Force spectroscopy of the leukocyte function-associated antigen-1/intercellular adhesion molecule-1 interaction

Interactions between leukocyte function-associated antigen-1 (LFA-1) with its cognate ligand, intercellular adhesion molecule-1 (ICAM-1) play a crucial role in leukocyte adhesion. Because the cell and its adhesive components are subject to external perturbation from the surrounding flow of blood, it is important to understand the binding properties of the LFA-1/ICAM-1 interaction in both steady state and in the presence of an external pulling force. Here we report on atomic force microscopy (AFM) measurements of the unbinding of LFA-1 from ICAM-1. The single molecule measurements revealed the energy landscape corresponding to the dissociation of the LFA-1/ICAM-1 complex and provided the basis for defining the energetic determinants of the complex at equilibrium and under the influence of an external force. The AFM force measurements were performed in an experimental system consisting of an LFA-1-expressing T cell hybridoma, 3A9, attached to the end of the AFM cantilever and an apposing surface expressing ICAM-1. In measurements covering three orders of magnitude change in force loading rate, the LFA-1/ICAM-1 force spectrum (i.e., unbinding force versus loading rate) revealed a fast and a slow loading regime that characterized a steep inner activation barrier and a wide outer activation barrier, respectively. The addition of Mg(2+), a cofactor that stabilizes the LFA-1/ICAM-1 interaction, elevated the unbinding force of the complex in the slow loading regime. In contrast, the presence of EDTA suppressed the inner barrier of the LFA-1/ICAM-1 complex. These results suggest that the equilibrium dissociation constant of the LFA-1/ICAM-1 interaction is regulated by the energetics of the outer activation barrier of the complex, while the ability of the complex to resist a pulling force is determined by the divalent cation-dependent inner activation barrier.     

NMR structure of free RGS4 reveals an induced conformational change upon binding Galpha

Heterotrimeric guanine nucleotide-binding proteins (G-proteins) are transducers in many cellular transmembrane signaling systems where regulators of G-protein signaling (RGS) act as attenuators of the G-protein signal cascade by binding to the Galpha subunit of G-proteins (G(i)(alpha)(1)) and increasing the rate of GTP hydrolysis. The high-resolution solution structure of free RGS4 has been determined using two-dimensional and three-dimensional heteronuclear NMR spectroscopy. A total of 30 structures were calculated by means of hybrid distance geometry-simulated annealing using a total of 2871 experimental NMR restraints. The atomic rms distribution about the mean coordinate positions for residues 5-134 for the 30 structures is 0.47 +/- 0.05 A for the backbone atoms, 0. 86 +/- 0.05 A for all atoms, and 0.56 +/- 0.04 A for all atoms excluding disordered side chains. The NMR solution structure of free RGS4 suggests a significant conformational change upon binding G(i)(alpha)(1) as evident by the backbone atomic rms difference of 1. 94 A between the free and bound forms of RGS4. The underlying cause of this structural change is a perturbation in the secondary structure elements in the vicinity of the G(i)(alpha)(1) binding site. A kink in the helix between residues K116-Y119 is more pronounced in the RGS4-G(i)(alpha)(1) X-ray structure relative to the free RGS4 NMR structure, resulting in a reorganization of the packing of the N-terminal and C-terminal helices. The presence of the helical disruption in the RGS4-G(i)(alpha)(1) X-ray structure allows for the formation of a hydrogen-bonding network within the binding pocket for G(i)(alpha)(1) on RGS4, where RGS4 residues D117, S118, and R121 interact with residue T182 from G(i)(alpha)(1). The binding pocket for G(i)(alpha)(1) on RGS4 is larger and more accessible in the free RGS4 NMR structure and does not present the preformed binding site observed in the RGS4-G(i)(alpha)(1) X-ray structure. This observation implies that the successful complex formation between RGS4 and G(i)(alpha)(1) is dependent on both the formation of the bound RGS4 conformation and the proper orientation of T182 from G(i)(alpha)(1). The observed changes for the free RGS4 NMR structure suggest a mechanism for its selectivity for the Galpha-GTP-Mg(2+) complex and a means to facilitate the GTPase cycle.     

Analysis by NMR spectroscopy of the structural homology between the linear and the cyclic peptide recognized by anti-human leukocyte antigen class I monoclonal antibody TP25.99*

The anti-human leukocyte antigen (HLA) class I monoclonal antibody (mAb) TP25.99 has a unique specificity since it recognizes both a conformational and a linear determinant expressed on the beta(2)-mu-associated and beta(2)-mu-free HLA class I heavy chains, respectively. Previously, we reported the identification of a cyclic and a linear peptide that inhibits mAb TP25.99 binding to the beta(2)-mu-associated and beta(2)-mu-free HLA class I heavy chains (S. A. Desai, X. Wang, E. J. Noronha, Q. Zhou, V. Rebmann, H. Grosse-Wilde, F. J. Moy, R. Powers, and S. Ferrone, submitted for publication). The linear X(19) and cyclic LX-8 peptides contain sequence homologous to residues 239-242, 245, and 246 and to residues 194-198, respectively, of HLA class I heavy chain alpha(3) domain. Analysis by two-dimensional transfer nuclear Overhauser effect spectroscopy of the induced solution structures of the linear X(19) and cyclic LX-8 peptides in the presence of mAb TP25.99 showed that the two peptides adopt a similar structural motif despite the lack of sequence homology. The backbone fold is suggestive of a short helical segment followed by a tight turn, reminiscent of the determinant loop region (residues 194-198) on beta(2)-mu-associated HLA class I heavy chains. The structural similarity between the linear X(19) and cyclic LX-8 peptides and the lack of sequence homology suggests that mAb TP25.99 predominantly recognizes a structural motif instead of a consensus sequence.     

