Application of bacterial magnetic particles as novel DNA carriers for ballistic transformation of a marine cyanobacterium

Summary Bacterial magnetite particles (BMPs) of 50 to 100nm diam were used as DNA carriers for the ballistic transformation of the marine cyanobacteriumSynechococcus. BMPs were bombarded into the cyanobacterial cells at several bombardment velocities using a particle gun. Successful transformation and gene expression were confirmed by Southern hybridization and CAT assay, respectively. The BMPs were also observed in the cyanobacterial cells by transmission electron microscopy. These results suggested that BMPs can be used as carriers for introducing DNA into bacterial cells.     

Photomicrobial sensors for selective determination of phosphate

A photomicrobial sensor consisting of immobilized Chlorella vulgaris and an oxygen electrode has been developed for selective determination of phosphate. When 40 mM phosphate was added to the sensor system, the photocurrent increased to a maximum under light irradiation with a response time of 1 min. The current increased with increasing phosphate concentration in the range 8–70 mM. Selectivity of the sensor was satisfactory. Good agreement was obtained between the phosphate concentrations in lake water determined by the photomicrobial sensor and by conventional colorimetry (correlation coefficient 0.96).     

Photomicrobial electrode for selective determination of sulphide

Summary A photomicrobial electrode, which uses the photosynthetic bacteria Chromatium sp. in conjunction with a hydrogen electrode, was developed for the determination of sulphide. The response time of the photomicrobial electrode was 5–10 min. A linear relationship was obtained between the current of the electrode and the sodium sulphide concentration below 3.5 mM. The minimum detectable concentration of sodium sulphide was 0.4 mM. Selectivity of the sensor is satisfactory. A good agreement was obtained between the photomicrobial electrode and the ethylene blue method (correlation coefficient: 0.90).     

A cold-labile acetyl-coenzyme-A hydrolase from the supernatant fraction of rat liver. Reactivation and reconstitution of the active species from the inactive monomer

An acetyl-coenzyme-A hydrolase from the supernatant fraction of rat liver is known to be rapidly inactivated at low temperature. Loss of catalytic activity is accompanied by apparent dissociation of tetrameric and dimeric forms of the enzyme into monomers. It was found that rewarming under appropriate conditions almost completely reversed the cold-induced inactivation and dissociation of the enzyme: At a protein concentration of 14 micrograms/ml, simple rewarming only partially restored the enzyme activity (less than 3% of the original activity), but at a higher concentration of the enzyme or in the presence of 1 mg/ml bovine serum albumin, the reactivation by warming was greater. Warming at 37 degrees C appeared to be optimal for reactivation; warming at 25 degrees C or at 43 degrees C was less effective. Longer exposure to cold did not affect reactivation on rewarming, but on repeated inactivation and reactivation the reactivation decreased to some extent, especially at lower concentrations of enzyme protein. Among various nucleotides tested, ATP greatly enhanced the restoration of the activity, while ITP, UTP and ADP were less effective and AMP, GTP, TTP and CTP had little effect. At an enzyme-protein concentration of 14 micrograms/ml, 2 mM ATP restored the enzyme activity to about 70% of that before cold treatment, while acetyl-CoA (0.5 mM) restored the activity about 50%. High concentrations of phosphate (0.92 M) and pyrophosphate (0.45 M) restored about 80% and 95%, respectively, of the original activity. Sucrose density gradient centrifugation of the active dimer at high enzyme concentration at 4 degrees C for 20 h produced a monomeric form without catalytic activity. Gel filtration showed that simple rewarming mostly converted the monomeric enzyme obtained in this way to the dimeric form, whereas on rewarming with ATP the monomer was mostly converted to a tetrameric form. The dimeric and tetrameric forms both had catalytic activity.     

Reexamination of paternal age effect in Down's syndrome

Summary Paternal age distribution for 1279 cases of Down's syndrome born in 1952–1968 was compared with the corresponding distribution for the general population, corrected for the maternal age as well as for the year of birth of the patients. Although there was no difference in the mean paternal age, the two distributions differed significantly, largely due to the excess of fathers aged 55 years and over and to the deficit of those aged 40–44 years in the patients born to mothers aged 30 years and over. The overall pattern of the relative incidence of Down's syndrome with advancing paternal age, with maternal age controlled, seems consistent with the hypothesis proposed by Stene et al. (1977). It increased from 0.8 for fathers aged 20–24 years slowly up to 1.2 for those aged 45–49 years, though with an intermediate drop to 0.8 at the age of 40–44 years, and then sharply to 2.4 for those aged 55 years and over. This rising pattern of the relative incidence with paternal age was essentially the same for the patients born in 1952–1960 and for those born in 1961–1968, although the slope was less steep in the latter than in the former group.This paper is dedicated to Professor Heinrich Schade in honor of his 70th birthday     

A specific microbial sensor for formic acid

Summary A microbial sensor consisting of immobilized Clostridium butyricum, two gas permeable Teflon membranes and fuel cell type electrode was suitable for the determination of formic acid. When the sensor was inserted into the sample solution containing formic acid, the current increases to a steady state with a response time of 20 min. The relationship between the steady state current and the formic acid concentration is linear up to 1 000 mg l^–1. The currents are reproducible with an average relative error of 5%. Selectivity of the sensor is satisfactory. Results obtained with this sensor and by gas chromatography were in good agreement (regression coefficient; 0.98) when the cultivation medium of Aeromonas formicans was employed. Immobilized Clostridium butyricum is stable for more than 20 days.     

Nitrogen fixation by immobilized Azotobacter chroococcum

A nitrogen-fixing bacterium, Azotobacter chroococcum, was immobilized in 2% agar gel. The optimum partial oxygen pressure, pO₂, of immobilized cells was 0.2 atm, wherea s that of native cells was 0.05 atm. When continual nitrogen fixation was performed under aerobic conditions, the nitrogenase activity of immobilized cells increased with increasing time. On the other hand, the activity of native cells decreased rapidly. Increase of nitrogenase activity was attributed to growth of the bacteria in the gel matrix. The production rate of total nitrogen compounds by the immobilized bacteria was also increased during the first 4 days. Nitrogen compounds produced by the immobilized cells were mainly amino acids such as γ-aminobutyrate, glutamate and arginine.     

A photochemical fuel cell system using Anabaena N-7363

Summary A blue-green algae, Anabaena N-7363, was immobilized in 2% agar gel. The hydrogen productivity of the immobilized algae was three times higher than that of free algae. The maximum hydrogen production rate by the immobilized blue-green algae was 0.52 moles h^–1 g^–1 (of wet gel) in the medium without nitrogen sources under illumination (10,000 lux). The oxygen evolved was then removed by a reactor containing aerobic bacteria. A photo-current of 15–20 mA was continuously produced for 7 days by the photochemical fuel cell system consisting of the immobilized Anabaena reactor, the oxygen-removing reactor and the hydrogen-oxygen fuel cell. The conversion ratio of hydrogen to current was from 80% to 100%.