Measurement of the nucleation of atmospheric aerosol particles

The formation of new atmospheric aerosol particles and their subsequent growth have been observed frequently at various locations all over the world. The atmospheric nucleation rate (or formation rate) and growth rate (GR) are key parameters to characterize the phenomenon. Recent progress in measurement techniques enables us to measure atmospheric nucleation at the size (mobility diameter) of 1.5 (±0.4) nm. The detection limit has decreased from 3 to 1 nm within the past 10 years. In this protocol, we describe the procedures for identifying new-particle-formation (NPF) events, and for determining the nucleation, formation and growth rates during such events under atmospheric conditions. We describe the present instrumentation, best practices and other tools used to investigate atmospheric nucleation and NPF at a certain mobility diameter (1.5, 2.0 or 3.0 nm). The key instruments comprise devices capable of measuring the number concentration of the formed nanoparticles and their size, such as a suite of modern condensation particle counters (CPCs) and air ion spectrometers, and devices for characterizing the pre-existing particle number concentration distribution, such as a differential mobility particle sizer (DMPS). We also discuss the reliability of the methods used and requirements for proper measurements and data analysis. The time scale for realizing this procedure is 1 year.     

Freezing tolerance and low molecular weight cryoprotectants in an invasive parasitic fly, the deer ked (Lipoptena cervi)

Insect cold hardiness is often mediated by low molecular weight cryoprotectants, such as sugars, polyols, and amino acids (AA). While many free-living northern insects must cope with extended periods of freezing ambient temperatures (Ta), the ectoparasitic deer ked Lipoptena cervi imago can encounter subfreezing Ta only during a short autumnal period between hatching and host location. Subsequently, it benefits from the body temperature of the cervid host for survival in winter. This study investigated the cold tolerance of the species by determining its lower lethal temperature (100% mortality, LLT100) during faster and slower cold acclimation, by determining the supercooling point (SCP) and by measuring the concentrations of potential low molecular weight cryoprotectants. The LLT100 of the deer ked was approximately -16 ° C, which would enable it to survive freezing nighttime Ta not only in its current area of distribution but also further north. The SCP was -7.8 ° C, clearly higher than the LLT100 , indicating that the deer ked displays freezing tolerance. The concentrations of free AA, especially nonessential AA, were higher in the cold-acclimated deer keds similar to several other insects. The concentrations of proline increased together with γ-aminobutyrate, arginine, asparagine, cystine, glutamate, glutamine, hydroxylysine, sarcosine, serine, and taurine. AA could be hypothesized to act as cryoprotectants by, e.g., protecting enzymes and lipid membranes from damage caused by cold.     

Application of a semi-automatic cartilage segmentation method for biomechanical modeling of the knee joint

Manual segmentation of articular cartilage from knee joint 3D magnetic resonance images (MRI) is a time consuming and laborious task. Thus, automatic methods are needed for faster and reproducible segmentations. In the present study, we developed a semi-automatic segmentation method based on radial intensity profiles to generate 3D geometries of knee joint cartilage which were then used in computational biomechanical models of the knee joint. Six healthy volunteers were imaged with a 3T MRI device and their knee cartilages were segmented both manually and semi-automatically. The values of cartilage thicknesses and volumes produced by these two methods were compared. Furthermore, the influences of possible geometrical differences on cartilage stresses and strains in the knee were evaluated with finite element modeling. The semi-automatic segmentation and 3D geometry construction of one knee joint (menisci, femoral and tibial cartilages) was approximately two times faster than with manual segmentation. Differences in cartilage thicknesses, volumes, contact pressures, stresses, and strains between segmentation methods in femoral and tibial cartilage were mostly insignificant (p > 0.05) and random, i.e. there were no systematic differences between the methods. In conclusion, the devised semi-automatic segmentation method is a quick and accurate way to determine cartilage geometries; it may become a valuable tool for biomechanical modeling applications with large patient groups.     

Development of Lactococcus lactis encoding fluorescent proteins,GFP, mCherry and iRFP regulated by the nisin-controlled gene expression system

Fluorescent proteins are useful reporter molecules for a variety of biological systems. We present an alternative strategy for cloning reporter genes that are regulated by the nisin-controlled gene expression (NICE) system. Lactoccocus lactis was genetically engineered to express green fluorescent protein (GFP), mCherry or near-infrared fluorescent protein (iRFP). The reporter gene sequences were optimized to be expressed by L. lactis using inducible promoter pNis within the pNZ8048 vector. Expression of constructions that carry mCherry or GFP was observed by fluorescence microscopy 2 h after induction with nisin. Expression of iRFP was evaluated at 700 nm using an infrared scanner; cultures induced for 6 h showed greater iRFP expression than non-induced cultures or those expressing GFP. We demonstrated that L. lactis can express efficiently GFP, mCherry and iRFP fluorescent proteins using an inducible expression system. These strains will be useful for live cell imaging studies in vitro or for imaging studies in vivo in the case of iRFP.     

