Glycolipids Isolated from Spirulina maxima: Structure and Fatty Acid Composition

Several glycolipids were isolated from Spirulina maxima, an edible blue-green algae, by systematic fractionation with different solvents. Structural investigation by using methylation, GC-MS, and enzymic techniques indicated that the major glycolipids are O-β-d-galactosyl-(1→l′)-2′, 3′-di-O-acyl-d-glycerol, O-α-d-galactosyl-(l-→6)-O-β-d-galactosyl-(1→l′)-2′,3′-di-O-acyl-d-glycerol and 6-sulfo-O-α-quinovosyl-(l→l′)-2′, 3′-di-O-acyl-d-glycerol. Main fatty acid components of these glycolipids were identified as palmitic acid and linoleic or linolenic acid. Based on-these fatty acid compositions, Spirulina glycolipids were compared with those in higher plants.     

Isolation of an antigenically unique methanogen from human feces

A methanogenic bacterium with the morphological and physiological properties of the genus Methanobrevibacter was isolated from the feces of a Japanese man who excreted methane in his breath. Indirect immunofluorescence staining revealed that the isolate had an antigenicity unrelated to that of any known members of the genus Methanobrevibacter.     

Identification and characterization of cathepsin D in a highly purified sialidase from starfish A. pectinifera

A sialidase [EC 3.2.1.18] from the ovary of starfish Asterina pectinifera was isolated and highly purified by preparative PAGE. The SDS-PAGE separation of the purified enzyme revealed two natures of protein bands, upper (50 kDa) and a lower (47 kDa). To identify the protein, N-terminal amino acid sequence of the upper band was done. The sequence matched with the N-terminal amino acid sequence of human lysosomal mature cathepsin D and cathepsin D activity was also found in all the preparation steps. Protease inhibitor pepstatin A inhibited the proteolysis activity of cathepsin D against a synthetic substrate. The two enzymes sialidase and cathepsin D were separated from each other by using high-performance gel-filtration chromatography. The Western blot analysis and isoelectric focusing showed the co-purified cathepsin D is a 50 kDa protein with a PI value of 4.2.     

Edesign: Primer and Enhanced Internal Probe Design Tool for Quantitative PCR Experiments and Genotyping Assays

Analytical PCR experiments preferably use internal probes for monitoring the amplification reaction and specific detection of the amplicon. Such internal probes have to be designed in close context with the amplification primers, and may require additional considerations for the detection of genetic variations. Here we describe Edesign, a new online and stand-alone tool for designing sets of PCR primers together with an internal probe for conducting quantitative real-time PCR (qPCR) and genotypic experiments. Edesign can be used for selecting standard DNA oligonucleotides like for instance TaqMan probes, but has been further extended with new functions and enhanced design features for Eprobes. Eprobes, with their single thiazole orange-labelled nucleotide, allow for highly sensitive genotypic assays because of their higher DNA binding affinity as compared to standard DNA oligonucleotides. Using new thermodynamic parameters, Edesign considers unique features of Eprobes during primer and probe design for establishing qPCR experiments and genotyping by melting curve analysis. Additional functions in Edesign allow probe design for effective discrimination between wild-type sequences and genetic variations either using standard DNA oligonucleotides or Eprobes. Edesign can be freely accessed online at http://www.dnaform.com/edesign2/, and the source code is available for download.     

Analysis of the NH2-Terminal 83rd Amino Acid of Escherichia coli GyrA in Quinolone-Resistance

Artificial mutations of Gyrase A protein (GyrA) in Escherichia coli by site-directed mutagenesis were generated to analyze quinolone-resistant mechanisms. By genetic analysis of gyrA genes in a gyrA temperature sensitive (Ts) background, exchange of Ser at the NH₂-terminal 83rd position of GyrA to Trp, Leu, Phe, Tyr, Ala, Val, and Ile caused bacterial resistance to the quinolones, while exchange to Gly, Asn, Lys, Arg and Asp did not confer resistance. These results indicate that it is the most important for the 83rd amino acid residue to be hydrophobic in expressing the phenotype of resistance to the quinolones. These findings also suggest that the hydroxyl group of Ser would not play a major role in the quinolone-gyrase interaction and Ser83 would not interact directly with other amino acid residues.     

