Potential of xylanase from thermophilic Bacillus sp. XTR-10 in biobleaching of wood kraft pulp

An extracellular xylanase produced under optimal conditions by a thermophilic strain of Bacillus sp. XTR-10 was evaluated for its potential application in biobleaching of wood kraft pulp. Spectrophotometric analysis showed considerable release of lignin derived compounds and chromophoric material by the xylanase treated pulp samples. Xylanase was found to be effective in the liberation of reducing sugars in the pulp filtrates with increment in enzyme dose and reaction time. Eight hours pretreatment with 40 IU of xylanase/g of dry pulp resulted in 16.2% reduction of kappa number with 25.94% ISO increase in brightness as compared to the control. The same treatment slightly lowered the tensile strength and burst index, however. Enzyme pretreatment of the pulp saved 15% active chlorine charges in single step and 18.7% in multiple steps chemical bleaching with attainment of brightness at the level of the control. These results indicate the potential of enzymatic pretreatment of pulp for reduction in environmental discharge of hazardous waste from the pulp and paper industry.     

Organotin(IV) 4-methoxyphenylethanoates: Synthesis, spectroscopic characterization, X-ray structures and in vitro anticancer activity against human prostate cell lines (PC-3)

A series of organotin(IV) carboxylates, [Bu₂SnL₂] (1), [Et₂SnL₂] (2), [Me₂SnL₂] (3), [Bu₃SnL]_n(4), [Me₆Sn₂L₂]_n(5), [Ph₃SnL]_n(6) and [Oct₂SnL₂] (7), where L = O₂CCH₂C₆H₄OCH₃-4, have been synthesized. These complexes have been characterized by elemental analysis, FT-IR and multinuclear NMR (¹H, ¹³C and ¹¹⁹Sn). Based on spectroscopic results, the ligand appeared to coordinate to the Sn atom through COO moiety. Single crystal analysis has shown a bridging behavior of ligand in tributyl- and trimethyltin(IV) derivatives, and a chelating bidentate mode in diethyltin(IV) complex. Bioassay results have shown that these compounds have good antibacterial, antifungal and antitumor activity. The activity against prostate cancer cell lines (PC-3) decreased in the order 1 > 5 > 2 > 3 > 7.     

A phosphine complex of copper (I) bromide as single-source precursor for the aerosol-assisted chemical vapour deposition of phosphide

A new homobimetallic complex [Cu₂(tpp)₂(dppm)Br₂] (1) of copper(I) bromide with triphenylphosphine (tpp) and bis-diphenylphosphinomethane (dppm) has been synthesized and charaterized by m.p., elemental analysis, FT-IR, ¹H NMR, mass spectrometry, thermal studies and single crystal X-ray analysis. The solid-state molecular structure of 1, belonging to the monoclinic crystal system with space group P2₁/n, describes it as a neutral dinuclear species in which two copper atoms are bridged together through two bromides and a dppm ligand and each copper atom possesses a distorted tetrahedral geometry. Complex 1 was studied as a single-source precursor for the fabrication of phase pure thin films of Cu₃P by aerosol-assisted chemical vapour deposition. The films have been characterized by PXRD, SEM and ED-XRF analyses and found to exhibit the particles size range 200−400 nm with high purity and surface uniformity.     

Nutrient content of tropical edible seaweeds, Eucheuma cottonii, Caulerpa lentillifera and Sargassum polycystum

The proximate composition, vitamin C, α-tocopherol, dietary fibers, minerals, fatty acid and amino acid profiles of three tropical edible seaweeds, Eucheuma cottonii (Rhodophyta), Caulerpa lentillifera (Chlorophyta) and Sargassum polycystum (Phaeophyta) were studied. The seaweeds were high in ash (37.15–46.19%) and dietary fibers (25.05–39.67%) and low in lipid content (0.29–1.11%) on dry weight (DW) basis. These seaweeds contained 12.01–15.53% macro-minerals (Na, K, Ca and Mg) and 7.53–71.53 mg.100 g⁻¹ trace minerals (Fe, Zn, Cu, Se and I). The crude protein content of E. cottonii (9.76% DW) and C. lentillifera (10.41% DW) were higher than that of S. polycystum (5.4% DW), and protein chemical scores are between 20 and 67%. The PUFA content of E. cottonii was 51.55%, C. lentillifera 16.76% and S. polycystum 20.34%. Eicosapentaenoic acid (EPA), accounted for 24.98% of all fatty acids in E. cottonii. These seaweeds have significant vitamin C (∼35 mg.100 g⁻¹) and α-tocopherol (5.85–11.29 mg.100 g⁻¹) contents.     

Change in colony morphology and kinetics of tylosin production after UV and gamma irradiation mutagenesis of Streptomyces fradiae NRRL-2702

Tylosin is a macrolide antibiotic used as veterinary drug and growth promoter. Attempts were made for hyper production of tylosin by a strain of Streptomyces fradiae NRRL-2702 through irradiation mutagenesis. Ultraviolet (UV) irradiation of wild-type strain caused development of six morphologically altered colony types on agar plates. After screening using Bacillus subtilis bioassay only morphological mutants indicated the production of tylosin. An increase of 2.7±0.22-fold in tylosin production (1500 mg/l) in case of mutant UV-2 in complex medium was achieved as compared to wild-type strain (550 mg/l). Gamma irradiation of mutant UV-2 using ⁶⁰Co gave one morphologically altered colony type γ-1, which gave 2500 mg/l tylosin yield in complex medium. Chemically defined media promoted tylosin production upto 3800 mg/l. Maximum value of q_p (3.34 mg/gh) was observed by mutant γ-1 as compared to wild strain (0.81 mg/gh). Moreover, UV irradiation associated changes were unstable with loss of tylosin activity whereas mutant γ-1 displayed high stability on subsequent culturing.     

