Process‐relevant concentrations of the leachable bDtBPP impact negatively on CHO cell production characteristics

The biopharmaceutical industry has invested considerably in the implementation of single‐use disposable bioreactors in place of or in addition to their stainless steel‐counterparts. This new wave of construction materials for disposable bioprocess containers encompass a plethora of uncharacterized secondary compounds that, when in contact with the culture media, can leach, contaminating the bioprocess. One such cytotoxic leachable already receiving attention is bis(2,4‐di‐tert‐butylphenyl)‐phosphate (bDtBPP), a breakdown product of the secondary antioxidant Irgafos 168 in polyethylene‐film based bags. This compound has been demonstrated to inhibit cell growth at concentrations ranging from 0.12 to 0.73 mg/L across an array of cell lines. Here we demonstrate that a further two CHO cell lines exhibit sensitivity to bDtBPP exposure at concentrations lower than that previously reported (0.035–0.1 mg/L). Furthermore, these inhibitory concentrations reflect bDtBPP levels found to leach early into the bioprocess, exposing reactor inoculums to serious risk. Quantitative label‐free LC‐MS/MS revealed that irrespective of cell line or concentration of bDtBPP, 8 proteins were found to be commonly differentially expressed in response to exposure to the compound highlighting biological processes related to cellular stress. Although the glycoprofile of the recombinant antibody remains primarily unchanged, we demonstrate that this compound when spiked at meaningful concentrations 72 h into culture considerably reduces the maximum cell density achieved. Studies like this reinforce the requirement for the complete characterization of all potential leachable compounds from disposable materials to assess their risk not only to the patient but also to the production pipeline itself. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1547–1558, 2016     

Experimental investigation of steady flow through a model of the human aortic arch

Steady flow through a model of the human aortic arch has been studied with hot-film anemometry. A three sensor hot-film velocity probe was inserted into an acrylic flow chamber fabricated from the in situ casting of a human aorta, and the axial, radial and tangential velocity profiles were determined for steady flows in the region of the aortic arch. These studies demonstrated the presence of a potential core throughout the arch region, with a concomitant boundary layer adjacent to the inner wall of curvature of the arch. Trapped secondary flows in this fluid layer along the inner wall were quantitatively determined. Our steady flow studies in the model human aortic arch suggests that a shear-dependent mass transfer mechanism may play a significant role in the development and propagation of atherosclerotic lesions in this segment of the human cardiovascular system.     

RNAi Interference by dsRNA Injection into Drosophila Embryos

Genetic screening is one of the most powerful methods available for gaining insights into complex biological process ¹. Over the years many improvements and tools for genetic manipulation have become available in Drosophila². Soon after the initial discovery by Frie and Mello ³ that double stranded RNA can be used to knockdown the activity of individual genes in Caenorhabditis elegans, RNA interference (RNAi) was shown to provide a powerful reverse genetic approach to analyze gene functions in Drosophila organ development ^{4, 5}.Many organs, including lung, kidney, liver, and vascular system, are composed of branched tubular networks that transport vital fluids or gases ^{6, 7}. The analysis of Drosophila tracheal formation provides an excellent model system to study the morphogenesis of other tubular organs ⁸. The Berkeley Drosophila genome project has revealed hundreds of genes that are expressed in the tracheal system. To study the molecular and cellular mechanism of tube formation, the challenge is to understand the roles of these genes in tracheal development. Here, we described a detailed method of dsRNA injection into Drosophila embryo to knockdown individual gene expression. We successfully knocked down endogenous dysfusion(dys) gene expression by dsRNA injection. Dys is a bHLH-PAS protein expressed in tracheal fusion cells, and it is required for tracheal branch fusion ^{9, 10}. dys-RNAi completely eliminated dys expression and resulted in tracheal fusion defect. This relatively simple method provides a tool to identify genes requried for tissure and organ development in Drosophila.Download video file.^{(52M, mov)}     

Structure-function relationships in human salivary <Emphasis Type="Italic">α</Emphasis>-amylase: role of aromatic residues in a secondary binding site

