Changes in Triphasic Mechanical Properties of Proteoglycan-Depleted Articular Cartilage Extracted from Osmotic Swelling Behavior Monitored Using High-Frequency Ultrasound

This study aims to obtain osmosis-induced swelling strains of normal and proteoglycan (PG) depleted articular cartilage using an ultrasound system and to investigate the changes in its mechanical properties due to the PG depletion using a layered triphasic model. The swelling strains of 20 cylindrical cartilage-bone samples collected from different bovine patellae were induced by decreasing the concentration of bath saline and monitored by the ultrasound system. The samples were subsequently digested by a trypsin solution for approximately 20 min to deplete proteoglycans, and the swelling behaviors of the digested samples were measured again. The bi-layered triphasic model proposed in our previous study (Wang et al., J Biomech Eng-Trans ASME 2007; 129: 413-422) was used to predict the layered aggregate modulus Hafrom the data of depth-dependent swelling strain, fixed charge density and water content. It was found that the region near the bone, for the normal specimens, had a significantly higher aggregate modulus (Ha₁= 20.6±18.2 MPa) in comparison with the middle zone and the surface layer (Ha₂= 7.8±14.5 MPa and Ha₃= 3.6±3.2 MPa, respectively) (p < 0.001). The normalized thickness of the deep layer h₁ was 0.68±0.20. After the trypsin digestion, the parametric values decreased to Ha₁ = 13.6±9.6 MPa, Ha₂ = 6.7±11.5 MPa, Ha₃ = 2.7±3.2 MPa, and h₁ = 0.57±0.28. Other models were also used to analyze data and the results were compared. This study showed that high-frequency ultrasound measurement combined with the triphasic modeling was capable of nondestructively quantifying the alterations in the layered mechanical properties of the proteoglycan-depleted articular cartilage.     

Mathematical design of prokaryotic clone-based microarrays

Background  

Clone-based microarrays, on which each spot represents a random genomic fragment, are a good alternative to open reading frame-based microarrays, especially for microorganisms for which the complete genome sequence is not available. Since the generation of a genomic DNA library is a random process, it is beforehand uncertain which genes are represented. Nevertheless, the genome coverage of such an array, which depends on different variables like the insert size and the number of clones in the library, can be predicted by mathematical approaches. When applying the classical formulas that determine the probability that a certain sequence is represented in a DNA library at the nucleotide level, massive amounts of clones would be necessary to obtain a proper coverage of the genome.     

Navigation inside a protease: substrate selection and product exit in the tricorn protease from Thermoplasma acidophilum

Chaperonins are multi-subunit double-ring complexes that mediate the folding of nascent or denatured proteins. Gene duplication has been a potent force in the evolution of chaperonins in Archaea. Here we show that gene conversion has also been an important factor. We utilized a novel maximum likehood-based phylogenetic method for scanning DNA sequence alignments for regions of anomalous phylogenetic signal, such as those affected by gene conversion. Our results suggest that in crenarchaeotes, where an ancient gene duplication producing alpha and beta subunits took place in the common ancestor of the Pyrodictium, Aeropyrum, Pyrobaculum and Sulfolobus lineages, multiple independent gene conversions have occurred between the alpha and beta genes independently in each of these groups. Significantly, the conversions have repeatedly homogenized the region of the gene encoding the substrate-binding domain. This suggests that while the alpha and beta subunits in crenarchaeotes share only 50-60% overall amino acid sequence identity, they do not possess distinct roles in the binding of substrate. Cryptic gene conversion between distantly related paralogs may be more common than is currently appreciated, and could be a significant factor in slowing the functional differentiation of proteins encoded by duplicate genes long after their duplication.     

