Biodegradation of pyridine by an isolated bacterial consortium/strain and bio-augmentation of strain into activated sludge to enhance pyridine biodegradation

Pyridine and pyridine based products are of major concern as environmental pollutants due to their recalcitrant, persistent, toxic and teratogenic nature. In this study, we describe biodegradation of pyridine by an isolated consortium/strain under aerobic condition. Batch experiment results reveal that at lower initial pyridine concentrations (1-20 mg l(-1)), almost complete degradation was observed whereas at higher concentration (30-50 mg l(-1)), the degradation efficiency was dropped significantly. This may be due to inhibitory effect of pyridine at higher concentrations. The value of decay and yield coefficient was also determined. Furthermore, the bio-augmentation of isolated consortium/strain into the activated sludge consortium in different quantity has been also done and the effect of bio-augmentation on degradation has been studied. The results reveal that as the quantity of bio-augmentation increases, the degradation of pyridine increases. At 25% bio-augmentation, complete degradation of 20 mg l(-1) of pyridine can be achieved within 96 h of incubation. Thus, the study concluded that the bio-augmentation of the isolated consortium/strain into the sludge enhances the pyridine degradation efficiency of the biomass.     

Use of diluted medium in repeated-batch fermentation for production of lignin peroxidase by <Emphasis Type="Italic">Phanerochaete chrysosporium</Emphasis>

Lignin peroxidase has been extensively studied due to the potential use of this enzyme in environmental pollution control. Important aspects of the production of the enzyme by the white rot fungus, Phanerochaete chrysosporium, include the improvement of yield results and cell maintenance. In the present work, Phanerochaete chrysosporium was immobilized in polyurethane foam and used for repeated-batch fermentations with various dilution of the initial medium (D), and lignin peroxidase production was investigated. The peak of 283 ± 17.5 U lignin peroxidase/l production rate was obtained at a D of 1/5, with significantly lower production rates seen at higher and lower dilution ratios. When six cycles of repeated-batch fermentation were conducted using a D of 1/5, the results revealed that at least four cycles of repeated-batch fermentation were possible with a high lignin peroxidase production rate under a cut-off value of 178 ± 3.87 U/l. Furthermore, the cell-free culture broth could be successfully concentrated to 2,800 U/l by ultrafiltration. Thus, the present study shows that optimizing the dilution of the utilized nutritional medium can improve repeated batch production of lignin peroxidase from immobilized P. chrysosporium, in terms of both cycle number and output.     

Glucose ester enabled acylation in plant specialized metabolism

Acylation of core compound skeletons, together with other modifications, plays a significant role in producing the incredible diversity of plant specialized metabolites. Two major classes of acyltransferases, the BAHD and serine carboxypeptidase-like (SCPL) acyltransferases, can bring together through acylation compounds from the same or divergent metabolic pathways. BAHD acyltransferases (BAHD-ATs) employ CoA thioesters as the activated substrate, SCPL acyltransferases (SCPL-ATs), on the other hand, utilize β-acetal esters, typically glucose esters formed by UDP glycosyltransferases (UGTs). While the general trend of high energy glucose ester enabled acyltransfers is seen throughout the spermatophytes (seed plants), the specific metabolites that are conjugated appear to be lineage specific. In this review, we examine the reaction mechanism, biochemical property and evolutionary relationship of SCPL-ATs that utilize various glucose ester donors and acceptors from the same or different plant specialized metabolic pathways. The occurrence and taxonomic distribution of galloylated flavan-3-ols, hydrolyzable tannins and galloylated flavonols are also evaluated. Furthermore, glucose ester (acyl donor)-forming UGT activities and the subcellular localization of the UGT and SCPL-AT catalyzed reactions are discussed.     

Construction of a high-density genetic map of <Emphasis Type="Italic">Ziziphus jujuba</Emphasis> Mill. using genotyping by sequencing technology

