Mutational Analysis of the Shigella flexneri O-Antigen Polymerase Wzy: Identification of Wzz-Dependent Wzy Mutants

The O-antigen (Oag) component of lipopolysaccharide (LPS) is a major virulence determinant of Shigella flexneri and is synthesized by the O-antigen polymerase, Wzy_Sf. Oag chain length is regulated by chromosomally encoded Wzz_Sf and pHS-2 plasmid-encoded Wzz_pHS2. To identify functionally important amino acid residues in Wzy_Sf, random mutagenesis was performed on the wzy_Sf gene in a pWaldo-TEV-GFP plasmid, followed by screening with colicin E2. Analysis of the LPS conferred by mutated Wzy_Sf proteins in the wzy_Sf-deficient (Δwzy) strain identified 4 different mutant classes, with mutations found in periplasmic loop 1 (PL1), PL2, PL3, and PL6, transmembrane region 2 (TM2), TM4, TM5, TM7, TM8, and TM9, and cytoplasmic loop 1 (CL1) and CL5. The association of Wzy_Sf and Wzz_Sf was investigated by transforming these mutated wzy_Sf plasmids into a wzy_Sf- and wzz_Sf-deficient (Δwzy Δwzz) strain. Comparison of the LPS profiles in the Δwzy and Δwzy Δwzz backgrounds identified Wzy_Sf mutants whose polymerization activities were Wzz_Sf dependent. Colicin E2 and bacteriophage Sf6c sensitivities were consistent with the LPS profiles. Analysis of the expression levels of the Wzy_Sf-GFP mutants in the Δwzy and Δwzy Δwzz backgrounds identified a role for Wzz_Sf in Wzy_Sf stability. Hence, in addition to its role in regulating Oag modal chain length, Wzz_Sf also affects Wzy_Sf activity and stability.     

Tapered plastic optical fiber-based biosensor--tests and application

Cells detection is crucial in microbiological analysis of clinical, food, water or environmental samples. However, currently employed methods are time consuming. Plastic optical fiber (POF) biosensors consist in a viable alternative for rapid and inexpensive scheme for detection. In order to study the sensitivity of tapers for microbiological detection, geometric parameters are studied, such as the taper waist diameter since the formation of taper regions are the key sensing element in this particular type of sensors. In this study, a series of POF taper sensors were prepared using a specially developed tapering machine, and the dispersion of geometric dimensions is evaluated, aiming to achieve the best tapering characteristics which will provide a better sensitivity on the sensor response. The fiber tapers that presented the finest results were those constructed in U-shaped (bended) configurations, with taper waist diameters ranging from 0.40 mm up to 0.50 mm. These fiber tapers were used as the main section of the monitoring device, and when chemically treated as immunosensors for the detection of bacteria, yeast and erythrocytes.     

Comparison of some new pretreatment methods for second generation bioethanol production from wheat straw and water hyacinth

Pretreatment of lignocellulosic residues like water hyacinth (WH) and wheat straw (WS) using crude glycerol (CG) and ionic liquids (IL) pretreatment was evaluated and compared with conventional dilute acid pretreatment (DAT) in terms of enzymatic hydrolysis yield and fermentation yield of pretreated samples. In the case of WS, 1-butyl-3-methylimidazolium acetate pretreatment was found to be the best method. The hydrolysis yields of glucose and total reducing sugars were 2.1 and 3.3 times respectively higher by IL pretreatment than DAT, while it was 1.4 and 1.9 times respectively higher with CG pretreatment. For WH sample, CG pretreatment was as effective as DAT and more effective than IL pretreatment regarding hydrolysis yield. The fermentation inhibition was not noticeable with both types of pretreatment methods and feedstocks. Besides, CG pretreatment was found as effective as pure glycerol pretreatment for both feedstocks. This opens up an attractive economic route for the utilization of CG.     

A chemically modified lipase preparation for catalyzing the transesterification reaction in even highly polar organic solvents

Acylation of Pseudomonas cepacia lipase with Pyromellitic dianhydride to modify 72% of total amino groups was carried out. Different organic solvents were screened for precipitation of modified lipase. It was found that 1,2-dimethoxyethane was the best precipitant which precipitated 97% protein and complete activity. PCMC (protein coated microcrystals), CLPCMC (crosslinked protein coated microcrystals), EPROS (enzyme precipitated and rinsed with organic solvents) and pH tuned preparations of modified and unmodified lipase were prepared and used for carrying out transesterification reaction with n-octane and dimethyl formamide (DMF) as reaction medium. In n-octane, among all the preparations, CLPCMC of modified lipase gave highest rate (1970 nmol min⁻¹ mg⁻¹) as compared to unmodified pH tuned lipase (128 nmol min⁻¹ mg⁻¹). In DMF, with both 1% (v/v) and 5% (v/v) water content, CLPCMC showed highest initial rate of 0.72 and 7.2 nmol min⁻¹ mg⁻¹, respectively. Unmodified pH tuned lipase showed no activity at all in DMF with both 1% and 5% (v/v) water content.     