Characterisation of Phenolics in Flor‐Essence®—a Compound Herbal product and its Contributing Herbs

Introduction – Commercially available herbal mixture FE, a proprietary natural health product manufactured by Flora Manufacturing and Distributing Ltd (Flora), is a unique North American traditional herbal product. FE is a chemically complex mixture of eight herbs and has not been subjected to phytochemical analysis. Objective – To develop analytical methods to undertake detailed phytochemical analyses of FE, and its eight contributing herbs, including burdock (Arctium lappa L.), sheep sorrel (Rumex acetosella L.), Turkish rhubarb (Rheum palmatum L.), slippery elm Muhl. (Ulmus rubra), watercress (Nasturtium officinale R. Br.), red clover (Trifolium pratense L.), blessed thistle (Cnicus benedictus L.) and kelp (Laminaria digitata Lmx.). Methodology – The identification was undertaken by a combination of reversed phase high performance liquid chromatography–diode array detection–atmospheric pressure chemical ionisation–mass selective detection (RP‐HPLC‐DAD‐APCI‐MSD) analysis and phenolics metabolomic library matching. Results – New separation methods facilitated the identification of 43 markers in the individual herbs which constitute FE. Sixteen markers could be identified in FE originating from four contributing herbs including four caffeoyl quinic acids, three dicaffeoyl quinic acids and two caffeic acid derivatives from A. lappa, luteolin‐7‐O‐glucoside, luteolin, five apigenin glycosides and apigenin from R. acetocella and N. officinale and sissostrin from T. pretense. A validated method for quantitative determination of three markers is reported with good intraday, interday and interoperator repeatability using a reliable alcohol based extraction technique. Conclusion – FE and its contributing herbs predominantly contain phenolics. This methodology can be applied to further develop full‐scale validation of this product. Copyright © 2009 John Wiley & Sons, Ltd.     

Extracellular Matrix Stiffness and Architecture Govern Intracellular Rheology in Cancer

Little is known about the complex interplay between the extracellular mechanical environment and the mechanical properties that characterize the dynamic intracellular environment. To elucidate this relationship in cancer, we probe the intracellular environment using particle-tracking microrheology. In three-dimensional (3D) matrices, intracellular effective creep compliance of prostate cancer cells is shown to increase with increasing extracellular matrix (ECM) stiffness, whereas modulating ECM stiffness does not significantly affect the intracellular mechanical state when cells are attached to two-dimensional (2D) matrices. Switching from 2D to 3D matrices induces an order-of-magnitude shift in intracellular effective creep compliance and apparent elastic modulus. However, for a given matrix stiffness, partial blocking of β1 integrins mitigates the shift in intracellular mechanical state that is invoked by switching from a 2D to 3D matrix architecture. This finding suggests that the increased cell-matrix engagement inherent to a 3D matrix architecture may contribute to differences observed in viscoelastic properties between cells attached to 2D matrices and cells embedded within 3D matrices. In total, our observations show that ECM stiffness and architecture can strongly influence the intracellular mechanical state of cancer cells.     

Protocols for nuclei isolation and nuclear protein extraction from the resurrection plant Xerophyta viscosa for proteomic studies

A rapid, simple in vitro test system for high-throughput screening of peroxisome proliferator-activated receptor (PPAR) γ agonists would be of interest for testing new antidiabetic drugs, alternative medicine, or environmental samples. A yeast two-hybrid assay based on the ligand-dependent recruitment of the coactivator CBP (CREB-binding protein) was constructed. In this system PPARγ was constitutively activated and the signal was not further increased significantly by adding agonists. In yeast we identified oleic acid as a putative endogenous ligand. Furthermore yeasts seem to lack regulatory mechanisms present in mammalian cells. Mammalian systems are an alternative for screening PPARγ agonists.     

A lactate biosensor based on lactate dehydrogenase/nictotinamide adenine dinucleotide (oxidized form) immobilized on a conducting polymer/multiwall carbon nanotube composite film

An amperometric lactate biosensor was developed based on a conducting polymer, poly-5,2′-5′,2′′-terthiophene-3′-carboxylic acid (pTTCA), and multiwall carbon nanotube (MWNT) composite on a gold electrode. Lactate dehydrogenase (LDH) and the oxidized form of nicotinamide adenine dinucleotide (NAD⁺) were subsequently immobilized onto the pTTCA/MWNT composite film. The modified electrode was characterized by quartz crystal microbalance (QCM), scanning electron microscopy (SEM), and electrochemical experiments. The detection signal was amplified by the pTTCA/MWNT assembly onto which a sufficient amount of enzyme was immobilized and stabilized by the covalent bond formation between the amine groups of enzyme and the carboxylic acid groups of the pTTCA/MWNT film. Experimental parameters affecting the sensor responses, such as applied potential, pH, and temperature, were assessed and optimized. Analytical performances and dynamic ranges of the sensor were determined, and the results showed that the sensitivity, stability, and reproducibility of the sensor improved significantly using pTTCA/MWNT composite film. The calibration plot was linear (r² = 0.9995) over the range of 5 to 90 μM. The sensitivity was approximately 0.0106 μA/μM, with a detection limit of 1 μM, based on a signal/noise ratio of 3. The applicability of the sensor for the analysis of l-lactate concentration in commercial milk and human serum samples was demonstrated successfully.