Human salivary α-amylase (HSAmy) has three distinct functions relevant to oral health: (i) hydrolysis of starch; (ii) binding to hydroxyapatite; and (iii) binding to bacteria (e.g. viridans streptococci). Oral bacteria utilize the starch hydrolyzing activity of HSAmy to derive their nutrients from dietary starch. Localized acid production by bacteria, through the metabolism of maltose generated by HSAmy, can lead to the dissolution of tooth enamel, a critical step in dental caries formation. HSAmy is a component of the acquired enamel pellicle and is used by Streptococcus gordonii to colonize the oral cavity. Although the active site of HSAmy for starch hydrolysis is well characterized, the regions responsible for the bacterial binding are yet to be defined. Since HSAmy possesses several secondary saccharide-binding sites in which aromatic residues are prominently located, we hypothesized that one of the secondary saccharide-binding sites harboring the aromatic residues W316 and W388, may play an important role in bacterial binding. To test this hypothesis, the aromatic residues W316 and W388 were mutated to alanine. The wild type and the mutant enzymes were characterized for their abilities to exhibit enzyme activity, starch binding and bacterial binding. Our results clearly showed that (i) the mutants W316A and W388A were not impaired in starch binding or bacterial binding; (ii) mutation of aromatic residues at these sites does not alter the overall conformation of the molecule; and (iii) the hydrolytic activity of the enzyme is unaffected against starch as substrates but reduced significantly against oligosaccharides.     

Studies on the removal of dyes from a synthetic textile effluent using barley husk in static-batch mode and in a continuous flow,packed-bed,reactor

Yarrowia lipolytica LGAM S(7)1 presented remarkable growth on industrial glycerol used as sole carbon substrate. Nitrogen-limited flask cultures were accompanied by restricted synthesis of reserve lipid, whilst amounts of citric acid were produced extracellularly. On the contrary, high amounts of reserve lipid (up to 3.5 g/l, 43% w/w of lipids in dry biomass) were produced in highly aerated continuous cultures. Lipid production was favoured at low specific dilution rates whilst fat-free material yield increased over the whole range of D (h(-1)). The maximum volumetric productivity obtained was 0.12 g lipid/1 h. Storage lipid composition did not present remarkable changes in the specific dilution rates tested. Oleate and linoleate were the dominant cellular fatty acids.     

Phosphoenolpyruvate availability and the biosynthesis of shikimic acid

The impact of increased availability of phosphoenolpyruvate during shikimic acid biosynthesis has been examined in Escherichia coli K-12 constructs carrying plasmid-localized aroF(FBR) and tktA inserts encoding, respectively, feedback-insensitive 3-deoxy-d-arabino-heptulosonic acid 7-phosphate synthase and transketolase. Strategies for increasing the availability of phosphoenolpyruvate were based on amplified expression of E. coli ppsA-encoded phosphoenolpyruvate synthase or heterologous expression of the Zymomonas mobilis glf-encoded glucose facilitator. The highest titers and yields of shikimic acid biosynthesized from glucose in 1 L fermentor runs were achieved using E. coli SP1.lpts/pSC6.090B, which expressed both Z. mobilis glf-encoded glucose facilitator protein and Z. mobilis glk-encoded glucose kinase in a host deficient in the phosphoenolpyruvate:carbohydrate phosphotransferase system. At 10 L scale with yeast extract supplementation, E. coli SP1.lpts/pSC6.090B synthesized 87 g/L of shikimic acid in 36% (mol/mol) yield with a maximum productivity of 5.2 g/L/h for shikimic acid synthesized during the exponential phase of growth.     

Scanning the genome of Mycobacterium tuberculosis to identify potential lectins

Lectins are carbohydrate binding proteins with important roles in many biological processes such as adhesion. Here we have identified 11 potential lectins from Mycobacterium tuberculosis H37Rv genome, using a comprehensive bioinformatics analysis, which will provide helpful clues in molecular mapping of pathogenesis and perhaps also serve as potential drug targets.     

The antioxidant properties and microbial load of Moringa oleifera leaves dried using a prototype convective air-dryer

The recent COVID-19 pandemic resulted in major postharvest losses because most fresh produce could not be sold. Drying is an important thermal-based food preservation method which could have prolonged the shelf-life of these produce, but most drying technologies are costly, and cannot be afforded by small-time farmers. From this context, we were interested in evaluating the drying of Moringa oleifera leaves (MOL) using a low-cost self-built prototype convective-air dryer (CAD), alongside conventional drying methods for its antioxidant properties, microbial load and phytoconstituents. Results showed total polyphenol content was the highest (p < 0.05) in our CAD samples, and it retained among the highest total flavonoid content, total antioxidant capacity, total alkaloid content and DPPH radical scavenging activity. Furthermore, methanolic CAD extract presented lower coliform and yeast and mold count than the aqueous CAD extract. We also briefly explored MOL as a sanitizer where the microbial load of the methanolic extract was comparable (p > 0.05) with several commercial non-alcoholic sanitizers, indicating its commercialization potential as a bio-friendly sanitizer. Finally, using GC–MS, we are the first to report (best of our knowledge) on the presence of caprolactam, an important bio-medical field compound, in the CAD sample’s aqueous extract.