The Chinese jujube (Ziziphus jujuba Mill., 2n = 2 × = 24), one of the most popular fruit trees in China, is widely cultivated and utilized in Asia. High-density genetic linkage maps are valuable resources for molecular breeding and functional genomics; however, they are still under-developed for the jujube. The genotyping by sequencing (GBS) strategy could be an efficient and cost-effective tool for single nucleotide polymorphism (SNP) discovery based on the sequenced jujube genome. Here, we report a new high-density genetic map constructed using GBS technology. An F1 population with 145 progenies and their parents (‘Dongzao’ × ‘Zhongningyuanzao’) were sequenced on the Illumina HiSeq 4000 platform. In total, 79.8 Gb of raw data containing 256,708,177 paired-end reads were generated. After data filtering and SNP genotyping, 40,372 polymorphic SNP markers were developed between the parents and 2540 (1756 non-redundant) markers were mapped onto the integrated genetic linkage map. The map spanned 1456.53 cM and was distributed among 12 linkage groups, which is consistent with the haploid chromosome number of the jujube. The average marker interval was 0.88 cM. The genetic map allowed us to anchor 224 Mb (63.7 %) of scaffolds from the sequenced ‘Junzao’ genome, containing 52 newly anchored scaffolds, which extended the genome assembly by 7 Mb. In conclusion, GBS technology was applied efficiently for SNP discovery in this study. The high-density genetic map will serve as a unique tool for molecular-assisted breeding and genomic studies, which will contribute to further research and improvement of the jujube in the near future.     

Over-expressing <Emphasis Type="Italic">GLT1</Emphasis> in a <Emphasis Type="Italic">gpd2</Emphasis>Δ mutant of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> to improve ethanol production

We constructed two recombinant strains of Saccharomyces cerevisiae in which the GPD2 gene was deleted using a one-step gene replacement method to minimize formation of glycerol and improve ethanol production. In addition, we also over-expressed the GLT1 gene by a two-step gene replacement method to overcome the redox-imbalancing problem in the genetically modified strains. The result of anaerobic batch fermentations showed that the rate of growth and glucose consumption of the KAM-5 (MATα ura3 gpd2Δ::RPT) strain were slower than the original strain, and the KAM-13 (MATα ura3 gpd2Δ::RPT P _PGK -GLT1) strain, however, was indistinguishable compared to the original strain using the same criteria, as analyzed. On the other hand, when compared to the original strain, there were 32 and 38% reduction in glycerol formation for KAM-5 and KAM-13, respectively. Ethanol production increased by 8.6% for KAM-5 and 13.4% for KAM-13. Dramatic reduction in acetate and pyruvic acid was also observed in both mutants compared to the original strains. Although gene GPD2 is responsible for the glycerol synthesis, the mutant KAM-13, in which glycerol formation was substantially reduced, was able to cope and maintain osmoregulation and redox balance and have increased ethanol production under anaerobic fermentations. The result verified the proposed concept of increasing ethanol production in S. cerevisiae by genetic engineering of glycerol synthesis and over-expressing the GLT1 gene along with reconstituted nicotinamide adenine dinucleotide metabolism.     

History and evolution of the International Association for Plant Biotechnology (IAPB): 1963–2008

The International Association for Plant Biotechnology (IAPB) was founded in 1963 at the first truly international conference on plant tissue culture, which was organized by Philip R. White. White was a devoted internationalist and was strongly committed to global scientific cooperation. He felt that the time had come for the international tissue culture community to organize so that it could meet regularly and provide a forum to its members for the exchange of ideas and information of mutual interest and use. The various activities of the IAPB since its founding—the publication of its newsletter, its journal, and the proceedings of its quadrennial congresses—faithfully document the remarkable advances in plant biotechnology that were made possible by the successful integration of tissue culture and molecular biology. In particular, the congress proceedings serve as time capsules, providing a wealth of information about the best of science and the most prominent scientists of the time. The history of the IAPB is indeed the history of plant biotechnology.     