Tests of continuum theories as models of ion channels. I. Poisson-Boltzmann theory versus Brownian dynamics

Continuum theories of electrolytes are widely used to describe physical processes in various biological systems. Although these are well-established theories in macroscopic situations, it is not clear from the outset that they should work in small systems whose dimensions are comparable to or smaller than the Debye length. Here, we test the validity of the mean-field approximation in Poisson-Boltzmann theory by comparing its predictions with those of Brownian dynamics simulations. For this purpose we use spherical and cylindrical boundaries and a catenary shape similar to that of the acetylcholine receptor channel. The interior region filled with electrolyte is assumed to have a high dielectric constant, and the exterior region representing protein a low one. Comparisons of the force on a test ion obtained with the two methods show that the shielding effect due to counterions is overestimated in Poisson-Boltzmann theory when the ion is within a Debye length of the boundary. As the ion gets closer to the boundary, the discrepancy in force grows rapidly. The implication for membrane channels, whose radii are typically smaller than the Debye length, is that Poisson-Boltzmann theory cannot be used to obtain reliable estimates of the electrostatic potential energy and force on an ion in the channel environment.     

A new species of Pliopithecus Gervais, 1849 (Primates: Pliopithecidae) from the Middle Miocene (MN8) of Abocador de Can Mata (els Hostalets de Pierola,Catalonia, Spain)

Pliopithecus (Pliopithecus) canmatensis sp. nov. is described from several Late Aragonian localities from Abocador de Can Mata (ACM) in els Hostalets de Pierola (Vallès‐Penedès Basin, Catalonia, Spain), spanning from ～11.7 to 11.6 Ma (C5r.3r subchron), and being correlated to the MN8 (reference locality La Grive L3). The ACM remains display a pliopithecine dental morphology with well‐developed pliopithecine triangles on M/2 and M/3. This, together with other occlusal details, negates an attribution to the subgenus Epipliopithecus. Although slightly smaller, the ACM remains are most similar in size to comparable elements of P. piveteaui and P. antiquus. Several occlusal details (such as the greater development of the buccal cingulid in lower molars) and dental proportions (M/3 much longer than M/2), however, indicate greater similarities with P. antiquus from Sansan and La Grive. The ACM remains, however, differ from P. antiquus in dental proportions as well as occlusal morphology of the lower molars (including the less peripheral position of the protoconid and more medial position of the hypoconulid, the more mesial position of the buccal cuspids as compared to the lingual ones, the narrower but distinct mesial fovea, the higher trigonid, and the more extensive buccal cingulid, among others). These differences justify a taxonomic distinction at the species level of the ACM pliopithecid remains with respect to P. antiquus. Previous pliopithecid findings from the Vallès‐Penedès Basin, previously attributed to P. antiquus, are neither attributable to the latter species nor to the newly erected one. Am J Phys Anthropol, 2010. © 2009 Wiley‐Liss, Inc.     

<Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> inhibits <Emphasis Type="Italic">in-vitro Candida</Emphasis> biofilm development

Background  

Elucidation of the communal behavior of microbes in mixed species biofilms may have a major impact on understanding infectious diseases and for the therapeutics. Although, the structure and the properties of monospecies biofilms and their role in disease have been extensively studied during the last decade, the interactions within mixed biofilms consisting of bacteria and fungi such as Candida spp. have not been illustrated in depth. Hence, the aim of this study was to evaluate the interspecies interactions of Pseudomonas aeruginosa and six different species of Candida comprising C. albicans, C. glabrata, C. krusei, C. tropicalis, C. parapsilosis, and C. dubliniensis in dual species biofilm development.     

Profiling of membrane protein variants in a baculovirus system by coupling cell-surface detection with small-scale parallel expression

Production of structure-grade mammalian membrane proteins in substantial quantities has been hindered by a lack of methods for effectively profiling multiple constructs expression in higher eukaryotic systems such as insect or mammalian cells. To address this problem, a specialized small-scale eukaryotic expression platform by Thomson Instrument Company (Vertiga-IM) was developed and used in tandem with a Guava EasyCyte microcapillary 96-well cytometer to monitor cell density and health and evaluate membrane protein expression. Two proof of concept experiments were conducted using the human beta(2)-adrenergic receptor (beta(2)AR) and the gap junction protein connexin26 (Cx26) in a baculovirus expression system. First, cell surface expression was used to assess the expression levels of 14 beta(2)AR truncation variants expressed using the Vertiga-IM shaker. Three of these variants were then compared to wild-type beta(2)AR using three metrics: cell surface expression, saturation ligand binding and protein immunoblot analysis of dodecylmaltoside extracted material. Second, a series of systematic Cx26 truncation variants were evaluated for expression by protein immunoblot analysis. The cumulative results for these two systems show that the Vertiga-IM instrument can be used effectively in the parallel insect cell microexpression of membrane protein variants, and that the expression of cell surface molecules as monitored with the Guava EasyCyte instrument can be used to rapidly assess the production of properly folded proteins in the baculovirus expression system. This approach expedites the in vitro evaluation of a large number of mammalian membrane protein variants.