Inorganic nitrogen source utilization byFagus crenata on different soil types

The nitrogen source utilization by Fagus crenata distributed on soils with different forms of inorganic nitrogen in a cool-temperate deciduous forest in central Japan was determined by measuring foliar ¹⁵N. Two soil habitat types along a slope were delineated based on nitrogen transformation patterns, i.e., soils with high net nitrification rates and with no or low net nitrification, respectively. Despite differences in soil types, the study species, F. crenata, was distributed along the entire slope. The foliar ¹⁵N value of F. crenata from the lower slope area was significantly lower than that from the upper slope. Given the finding of a previous study that the ¹⁵N of NO₃^– was lower than that of NH₄⁺, our results indicate that reliance on NO₃^– as a nitrogen source was greater in the lower slope area than in the upper slope area. Differences in the values of foliar ¹⁵N were about 1, which is far less than the 10 ¹⁵N value of soil inorganic N reported in the previous study. This discrepancy might suggest that the study species utilized NO₃^– even in the upper site where net nitrification had not been detected. Measurements of nitrate reductase activity, an index of NO₃^– uptake, also supported this interpretation. Nitrate reduction occurred in leaves and roots at both the lower and the upper sites. Thus, the study species may be able to use NO₃^– even in soils with no net nitrification, a factor that could allow the distribution of F. crenata along the entire length of the slope.     

Construction of hybrid photosynthetic units using peripheral and core antennae from two different species of photosynthetic bacteria: detection of the energy transfer from bacteriochlorophyll a in LH2 to bacteriochlorophyll b in LH1

Typical purple bacterial photosynthetic units consist of supra-molecular arrays of peripheral (LH2) and core (LH1-RC) antenna complexes. Recent atomic force microscopy pictures of photosynthetic units in intact membranes have revealed that the architecture of these units is variable (Scheuring et al. (2005) Biochim Bhiophys Acta 1712:109–127). In this study, we describe methods for the construction of heterologous photosynthetic units in lipid-bilayers from mixtures of purified LH2 (from Rhodopseudomonas acidophila) and LH1-RC (from Rhodopseudomonas viridis) core complexes. The architecture of these reconstituted photosynthetic units can be varied by controlling ratio of added LH2 to core complexes. The arrangement of the complexes was visualized by electron-microscopy in combination with Fourier analysis. The regular trigonal array of the core complexes seen in the native photosynthetic membrane could be regenerated in the reconstituted membranes by temperature cycling. In the presence of added LH2 complexes, this trigonal symmetry was replaced with orthorhombic symmetry. The small lattice lengths for the latter suggest that the constituent unit of the orthorhombic lattice is the LH2. Fluorescence and fluorescence-excitation spectroscopy was applied to the set of the reconstituted membranes prepared with various proportions of LH2 to core complexes. Remarkably, even though the LH2 complexes contain bacteriochlorophyll a, and the core complexes contain bacteriochlorophyll b, it was possible to demonstrate energy transfer from LH2 to the core complexes. These experiments provide a first step along the path toward investigating how changing the architecture of purple bacterial photosynthetic units affects the overall efficiency of light-harvesting.     

6-O-sulfation of heparan sulfate differentially regulates various fibroblast growth factor-dependent signalings in culture

Heparan sulfate (HS) interacts with diverse heparin-binding growth factors and thereby regulates their bioactivities. These interactions depend on the structures characterized by the sulfation pattern and isomer of uronic acid residues. One of the biosynthetic modifications of HS, namely 6-O-sulfation, is catalyzed by three isoforms of HS6-O-sulfotransferase. We generated HS6ST-1- and/or HS6ST-2-deficient mice (6ST1-KO, 6ST2-KO, and double knock-out (dKO)) that exhibited different phenotypes. We examined the effects of HS 6-O-sulfation in heparin-binding growth factor signaling using fibroblasts derived from these mutant mice. Mouse embryonic fibroblasts (MEF) prepared from E14.5 dKO mice produced HS with little 6-O-sulfate, whereas 2-O-sulfation in HS from dKO-MEF (dKO-HS) was increased by 1.9-fold. HS6-O-sulfotransferase activity in the dKO-MEF was hardly detected, and HS2-O-sulfotransferase activity was 1.5-fold higher than that in wild type (WT)-MEFs. The response of dKO-MEFs to fibroblast growth factors (FGFs) was distinct from that of WT-MEFs; in dKO-MEFs, FGF-4- and FGF-2-dependent signalings were reduced to approximately 30 and 60% of WT-MEFs, respectively, and FGF-1-dependent signaling was moderately reduced compared with that of WT-MEFs but only at the lower FGF-1 concentrations. Analysis with a surface plasmon resonance biosensor demonstrated that the apparent affinity of dKO-HS for FGF-4 was markedly reduced and was also reduced for FGF-1. In contrast, the affinity of dKO-HS for FGF-2 was 2.5-fold higher than that of HS from WT-MEFs. Thus, 6-O-sulfate in HS may regulate the signalings of some of HB-GFs, including FGFs, by inducing different interactions between ligands and their receptors.