Rebound effects of price differences

Goal, Scope and Background  Traditionally, comparative life cycle assessments (LCA) have not considered rebound effects, for instance in case of significant price differences among the compared products. No justifications have been made for this delimitation in scope. This article shows that price differences and the consequent effects of marginal consumer expenditure may influence the conclusions of comparative LCA significantly. We also show that considerations about rebound effects of price differences can be included in LCAs. Methods  The direct rebound effect of a price difference is marginal consumption. Based on statistical data on private consumption in different income groups (Statistics Denmark 2005a, 2005b), the present article provides an estimate of how an average Danish household will spend an additional 1 DKK for further consumer goods, when the household has gained money from choosing a cheaper product alternative. The approach is to use marginal income changes and the following changes in consumption patterns as an expression for marginal consumption. Secondly, the environmental impact potentials related to this marginal consumption are estimated by the use of environmental impact intensity data from an IO-LCA database (Weidema et al. 2005). Finally, it is discussed whether, and in which ways the conclusions of comparative LCAs can be affected by including the price difference between product alternatives. This is elucidated in a case study of a comparative LCA screening of two different kinds of Danish cheese products (Fricke et al. 2004). Results  Car purchase and driving, use and maintenance of dwelling, clothing purchase and insurance constitutes the largest percentages of the marginal consumption. In a case study of two cheeses, the including the impact potentials related to the price difference results in significant changes in the total impact potentials. Considering the relatively small price difference of the two products, it is likely also to have a significant influence on the results of comparative LCAs more generally. Discussion  The influence of marginal consumption in comparative LCAs is relevant to consider in situations with large differences in the price of the product alternatives being compared, and in situations with minor differences in the impact potentials related to the alternatives. However, different uncertainties are linked to determining the pattern for marginal consumption and the environmental impact potential related to this. These are first of all related to the method used, but also include inaccurate data of consumption in households, aggregation and weighting of income groups, aggregation of product groups, estimation and size of the price difference, and the general applicability of the results. Conclusion  Incorporating marginal consumption in consequential LCAs is possible in practice. In the case study used, including the rebound effects of the price difference has a significant influence on the result of the comparative LCA, as the result for the impact categories acidification and nutrient enrichment changes in favour of the expensive product. Recommendations and Perspectives  It is recommended that the rebound effects of price differences should be included more frequently in LCAs. In order to ensure this, further research in marginal consumption and investment patterns and IO data for different countries or regions is required. Furthermore, this study does not consider the economic distributional consequences of buying an expensive product instead of a cheaper product (e.g. related to how the profit is spent by those who provided the product). It should also be noted, that more expensive products not necessarily result in less consumption, as those who provided the product also will spend the money they have earned from the sale. Ideally, these consequences should also be further investigated. Likewise, the development of databases to include marginal consumption in PC-tools is needed. In general, considerations of marginal consumption would favour expensive product alternatives, depending, however, on the type of consumer. ESS-Submission Editor: Dr. David Hunkeler (david.hunkeler@aquaplustech.ch)     

Enhanced Mutant Screening in One-step PCR-based Multiple Site-directed Plasmid Mutagenesis by Introduction of Silent Restriction Sites for Structural and Functional Study of Proteins

Site-directed mutagenesis (SDM) has been widely used for studying the structure and function of proteins. A one-step polymerase chain reaction (PCR)-based multiple site-directed plasmid mutagenesis method with extended non-overlapping sequence at the 3′ end of the primer increases the PCR amplification efficiency and the capacity of multi-site mutagenesis. Here, we introduced silent restriction sites in the primers used in this PCR-based SDM method by utilizing SDM-Assist software to generate mutants of Helicobacter pylori neutrophil-activating protein (HP-NAP), whose gene has low GC content. The HP-NAP mutants were efficiently generated by this modified mutagenesis method and quickly identified by a simple restriction digest due to the presence of the silent restriction site. This modified PCR-based SDM method with the introduction of a silent restriction site on the primer is efficient for generation and identification of mutations in the gene of interest.     

Temporal variations in seed dispersal patterns of a bird-dispersed tree, <Emphasis Type="Italic">Swida controversa</Emphasis> (Cornaceae), in a temperate forest

The seed dispersal patterns of bird-dispersed trees often show substantial seasonal and annual variation due to temporal changes in frugivorous bird and bird-dispersed fruit distributions. Elucidating such variation and how it affects plant regeneration is important for understanding the evolution and seed dispersal maintenance strategies of these plants. In this study, we investigated the seed dispersal quantity and distance of a bird-dispersed plant, Swida controversa, for 2 years and detected large seasonal variations in dispersal pattern. Early in the fruiting season, short seed dispersal distance and large amounts of fruit consumption by birds (seed dispersal quantity) were observed. In contrast, late in the fruiting season, a long seed dispersal distance and small seed dispersal quantity were observed. This relationship between seed dispersal distance and quantity may help to maintain constant seed dispersal effectiveness during the long S. controversa fruiting season. Annual variation was also detected for both seed dispersal quantity and distance. More effective seed dispersal was achieved in the masting year, because both seed dispersal quantity and distance were greater than that in the non-masting year. These seed dispersal dynamics may contribute to the evolution and maintenance of S. controversa masting behavior. Thus, we identified substantial temporal variation on both seasonal and annual scales in the seed dispersal pattern of a bird-dispersed plant. The temporal variation in seed dispersal pattern revealed in this study probably plays a substantial role in the life history and population dynamics of S. controversa.