Anti-α-fodrin antibodies do not add much to the diagnosis of Sjögren's syndrome

The presence of anti-α-fodrin autoantibodies has been reported to be a highly specific and sensitive test for the diagnosis of Sjögren's syndrome (SjS). We looked (in Nijmegen) for anti-α-fodrin, anti-Ro60, and anti-La autoantibodies in a cohort of 51 patients with rheumatic diseases (primary SjS [21], secondary SjS [6], rheumatoid arthritis [RA] [12], systemic lupus erythematosus [SLE] [6], and scleroderma [6]) and in 28 healthy subjects, using ELISA, immunoblotting, and immunoprecipitation. The same samples were analyzed with an alternative anti-α-fodrin ELISA in Hanover. The Nijmegen ELISA of the sera from primary SjS showed sensitivities of 43% and 48% for IgA- and IgG-type anti-α-fodrin antibodies, respectively. The Hanover ELISA showed sensitivities of 38% and 10% for IgA- and IgG-type anti-α-fodrin antibodies, respectively. The ELISAs for α-fodrin showed six (Nijmegen) and four (Hanover) anti-α-fodrin-positive RA sera. IgA and IgG anti-fodrin antibodies were also present in four patients with secondary SjS. The sensitivities of Ro60 and La-antibodies in the Nijmegen ELISA were 67% and 62%, respectively. Unlike anti-α-fodrin antibodies, all anti-Ro60 and anti-La positive sera could be confirmed by immunoblotting or RNA immunoprecipitation. Thus, anti-Ro and anti-La autoantibodies were more sensitive than anti-α-fodrin autoantibodies in ELISA and were more frequently confirmed by other techniques. Anti-La antibodies appear to be more disease-specific than anti-α-fodrin antibodies, which are also found in RA sera. Therefore, the measurement of anti-α-fodrin autoantibodies does not add much to the diagnosis of Sjögren's syndrome.     

Bestimmung von Fumonisinen in komplexen Lebensmittelmatrices mittels Accelerated Solvent Extraktion (ASE)

Accelerated solvent extraction (ASE) is an alternative sample extraction procedure for fumonisins in corn and corn products. ASE gave results comparable to that of a draft CEN method, but required less extraction time. Furthermore, ASE gave significantly higher quantitative values than another method reported for extraction of fumonisins (Trucksess et al., 1995).     

Individualized,discrete event,simulations provide insight into inter- and intra-subject variability of extended-release,drug products

Objective

Develop and validate particular, concrete, and abstract yet plausible in silico mechanistic explanations for large intra- and interindividual variability observed for eleven bioequivalence study participants. Do so in the face of considerable uncertainty about mechanisms.

Methods

We constructed an object-oriented, discrete event model called subject (we use small caps to distinguish computational objects from their biological counterparts). It maps abstractly to a dissolution test system and study subject to whom product was administered orally. A subject comprises four interconnected grid spaces and event mechanisms that map to different physiological features and processes. Drugs move within and between spaces. We followed an established, Iterative Refinement Protocol. Individualized mechanisms were made sufficiently complicated to achieve prespecified Similarity Criteria, but no more so. Within subjects, the dissolution space is linked to both a product-subject Interaction Space and the GI tract. The GI tract and Interaction Space connect to plasma, from which drug is eliminated.

Results

We discovered parameterizations that enabled the eleven subject simulation results to achieve the most stringent Similarity Criteria. Simulated profiles closely resembled those with normal, odd, and double peaks. We observed important subject-by-formulation interactions within subjects.

Conclusion

We hypothesize that there were interactions within bioequivalence study participants corresponding to the subject-by-formulation interactions within subjects. Further progress requires methods to transition currently abstract subject mechanisms iteratively and parsimoniously to be more physiologically realistic. As that objective is achieved, the approach presented is expected to become beneficial to drug development (e.g., controlled release) and to a reduction in the number of subjects needed per study plus faster regulatory review.

     

Contribution to investigation of antimicrobial activity of styrylquinolines

Series of new ring-substituted styrylquinolines and two oxorhenium complexes were prepared and characterized. The compounds were analyzed using RP-HPLC to determine lipophilicity. Primary in vitro screening of the synthesized compounds was performed against fungal and bacterial strains. Some compounds were active against bacteria at micromolar level and against fungi at submicromolar level. Compounds 5,7-dichloro-2-[2-(2-ethoxyphenyl)vinyl]quinolin-8-ol expressed excellent antifungal activity comparable with or higher than the standard fluconazole as well as antibacterial activity against Staphylococcus strains comparable with or higher than the standards bacitracin, penicillin and ciprofloxacin. The structure–activity relationships are discussed.     

Finite volume analysis of temperature effects induced by active MRI implants: 2. Defects on active MRI implants causing hot spots

Background

Active magnetic resonance imaging implants, for example stents, stent grafts or vena cava filters, are constructed as wireless inductively coupled transmit and receive coils. They are built as a resonator tuned to the Larmor frequency of a magnetic resonance system. The resonator can be added to or incorporated within the implant. This technology can counteract the shielding caused by eddy currents inside the metallic implant structure. This may allow getting diagnostic information of the implant lumen (in stent stenosis or thrombosis for example). The electro magnetic rf-pulses during magnetic resonance imaging induce a current in the circuit path of the resonator. A by material fatigue provoked partial rupture of the circuit path or a broken wire with touching surfaces can set up a relatively high resistance on a very short distance, which may behave as a point-like power source, a hot spot, inside the body part the resonator is implanted to. This local power loss inside a small volume can reach ¼ of the total power loss of the intact resonating circuit, which itself is proportional to the product of the resonator volume and the quality factor and depends as well from the orientation of the resonator with respect to the main magnetic field and the imaging sequence the resonator is exposed to.

