysaccharides, FR1 and FR2, and the latter showed emulsifying activity toward clove oil, whereas the former did not. FR2 was composed of D-galactose, D-glucose, D-mannose, D-glucuronic acid, and pyruvic acid at a molar ratio of 1:1:1:1:1, and contained 2.9% (w/w) stearic acid and 4.3% (w/w) palmitic acid attached via ester bonds. Therefore, we designated FR2 as a PR4 fatty acid-containing extracellular polysaccharide or FACEPS. The chemical structure of the PR4 FACEPS polysaccharide chain was determined by 1D (1)H and (13)C NMR spectroscopies as well as by 2D DQF-COSY, TOCSY, HMQC, HMBC, and NOESY experiments. The sugar chain of PR4 FACEPS was shown to consist of tetrasaccharide repeating units having the following structure: [structure: see text].     

Intracellular accumulation of mannosylerythritol lipids as storage materials by Candida antarctica

Summary Candida antarctica strain T-34, which was isolated as a biosurfactant producer, was found to produce organic acids and polyols extracellularly but not to produce biosurfactants, when grown on glucose or other carbohydrates as the sole carbon source. It was also observed microscopically that the strain contained oil globules within the cells. The intracellular lipids of the strain mainly consisted of triglycerides and mannosylerythritol lipids (MEL). The MEL content of the cells during the culture exceeded 10% of the dry cell weight, and the pattern of variation of the MEL content was very similar to that of triglycerides. All three stock strains of C. antarctica tested also accumulated a relatively large amount of MEL from glucose. These results suggested that these strains accumulated the MEL intracellularly as one of the storage materials together with triglycerides.Offprint requests to: D. Kitamoto     

Adenine depurination and inactivation of plant ribosomes by an antiviral protein of Mirabilis jalapa (MAP)

Mirabilis antiviral protein (MAP) is a single-chain ribosome-inactivating protein (RIP) isolated from Mirabilis jalapa L. It depurinates the 28S-like rRNAs of prokaryotes and eukaryotes. A specific modification in the 25S rRNA of M. jalapa was found to occur during isolation of ribosomes by polyacrylamide/agarose composite gel electrophoresis. Primer extension analysis revealed the modification site to be at the adenine residue corresponding to A⁴³²⁴ in rat 28S rRNA. The amount of endogenous MAP seemed to be sufficient to inactivate most of the homologous ribosomes. The adenine of wheat ribosomes was also found to be removed to some extent by an endogenous RIP (tritin). However, the amount of endogenous tritin seemed to be insufficient for quantitative depurination of the homologous ribosomes.Endogenous MAP could shut down the protein synthesis of its own cells when it spreads into the cytoplasm through breaks of the cells. Therefore, we speculate that MAP is a defensive agent to induce viral resistance through the suicide of its own cells.     

Phospholipase D family member 4, a transmembrane glycoprotein with no phospholipase D activity, expression in spleen and early postnatal microglia

Background

Phospholipase D (PLD) catalyzes conversion of phosphatidylcholine into choline and phosphatidic acid, leading to a variety of intracellular signal transduction events. Two classical PLDs, PLD1 and PLD2, contain phosphatidylinositide-binding PX and PH domains and two conserved His-x-Lys-(x)₄-Asp (HKD) motifs, which are critical for PLD activity. PLD4 officially belongs to the PLD family, because it possesses two HKD motifs. However, it lacks PX and PH domains and has a putative transmembrane domain instead. Nevertheless, little is known regarding expression, structure, and function of PLD4.

Methodology/Principal Findings

PLD4 was analyzed in terms of expression, structure, and function. Expression was analyzed in developing mouse brains and non-neuronal tissues using microarray, in situ hybridization, immunohistochemistry, and immunocytochemistry. Structure was evaluated using bioinformatics analysis of protein domains, biochemical analyses of transmembrane property, and enzymatic deglycosylation. PLD activity was examined by choline release and transphosphatidylation assays. Results demonstrated low to modest, but characteristic, PLD4 mRNA expression in a subset of cells preferentially localized around white matter regions, including the corpus callosum and cerebellar white matter, during the first postnatal week. These PLD4 mRNA-expressing cells were identified as Iba1-positive microglia. In non-neuronal tissues, PLD4 mRNA expression was widespread, but predominantly distributed in the spleen. Intense PLD4 expression was detected around the marginal zone of the splenic red pulp, and splenic PLD4 protein recovered from subcellular membrane fractions was highly N-glycosylated. PLD4 was heterologously expressed in cell lines and localized in the endoplasmic reticulum and Golgi apparatus. Moreover, heterologously expressed PLD4 proteins did not exhibit PLD enzymatic activity.