Population history and life history influence the migration rate of female Glanville fritillary butterflies

This study examines the causes of emigration from small fragments of suitable habitat in a species that has a distinct metapopulation structure, frequent turnover of local populations, and substantial migration among local populations and currently unoccupied habitat fragments. We conducted a field experiment in which 727 individuals of the Glanville fritillary butterfly ( Melitaea cinxia ) originating from four regions were marked and released simultaneously in a natural environment. In three of the four source regions, larvae for the experiment were collected from dozens of small local populations, some of which had been established in the previous summer (new populations), whereas the remaining populations were older. In two of the source regions, female butterflies prefer a host plant ( Veronica spicata ) that is not present in the release area, where there is only Plantago lanceolata , the preferred host plant of females from the other two source regions. We found that migration rate of males was unrelated to any of the factors studied in this experiment. In contrast, two factors influenced the migration rate of females. First, Veronica -preferring females had higher emigration rate than Plantago- preferring females from the Plantago -containing release patches, demonstrating that the individual perception of habitat quality significantly influences the migration rate of females. Second, females from newly-established populations were more dispersive than females from older populations, supporting the notion that metapopulation processes (recurrent colonizations) select for increased migration. The observed migration rate was not correlated with any body size measurements, and thus the observed differences in migration rate were apparently caused by differences in the behaviour of female butterflies rather than in their flight capacity.     

Seeing strangers or announcing “danger”: Galectin-3 in two models of innate immunity

Recent investigations on the molecular mechanisms by which our immune system recognizes infections and initiates defense against those infections have led to the proposition of two models explaining the way our innate immunity system functions; the self-nonself model and the Danger model. In this review, the roles of galectin-3 in innate immunity against infections—host-pathogen interactions—will be discussed. We will shed light on the potential contribution of a β-galactoside binding mammalian lectin, galectin-3 as a molecule implicated in innate immunity from the angle of both the self-nonself model and the Danger model. Published in 2004.     

Movement of generative cell and vegetative nucleus in tobacco pollen tubes is dependent on microtubule cytoskeleton but independent of the synthesis of callose plugs

The role of microtubules (MTs) in vegetative nucleus (VN) and generative cell (GC) transport was investigated by comparing VN and GC distribution with callose plug formation in tobacco pollen grains germinated and grown for 12 h with the plant-specific anti-MT drug oryzalin. The VN-GC complex or VN alone was located close to the tube tip in 100% of controls, but in only 5% of oryzalin-treated tubes. Instead, in 38% of oryzalin tubes, the complex or VN occurred close to the last-formed callose plug; in 40% between or in the middle of plugs; and in 17%, in or near the grain. An aberrant microfilament (MF) cytoskeleton was revealed by expression of a green fluorescent protein-talin fusion protein in living oryzalin-treated tubes. The abnormal MF structures probably resulted from the absence of MTs and impaired - or were a consequence of - VN and GC movement into the tube tip. In oryzalin tubes with several callose plugs, the VN and GC could be in or near the grain, indicating that callose plug synthesis is not dependent on the movement of VN and GC into the tube. VN and GC movement and callose plug formation are apparently independent events, in which the transport of the VN-GC complex must precede callose plug synthesis. Maintenance of the correct developmental program requires an intact MT cytoskeleton, otherwise no fertile pollen tubes are formed.     

Genotoxicity of gliotoxin, a secondary metabolite of Aspergillus fumigatus, in a battery of short-term test systems

The genotoxic effects of gliotoxin, a known fungal secondary metabolite, were studied. Gliotoxin was purified from cultivation medium of Aspergillus fumigatus isolated from the indoor air of a moisture problem house. The genotoxicity of gliotoxin was assessed both in bacterial test systems including bacterial repair assay, Ames Salmonella assay and SOS-chromotest, and in mammalian cells using single cell gel (SCG) electrophoresis assay and sister-chromatid exchange (SCE) test. Gliotoxin was found to be genotoxic in the bacterial repair assay but, not in the Salmonella test or SOS-chromotest. A dose-related increase in DNA damage was observed in mouse RAW264.7 macrophages exposed to gliotoxin for 2 h in plain medium in the SCG assay. In contrast to the positive response in the SCG assay, gliotoxin did not induce any clear, dose-related increase in SCEs in Chinese hamster ovary (CHO) cells.     

Gene defect in hypodontia: exclusion of MSX1 and MSX2 as candidate genes

Hypodontia, congenital lack of one or a few teeth, is an autosomally inherited dominant trait. Homeobox genes MSX1 and MSX2 are expressed in presumptive dental tissues at the stage of initiation of tooth development. Recently, tooth development was shown to be inhibited in transgenic mice lacking a functional Msx1 gene. Here, we studied the relationship of the MSX1 and MSX2 genes to familial hypodontia in five Finnish families with a total of 20 affected individuals, by linkage analysis. The pairwise lod-scores regarding the intragenic microsatellites in the MSX1 and MSX2 genes at a recombination fraction of 0.0 were -3.1 and -3.0, respectively, thus excluding these genes as causative loci for hypodontia in these families.