Flow injection assays for NADH and ethanol using photosensitized rose bengal and luminol–copper (II) chemiluminescence system

The online photoreaction of the rose bengal photosensitized luminol–copper (II) chemiluminescence (CL) system was used for the determination of β-nicotinamide adenine dinucleotide (NADH) and ethanol (EtOH) in pharmaceutical formulations combined with a flow injection technique. NADH can significantly enhance the CL emission of the reaction. For EtOH, alcohol dehydrogenase in soluble form was utilized in the presence of nicotinamide adenine dinucleotide resulting in NADH production. The limit of detection (3σ blank, 𝑛 = 3) of 4.0 × 10⁻⁸ and 2.17 × 10⁻⁵ M, and linear range 1.3 × 10⁻⁷ to 2.5 × 10⁻⁵ M (R² = 0.9998, n = 6) and 0.11–2.17 × 10⁻³ M (R² = 0.9996, n = 6) were obtained for NADH and EtOH respectively. The injection rate was 100 h⁻¹ with a relative standard deviation (n = 3) of 1.5–4.8% in the range studied for both analytes. The procedure was satisfactorily applied to pharmaceutical formulations with recoveries in the range 91.6 ± 3.0% to 110 ± 2.0% for NADH and 88 ± 3.0% to 95.4 ± 4.0% for EtOH. The results obtained were very consistent and did not differ considerably from the reported approaches at a 95% confidence limit. The possible mechanism of the CL reaction is also explained briefly.     

Environmentally friendly protocol for the determination of sitagliptin phosphate in pharmaceutical preparations and biological fluids using l-tyrosine as a fluorescence probe

A responsive spectrofluorometric method was developed for the determination of sitagliptin phosphate using l -tyrosine as a fluorescence probe. The fluorescence intensity of l -tyrosine was quenched with sitagliptin phosphate. The fluorescence intensity was recorded at 307 nm using a 272 nm excitation wavelength. The calibration plot between fluorescence intensity and the concentration of drug was linear in the range of 0.1 to 2.0 mM with a good correlation value of 0.997. The limit of detection and quantification were established to be 3.7 × 10⁻⁴ and 1.23 × 10⁻³ mM, respectively. Commonly used excipients did not interfere with sitagliptin phosphate measurement. The proposed method was used to measure the sitagliptin phosphate in its standard type, dosage form, and biological samples. The percent recovery ranged from 97.41–103.36%. The static quenching was shown to be responsible for quenching as indicated by the Stern–Volmer plot. The method was validated using ICH guidelines and profitably applied for the content uniformity test, resulting in a high percent recovery and small relative standard deviation. The proposed approach is effortless, susceptible, selective, economic, and provides a high precision and accuracy, and can be used to determine sitagliptin phosphate in the pharmaceutical industry.     

Intestinal cancer development in response to oral infection with high-fat diet-induced Type 2 diabetes (T2D) in collaborative cross mice under different host genetic background effects

Mammalian Genome - Type 2 diabetes (T2D) is a metabolic disease with an imbalance in blood glucose concentration. There are significant studies currently showing association between T2D and...     

New branched Porolithon species (Corallinales,Rhodophyta) from the Great Barrier Reef,Coral Sea,and Lord Howe Island

Porolithon is one of the most ecologically important genera of tropical and subtropical crustose (non-geniculate) coralline algae growing abundantly along the shallow margins of coral reefs and functioning to cement reef frameworks. Thalli of branched, fruticose Porolithon specimens from the Indo-Pacific Ocean traditionally have been called P. gardineri, while massive, columnar forms have been called P. craspedium. Sequence comparisons of the rbcL gene both from type specimens of P. gardineri and P. craspedium and from field-collected specimens demonstrate that neither species is present in east Australia and instead resolve into four unique genetic lineages. Porolithon howensis sp. nov. forms columnar protuberances and loosely attached margins and occurs predominantly at Lord Howe Island; P. lobulatum sp. nov. has fruticose to clavate forms and free margins that are lobed and occurs in the Coral Sea and on the Great Barrier Reef (GBR); P. parvulum sp. nov. has short (<2 cm), unbranched protuberances and attached margins and is restricted to the central and southern GBR; and P. pinnaculum sp. nov. has a mountain-like, columnar morphology and occurs on oceanic Coral Sea reefs. A rbcL gene sequence of the isotype of P. castellum demonstrates it is a different species from other columnar species. In addition to the diagnostic rbcL and psbA marker sequences, the four new species may be distinguished by a combination of features including thallus growth form, margin shape (attached or unattached), and medullary system (coaxial or plumose). Porolithon species, because of their ecological importance and sensitivity to ocean acidification, need urgent documentation of their taxonomic diversity.     