Conclusions/Significance

Results showed that PLD4 is a non-PLD, HKD motif-carrying, transmembrane glycoprotein localized in the endoplasmic reticulum and Golgi apparatus. The spatiotemporally restricted expression patterns suggested that PLD4 might play a role in common function(s) among microglia during early postnatal brain development and splenic marginal zone cells.     

Inactivation of Escherichia coli Endotoxin by Soft Hydrothermal Processing

Bacterial endotoxins, also known as lipopolysaccharides, are a fever-producing by-product of gram-negative bacteria commonly known as pyrogens. It is essential to remove endotoxins from parenteral preparations since they have multiple injurious biological activities. Because of their strong heat resistance (e.g., requiring dry-heat sterilization at 250°C for 30 min) and the formation of various supramolecular aggregates, depyrogenation is more difficult than sterilization. We report here that soft hydrothermal processing, which has many advantages in safety and cost efficiency, is sufficient to assure complete depyrogenation by the inactivation of endotoxins. The endotoxin concentration in a sample was measured by using a chromogenic limulus method with an endotoxin-specific limulus reagent. The endotoxin concentration was calculated from a standard curve obtained using a serial dilution of a standard solution. We show that endotoxins were completely inactivated by soft hydrothermal processing at 130°C for 60 min or at 140°C for 30 min in the presence of a high steam saturation ratio or with a flow system. Moreover, it is easy to remove endotoxins from water by soft hydrothermal processing similarly at 130°C for 60 min or at 140°C for 30 min, without any requirement for ultrafiltration, nonselective adsorption with a hydrophobic adsorbent, or an anion exchanger. These findings indicate that soft hydrothermal processing, applied in the presence of a high steam saturation ratio or with a flow system, can inactivate endotoxins and may be useful for the depyrogenation of parenterals, including end products and medical devices that cannot be exposed to the high temperatures of dry heat treatments.Endotoxins are lipopolysaccharides (LPS) that are derived from the cell membranes of gram-negative bacteria and are continuously released into the environment. The release of LPS occurs not only upon cell death but also during growth and division. In the pharmaceutical industry, it is essential to remove endotoxins from parenteral preparations since they have multiple injurious biological activities, including pyrogenicity, lethality, Schwartzman reactivity, adjuvant activity, and macrophage activation (2, 9, 12, 13, 25, 32). Endotoxins are very stable molecules that are capable of resisting extreme temperatures and pH values (3, 16, 17, 29, 30, 34, 38). An endotoxin monomer has a molar mass of 10 to 20 kDa and forms supramolecular aggregates in aqueous solutions (22, 39) due to its amphipathic structure, which makes depyrogenation more difficult than sterilization. Endotoxins are not efficiently inactivated with the regular heat sterilization procedures recommended by the Japanese Pharmacopoeia. These procedures are steam heat treatment at 121°C for 20 min or dry-heat treatment for at least 1 h at 180°C. It is well accepted that only dry-heat treatment is efficient in destroying endotoxins (3, 16, 29, 30) and that endotoxins can be inactivated when exposed to a temperature of 250°C for more than 30 min or 180°C for more than 3 h (14, 36). In the production of parenterals, it is necessary to both depyrogenate the final products and carry out sterilization to avoid bacterial contamination.Several studies have examined dry-heat treatment, which is a very efficient means to degrade endotoxins (6, 20, 21, 26, 41, 42). However, its application is restricted to steel and glass implements that can tolerate high temperatures of >250°C. For sterilization, dry heat treatment tends to be used only with thermostable materials that cannot be sterilized by steam heat treatment (autoclaving). Alternative depyrogenation processes include the application of activated carbon (35), oxidation (15), and acidic or alkaline reagents (27), but steam heat treatment would be an attractive option if it were sufficiently effective. However, the data on the inactivation of endotoxins by steam heat treatment are insufficient and contradictory. It has been reported that endotoxins were not efficiently inactivated by steam heat treatment at 121°C (19, 45). However, Ogawa et al. (31) recently reported that steam heat treatment was efficient in inactivating low concentrations of endotoxin, and that Escherichia coli LPS are unstable in aqueous solutions even at relatively low temperatures such as 70°C (see also reference 40). As mentioned above, these reports have shown that although studies have been carried out on the use of steam heat for depyrogenation, there is