Effect of culture conditions on lipolytic enzyme production by Penicillium candidum in a solid state fermentation

Lipolytic enzymes were produced using wheat bran as substrate in a solid state fermentation with Penicillium candidum. The best production of lipolytic activity occurred at 29 degrees C. One hundred micromoles of free butyric acid (FBA) was released from tributyrin by 1 mL of cell free supernatant in the absence of control of environmental relative humidity. When a closed chamber saturated with water vapour was used the lipolytic activity increased to 320 micromoles of free butyric acid. The best initial reaction pH was 7.0. The highest activity, 480 micromoles of FBA, was obtained at a moisture content of 67.5 % of saturation.     

Continuous polyhydroxybutyrate production from biogas in an innovative two-stage bioreactor configuration

Biogas biorefineries have opened up new horizons beyond heat and electricity production in the anaerobic digestion sector. Added-value products such as polyhydroxyalkanoates (PHAs), which are environmentally benign and potential candidates to replace conventional plastics, can be generated from biogas. This work investigated the potential of an innovative two-stage growth-accumulation system for the continuous production of biogas-based polyhydroxybutyrate (PHB) using Methylocystis hirsuta CSC1 as cell factory. The system comprised two turbulent bioreactors in series to enhance methane and oxygen mass transfer: a continuous stirred tank reactor (CSTR) and a bubble column bioreactor (BCB) with internal gas recirculation. The CSTR was devoted to methanotrophic growth under nitrogen balanced growth conditions and the BCB targeted PHB production under nitrogen limiting conditions. Two different operational approaches under different nitrogen loading rates and dilution rates were investigated. A balanced nitrogen loading rate along with a dilution rate (D) of 0.3 day⁻¹ resulted in the most stable operating conditions and a PHB productivity of ~53 g PHB m⁻³ day⁻¹. However, higher PHB productivities (~127 g PHB m⁻³ day⁻¹) were achieved using nitrogen excess at a D = 0.2 day⁻¹. Overall, the high PHB contents (up to 48% w/w) obtained in the CSTR under theoretically nutrient balanced conditions and the poor process stability challenged the hypothetical advantages conferred by multistage vs single-stage process configurations for long-term PHB production.     

Cavity-nesting birds are limited by nesting habitat in Neotropical agricultural landscapes

Most studies comparing biodiversity between natural and human-modified landscapes focus on patterns in species occurrence or abundance, but do not consider how different habitat types meet species' breeding requirements. Organisms that use or nest in tree cavities may be especially threatened by habitat conversion due to the loss of their nesting sites. Although cavity-nesting bird diversity is highest in the tropics, little is known about how tropical birds use cavities, how agriculture affects their reproductive biology, and how effective nest boxes could be as a conservation strategy in tropical agriculture. Here, we explored how habitat conversion from tropical forests to pasture affects the abundance, nesting habitat availability, and nest success of cavity-nesting birds in Northwest Ecuador. We conducted bird surveys and measured natural cavity availability and use in forest and agriculture. We also added artificial nest boxes to forest and agriculture to see whether cavity limitation in agriculture would elicit higher use of artificial nest boxes. We found evidence of cavity limitation in agriculture—there were many more natural cavities in forest than in agriculture, as well as more avian use of nest boxes placed in agriculture as compared to forest. Our results suggest that it is important to retain remnant trees in tropical agriculture to provide critical nesting habitat for birds. In addition, adding nest boxes to tropical agricultural systems could be a good conservation strategy for certain species, including insectivores that could provide pest-control services to farmers. Abstract in Spanish is available with online material.     

Canopy tree mortality depends on the proportion of crown exposed to sunlight,but this effect varies with species' wood density

Understanding what drives changes in tree mortality as well as the covariates influencing trees' response is a research priority to predict forest responses to global change. Here, we combined drone photogrammetry and ground-based data to assess the influence of crown exposure to light (relative to total crown area), growth deviations (relative to conspecifics), tree size, and species' wood density (as a surrogate for light-demanding and shade-tolerant life-history strategies) on the mortality of 984 canopy trees in an Amazon terra firme forest. Trees with lower wood density were less prone to die when their proportion of crown was more exposed to sunlight, but this relationship with relative crown exposure weakened and slightly reversed as wood density increased. Trees growing less than their species average had higher mortality, especially when the species' wood density decreased. The role of wood density in determining the survival of canopy trees under varying light conditions indicates differential responses of light-demanding versus shade-tolerant species. Our results highlight the importance of accounting for life-history strategies, via plant functional types, in vegetation dynamic models aiming to predict forest demography under a rapidly changing climate. Abstract in Spanish is available with online material.     

A novel and high-throughput approach to assess photosynthetic thermal tolerance of kelp using chlorophyll α fluorometry

Foundation seaweed species are experiencing widespread declines and localized extinctions due to increased instability of sea surface temperature. Characterizing temperature thresholds are useful for predicting patterns of change and identifying species most vulnerable to extremes. Existing methods for characterizing seaweed thermal tolerance produce diverse metrics and are often time-consuming, making comparisons between species and techniques difficult, hindering insight into global patterns of change. Using three kelp species, we adapted a high-throughput method – previously used in terrestrial plant thermal biology – for use on kelps. This method employs temperature-dependent fluorescence (T–F₀) curves under heating or cooling regimes to determine the critical temperature (T_crit) of photosystem II (PSII), i.e., the breakpoint between slow and fast rise fluorescence response to changing temperature, enabling rapid assays of photosynthetic thermal tolerance using a standardized metric. This method enables characterization of T_crit for up to 48 samples per two-hour assay, demonstrating the capacity of T–F₀ curves for high-throughput assays of thermal tolerance. Temperature-dependent fluorescence curves and their derived metric, T_crit, may offer a timely and powerful new method for the field of phycology, enabling characterization and comparison of photosynthetic thermal tolerance of seaweeds across many populations, species, and biomes.     