查谟-克什米尔地区查谟后西瓦立克沉积中的亚洲象化石(英文)

描述了一件象属( Elephas) 的右上臼齿化石。标本产自查谟紧靠上西瓦立克亚群巨砾岩组( Boulder Conglomerate Formation) 之上的砂质、粉砂质泥岩夹砾石层中,化石地点位于查谟市南10 km,Kharian 村北约500 m 处。根据齿板数、齿脊频率、釉质层厚度、冠高指数、绝对大小和齿长/齿高指数等牙齿形态参数,暂时将之归为 Elephas cf. E. maximus indicus。还简短讨论了象属的地理分布和地质时代。     

Assessment of Polycyclic Aromatic Hydrocarbons (PAH) and Heavy Metals in the Vicinity of an Oil Refinery in India

Petroleum products are one of the major sources of energy for industry and daily life. Growth of the petroleum industry and shipping of petroleum products has resulted in the pollution. Populations living in the vicinity of oil refinery waste sites may be at greater risk of potential exposure to polycyclic aromatic hydrocarbons (PAH) through inhalation, ingestion, and direct contact with contaminated media. PAH have often been found to coexist with environmental pollutants including heavy metals due to similar pollution sources. The levels and distribution patterns of Σ16 PAH (sum of the 16 PAH) and heavy metals (lead, copper, nickel, cobalt, and chromium) were determined in soil and sediment in the vicinity (5 km radius) of an oil refinery in India. Concentrations of Σ16 PAH in the soils and sediments were found to be 60.36 and 241.23 ppm, respectively. Higher amount of PAH in sediments as compared to soil is due to low water solubility of PAH, settled in the bottom of aquatic bodies. The levels of lead, copper, nickel, cobalt, and chromium (total) in soil were 12.52, 13.52, 18.78, 4.84, and 8.29 ppm, while the concentrations of these metals in sediments were 16.38, 47.88, 50.15, 7.07, and 13.25 ppm, respectively. Molecular diagnostics indices of PAH (Ratio of Phenanthrene/Anthracene, Fluranthene/Pyrene) calculated for soil and sediment samples indicate that the oil refinery environment is contaminated with PAH from petrogenic as well as pyrolytic origin and heavy vehicular traffic on the Agra- Delhi National highway. Sixteen PAH priority pollutants were detected in the United States in entire samples collected near oil refinery areas and concentrations of Σ16 PAH in soil was found to be 1.20 times higher than the threshold value for PAH in soil by ICRCL (Inter-Departmental Committee on the Redevelopment of Contaminated Land). This concentration could lead to disastrous consequences for the biotic and abiotic components of the ecosystem and may affect the soil quality, thus impairing plant growth and its bioaccumulation in food chain.     

Polymorphisms of complement receptor 1 and interleukin-10 genes and systemic lupus erythematosus: a meta-analysis

A number of studies have tested the association of the complement receptor 1 (CR1) and Interleukin-10 (IL10) polymorphisms with systemic lupus erythematosus (SLE), but reported conflicting results. The aim of the study is to explore whether the CR1 and IL10 genes are associated with SLE susceptibility. We surveyed studies on the CR1 and IL10 polymorphisms and SLE using comprehensive Medline search and review of the references. A meta-analysis was conducted in a fixed effects model or random effects model based on between-study heterogeneity. Eighteen comparisons from 13 studies were included in the CR1 meta-analysis and a total of 16 separate comparisons were used for the IL10 meta-analysis. The CR1 meta-analysis showed no significant association of the CR1 functional polymorphisms with SLE. In contrast, the S structural variant of the CR1 showed a significant association (OR=1.544, 95% CI, 1.217–1.959, P<0.001). Stratification by ethnicity indicated that the CR1 S variant was associated with SLE in Caucasians (OR=1.667, 95% CI, 1.193–2.357, P=0.003). The IL10 meta-analysis showed a significant association between SLE and the G11 allele of IL10.G (OR=1.279, 95% CI; 1.027–1.593, P=0.028) in whole populations, and IL10 promoter −1082G allele was associated with SLE in Asians (OR=1.358, 95% CI; 1.015–1.816, P=0.039). In conclusion, the CR1 meta-analysis revealed the association of the S structural variant of the CR1 with SLE and the IL10 meta-analysis showed the association of IL10.G11 allele and SLE in whole populations and the association between promoter -A1082G polymorphism and SLE in Asians.     

The alpha helix dipole: screened out?

Aligned alpha helix peptide dipoles sum to a "macroscopic" dipole parallel to the helix axis that has been implicated in protein folding and function. However, in aqueous solution the dipole is counteracted by an electrostatic reaction field generated by the solvent, and the strength of the helix dipole may reduce drastically from its value in vacuum. Here, using atomic-detail helix models and Poisson-Boltzmann continuum electrostatics calculations, the net effective dipole moment, mu(eff), is calculated. Some initially surprising results are found. Whereas in vacuum mu(eff) increases with helix length, the opposite is found to be the case for transmembrane helices. In soluble proteins, mu(eff) is found to vary strongly with the orientation and position of the helix relative to the aqueous medium. A set of rules is established to estimate of the strength of mu(eff) from graphical inspection of protein structures.