little agreement on its efficiency.The U.S. Pharmacopoeia (USP) recommends depyrogenation by dry-heat treatment at temperatures above 220°C for as long as is necessary to achieve a ≥3-log reduction in the activity of endotoxin, if the value is ≥1,000 endotoxin units (EU)/ml (11, 44). Due to the serious risks associated with endotoxins, the U.S. Food and Drug Administration (FDA) has set guidelines for medical devices and parenterals. The protocol to test for endotoxin contamination of medical devices recommends immersion of the device in endotoxin-free water for at least 1 h at room temperature, followed by testing of this extract/eluate for endotoxin. Current FDA limits are such that eluates from medical devices may not exceed 0.5 EU/ml, or 0.06 EU/ml if the device comes into contact with cerebrospinal fluid (43). The term EU describes the biological activity of endotoxins. For example, 100 pg of the standard endotoxin EC-5, 200 pg of EC-2, and 120 pg of endotoxin from E. coli O111:B4 all have an activity of 1 EU (17, 23).Steam heat treatment is comparatively easy to apply and control. If steam heat treatment could reliably inactivate endotoxins, it could be applied with sterilization, reducing labor, time, and expenditure. However, to our knowledge, few studies have addressed steam heat inactivation to determine the chemical and physical reactions that occur during the hydrothermal process, nor have any studies examined the relationship between the steam saturation ratio and the inactivation of endotoxins. Moreover, to date no study has been conducted on steam heat activation of endotoxins with reference to the chemical and physical parameters of the hydrothermal process.We have developed a groundbreaking method to thermoinactivate endotoxins by means of a soft hydrothermal process, in which the steam saturation ratio can be controlled. The steam saturation ratio is calculated as follows: steam saturation ratio (%) = [steam density (kg/m³)/saturated steam density (kg/m³)] × 100.The soft hydrothermal process lies in the part of the liquid phase of water with a high steam saturation ratio that is characterized by a higher ionic product (k_w) than that of ordinary water. The ionic product is a key parameter in promoting ionic reactions and can be related to hydrolysis. The ionic product of water is 1.0 × 10⁻¹⁴ (mol/liter)² at room temperature and increases with increasing temperature and pressure. A high ionic product favors the solubility of highly polar and ionic compounds, creating the possibility of accelerating the hydrolysis reaction process of organic compounds. Thus, water can play the role of both an acidic and an alkaline catalyst in the hydrothermal process (Fig. ​(Fig.1)1) (1, 37, 46). However, the soft hydrothermal process lies in the high-density water molecular area of the steam-gas biphasic field (Fig. ​(Fig.1)1) and is characterized by a lower dielectric constant (ɛ) than that of ordinary water. This process opens the possibility of promoting the affinity of water for nonpolar or low-polarity compounds, such as lipophilic organic compounds (46). We previously reported that most of the predominant aromatic hydrocarbons were removed from softwood bedding that had been treated by soft hydrothermal processing (24, 28).Open in a separate windowFIG. 1.Reaction field in the pressure-temperature relationship of water. The curve represents the saturated vapor pressure curve. The fields show where the pressure-temperature relationships are conducive to a variety of hydrothermal processing conditions, in which water has a large impact as a reaction medium. Because high-density water has a large dielectric constant and ionic product, it is an effective reaction medium for advancing ionic reactions, whereas water (in the form of steam) on the lower-pressure side of the saturated vapor pressure curve shows a good ability to form materials by covalent bonding. Small changes in the density of water can result in changes in the chemical affinity, which has the potential to advance a range of ionic and radical reactions.The purpose of the present study was to evaluate the thermoinactivation of endotoxins by the soft hydrothermal process, by controlling the steam saturation ratio, temperature, and time of treatment. There have been reports that endotoxins were thermoinactivated by steam heat treatment at 121°C in the presence of a nonionic surfactant and at over 135°C in its absence (4, 5, 10), but the minimum temperature for the inactivation of endotoxin remained unknown. This report provides the answer to this question.     

Intraspecific variation in spring leaf phenology and duration of leaf expansion in relation to leaf habit and leaf size of temperate tree species

Plant Ecology - Spring leaf phenology has been intensively studied in temperate deciduous broad-leaved tree species, but the phenology of evergreen broad-leaved tree species has seldom been focused...