Improvement of Early Maturing and Climate Resilient Chickpea (<i>Cicer arietinum</i> L.) Cultivars Suitable for Multiple Environments in Bangladesh

Ensuring food security for the rapidly increasing population and changing climatic scenarios are requisites for exploiting the genetic divergence of food crops. A study was undertaken to sort out an early maturing chickpea variety for fitting easily between rice-rice cropping systems in the Eastern Indo-Gangetic Plain of Bangladesh. The trial was comprised of eight elite lines of chickpea and executed at various localities in Bangladesh from 2014– 15 to 2017–18. The result explored the chickpea genotype, BARI Chola-11 remained superior to the rest of the elite genotypes for having a short maturity period (100–106 days), and lesser days to 50% flowering (47– 55 days). The same genotype was recorded to have robust vegetative and reproductive yield attributes including plant height (49–57 cm), podsplant⁻¹ (37–50), and optimum 100 seed weight (19.5–20.6 g). Owing to better yield attributes, BARI Chola-11 resulted in the maximum seed yield (1200–1500 kg ha⁻¹ ) of chickpea and might be recommended for general adoption in the region for boosting nutritional security status through improved productivity under changing climate.     

Evaluation of scanning resolution,detector choice and detector orientation to be used for accurate and time-efficient commissioning of a 6MV clinical linear accelerator

The present study is aimed at exploring different scanning parameters, detectors and their orientations for time-efficient and accurate commissioning of a 6 MV clinical linear accelerator (LINAC). Beam profiles and percentage depth dose (PDD) curves were measured with a PTW dosimetry diode, a PTW Semiflex and a PinPoint ion chamber in different orientations. To acquire beam data, equidistant (step size of 0.5 mm, 1 mm, 2 mm and 3 mm) and fanline (step size of 2–0.5 mm, 2–1 mm, 3–0.5 mm and 3-1 mm) scanning modes were employed and data measurement time was recorded. Scan time per measurement point was also varied (0.2 s, 0.5 s and 1.0 s) to investigate its effect on the accuracy and acquisition time of beam data. Accuracy of the measured data was analyzed on the basis of the variation between measured data and data modeled by a treatment planning system. Beam profiles (particularly in penumbra region) were found to be sensitive to variation in scanning resolution and showed an improved accuracy with decrease in step size, while PDD curves were affected negligibly. The accuracy of beam data obtained with the PTW dosimetry diode and the PinPoint ion chamber was higher than those obtained with the PTW Semiflex ion chamber for small fields (2?×?2 cm² and 3?×?3 cm²). However, the response of the PTW diode and the PinPoint ion chamber was significantly indifferent in these fields. Furthermore, axial orientation of the PTW Semiflex ion chamber improved accuracy of profiles and PDDs as compared to radial orientation, while such a difference was not significant for the PinPoint ion chamber. It is concluded that a scan time of 0.2 s/point with a fanline scanning resolution of 2–1 mm for beam profiles and 3 mm for PDDs are most favorable in terms of accuracy and time efficiency. For small fields (2?×?2 cm² and 3?×?3 cm²), a PinPoint ion chamber in radial orientation or a dosimetry diode in axial orientation are recommended for both beam profiles and PDDs. If a PinPoint ion chamber and a PTW dosimetry diode are not available, a Semiflex ion chamber in axial orientation may be used for small fields.

     

Biochemical and Physiological Responses of Cucumis sativus Cultivars to Different Combinations of Low-Temperature and High Humidity

Low-temperature and high humidity are typical environmental factors in the plastic tunnel and solar greenhouse during the cold season that restricts plant growth and development. Herein, we investigated the impact of different combinations of low-temperature and high humidity (day/night: T1 15/10 °C?+?95%, T2 12/8 °C?+?95%, and T3 9/5 °C?+?95%) along with a control (CK 25/18 °C?+?80%) on cucumber cultivars viz: Zhongnong37 (ZN37: resistant) and Shuyanbailv (SYB: sensitive). The low-temperature and high humidity stresses increased electrolyte leakage (EL), malondialdehyde (MDA), hydrogen peroxide (H₂O₂) and intercellular concentration of carbon dioxide (Ci), and reduced morphological indices, relative water content (RWC), net photosynthesis rate (Pn), stomatal conductance (Gs), transpiration rate (E) and leaf pigments in both cultivars as compared to control (CK). Superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), ascorbate peroxidase (APX), monodehydroascorbate reductase (MDHAR), dehydroascorbate reductase (DHAR), and glutathione reductase (GR) were decreased in cv. SYB under stress conditions as compared to cv. ZN37. Low-temperature and high humidity treatments showed an increase in proline and soluble protein content in cv. ZN37 as compared to cv. SYB. Abscisic acid (ABA) and jasmonic acid (JA) were augmented while indole-3-acetic acid (IAA), zeatin (ZT), zeatin riboside (ZR), and gibberellic acid (GA) were decreased in both cultivars. Under T3 (9/5 °C?+?95%), Pn, protoporphyrin, and ZT were extremely decreased by 71.3%, 74.3%, and 82.4%, respectively, in cv. SYB compared to control. Moreover, principal component analysis (PCA) based on physiochemical traits confirmed that cv. ZN37 had the strongest correlation with antioxidant enzymes, proline, and soluble protein content than cv. SYB under low-temperature and high humidity treatments. Our results suggest that a stress-tolerant cultivar mitigates stress damage in cucumber transplants by regulating photosynthetic efficiency, antioxidant capacity and hormonal profile when compared to a stress-sensitive cultivar.

     

Fullerenol [60] Nano-cages for Protection of Crops Against Oxidative Stress: A Critical Review

Journal of Plant Growth Regulation - Fullerenols are carbon nanoparticles that have been declared as free radical sponges. There is a need to take a prudent path toward its applications in various...