Methods

First an analytical solution of a hot spot for thermal equilibrium is described. This analytical solution with a definite hot spot power loss represents the worst case scenario for thermal equilibrium inside a homogeneous medium without cooling effects. Starting with this worst case assumptions additional conditions are considered in a numerical simulation, which are more realistic and may make the results less critical. The analytical solution as well as the numerical simulations use the experimental experience of the maximum hot spot power loss of implanted resonators with a definite volume during magnetic resonance imaging investigations. The finite volume analysis calculates the time developing temperature maps for the model of a broken linear metallic wire embedded in tissue. Half of the total hot spot power loss is assumed to diffuse into both wire parts at the location of a defect. The energy is distributed from there by heat conduction. Additionally the effect of blood perfusion and blood flow is respected in some simulations because the simultaneous appearance of all worst case conditions, especially the absence of blood perfusion and blood flow near the hot spot, is very unlikely for vessel implants.

Results

The analytical solution as worst case scenario as well as the finite volume analysis for near worst case situations show not negligible volumes with critical temperature increases for part of the modeled hot spot situations. MR investigations with a high rf-pulse density lasting below a minute can establish volumes of several cubic millimeters with temperature increases high enough to start cell destruction. Longer exposure times can involve volumes larger than 100 mm³. Even temperature increases in the range of thermal ablation are reached for substantial volumes. MR sequence exposure time and hot spot power loss are the primary factors influencing the volume with critical temperature increases. Wire radius, wire material as well as the physiological parameters blood perfusion and blood flow inside larger vessels reduce the volume with critical temperature increases, but do not exclude a volume with critical tissue heating for resonators with a large product of resonator volume and quality factor.

Conclusion

The worst case scenario assumes thermal equilibrium for a hot spot embedded in homogeneous tissue without any cooling due to blood perfusion or flow. The finite volume analysis can calculate the results for near and not close to worst case conditions. For both cases a substantial volume can reach a critical temperature increase in a short time. The analytical solution, as absolute worst case, points out that resonators with a small product of inductance volume and quality factor (Q V_ind < 2 cm³) are definitely save. Stents for coronary vessels or resonators used as tracking devices for interventional procedures therefore have no risk of high temperature increases. The finite volume analysis shows for sure that also conditions not close to the worst case reach physiologically critical temperature increases for implants with a large product of inductance volume and quality factor (Q V_ind > 10 cm³). Such resonators exclude patients from exactly the MRI investigation these devices are made for.     

Complete genome sequence of the kirromycin producer Streptomyces collinus Tü 365 consisting of a linear chromosome and two linear plasmids

Streptomyces collinus Tü 365 (DSMZ 40733), isolated from Kouroussa (Guinea), is the producer of the elfamycin family antibiotic kirromycin, which inhibits bacterial protein biosynthesis by interfering with elongation factor EF-Tu. Here, we report on the Streptomyces collinus Tü 365 complete genome sequence of the 8.27 MB chromosome and the two plasmids SCO1 and SCO2.     

英国多克隐花植物保护区森林土壤和凋落叶特性及其与真菌的关系

报道了英国独特的真菌保护区里真菌的生态学和生物多样性,而该保护区内有关物种构成的数据自1994年就开始进行收集了。关于真菌的生态学相互关系以及它们在总的生态系统功能中的作用可以作为生物多样性数据的补充。5~8月期间,在8块覆盖着不同植被（山毛榉,桦树,桦栎山毛榉,禾本科植物）实验区里,研究了森林凋落叶和叶本层土壤的特性和构成,测量了细菌种群数量和真菌的生物量（针对麦角固醇而言）。用相关分析和分段回归建模方法,结合可通过并行研究采集到的原生动物和线虫数据,得到了一系列结果。这些结果强调了某些因素的复杂性,这些因素影响着森林土壤和森林凋落叶中真菌生物量空间可变性的时间动态。大多数的相互作用看起来是瞬时的,在解释环境观测记录时应该对这一点给予充分考虑。最后,解释了若干具体关系,给出了进一步研究的方向,讨论了对整个生态系统功能研究的必要性。