Strain distribution pattern in AXB and BXA recombinant inbred strains for loci on murine Chromosomes 10, 13, 17, and 18

Strain distribution patterns (SDPs) of selected loci previously mapped to murine Chromosomes (Chrs) 10, 13, 17, and 18 are reported for the AXB, BXA recombinant inbred (RI) strain set derived from the progenitor strains A/J (A) and C57BL/6J (B). The loci included the simple sequence length polymorphisms (D10Nds1, D10Mit2, D10Mit10, D10Mit14, D13Mit3, D13Nds1, D13Mit10, D13Mit13, D13Mit7, D13Mit11, D17Mit18, D17Mit10, D17Mit20, D17Mit3, D17Mit2, D18Mit17, D18Mit9, and D18Mit4), the restriction fragment length polymorphisms Pdea and Csfmr, and the biochemical marker AS-1. These loci were chosen because they map to genomic regions that had few or no genetic markers in the AXB, BXA RI set. Several of these loci also were typed in backcross progeny of matings of the (AXB)F₁ to strain A or B. The strain distribution patterns for chromosomes 10, 13, 17, and 18 are reported, and the gene order and map distances determined from the backcross data. The addition of these markers to the AXB, BXA RI strain set increases the genomic region over which linkage for new markers can be detected.     

First report of Garella musculana (Erschov, 1874) (Lepidoptera: Nolidae) in Italy with insights into its identity

The Asian walnut moth, Garella musculana (Erschov, 1874) (Lepidoptera: Nolidae), is a major pest of walnut. Native to Central Asia, it was found to be invasive in 2008 in Sevastopol (Crimea) and nowadays widespread in Turkey, Bulgaria, Romania and Russia. Here, we account for the finding of G. musculana in NE Italy (Veneto region) in 2021, where adults were found in a light lamp, representing the first record of the Asian walnut moth for this country and Western Europe. Adult specimens were identified morphologically on both external characters and genitalia features. G. musculana larvae and damage were also observed on a plantation of Juglans regia L. (Fagales: Juglandaceae) located in Veneto in October 2021. A COI-barcoding analysis was performed to attain a molecular characterization of our specimens and probate our morphological identification. However, because no sequence of G. musculana was present in major gene databases and the similarity of our sequences with those attributed to Garella ruficirra (Hampson, 1905) (Lepidoptera: Nolidae) made clear that these taxa deserved further scrutiny regarding their specific distinction. Some subtle differences in the male terminalia could be found between them and their vast geographic distributions, but the strong similarity in most features calls for further morphological and genetical insights on a broad set of samples to assess whether they represent two closely related, substantially parapatric species, or a unique, geographically varying entity. Solving this issue may turn out crucial in the identification and proper management of walnut moths of the genus Garella.     

The Prevention Effect of Bacillus subtilis on Escherichia coli–Induced Mastitis in Mice by Suppressing the NF-κB and MAPK Signaling Pathways

Probiotics and Antimicrobial Proteins - Mastitis, common inflammation of the mammary gland, caused by various factors, is a challenge for the dairy industry. Escherichia coli (E. coli), a...     

A chromosome-level genome assembly enables the identification of the follicule stimulating hormone receptor as the master sex-determining gene in the flatfish Solea senegalensis

Sex determination (SD) shows huge variation among fish and a high evolutionary rate, as illustrated by the Pleuronectiformes (flatfishes). This order is characterized by its adaptation to demersal life, compact genomes and diversity of SD mechanisms. Here, we assembled the Solea senegalensis genome, a flatfish of great commercial value, into 82 contigs (614 Mb) combining long- and short-read sequencing, which were next scaffolded using a highly dense genetic map (28,838 markers, 21 linkage groups), representing 98.9% of the assembly. Further, we established the correspondence between the assembly and the 21 chromosomes by using BAC-FISH. Whole genome resequencing of six males and six females enabled the identification of 41 single nucleotide polymorphism variants in the follicle stimulating hormone receptor (fshr) consistent with an XX/XY SD system. The observed sex association was validated in a broader independent sample, providing a novel molecular sexing tool. The fshr gene displayed differential expression between male and female gonads from 86 days post-fertilization, when the gonad is still an undifferentiated primordium, concomitant with the activation of amh and cyp19a1a, testis and ovary marker genes, respectively, in males and females. The Y-linked fshr allele, which included 24 nonsynonymous variants and showed a highly divergent 3D protein structure, was overexpressed in males compared to the X-linked allele at all stages of gonadal differentiation. We hypothesize a mechanism hampering the action of the follicle stimulating hormone driving the undifferentiated gonad toward testis.     

An electrogenetic toggle switch model

Synthetic biology uses molecular biology to implement genetic circuits that perform computations. These circuits can process inputs and deliver outputs according to predefined rules that are encoded, often entirely, into genetic parts. However, the field has recently begun to focus on using mechanisms beyond the realm of genetic parts for engineering biological circuits. We analyse the use of electrogenic processes for circuit design and present a model for a merged genetic and electrogenetic toggle switch operating in a biofilm attached to an electrode. Computational simulations explore conditions under which bistability emerges in order to identify the circuit design principles for best switch performance. The results provide a basis for the rational design and implementation of hybrid devices that can be measured and controlled both genetically and electronically.