144 Sculpting light with DNA origami

We used the DNA origami method (Rothemund, 2006) for the fabrication of self-assembled nanoscopic materials (Seeman, 2010). In DNA origami, a virus-based 8?kilobase-long DNA single-strand is folded into shape with the help of ～ 200 synthetic oligonucleotides. The resulting DNA nanostructures can be designed to adopt any three-dimensional shape and can be addressed through DNA hybridization or chemical modification with nanometer precision. We have realized that complex assemblies of nanoparticles, including magnetic, fluorescent, and plasmonic nanoparticles. Such nanoconstructs may exhibit striking optical properties such as strong optical activity in the visible range (Kuzyk et al., 2012). To this end, plasmonic particles were assembled in solution to form helices of controlled handedness. We achieved spatial control over particle placement better than 2?nm and attachment yields of 97% and above. As a collective optical response emerging from our dispersed nanostructures, we detected pronounced circular dichroism (CD) originating from the plasmon–plasmon interactions in the particle helices. In recent experiments, we were able to show that the optical response of chiral biomolecules can be transferred from the UV into the visible region in plasmonic hotspots. Thus, sensitive detection of chiral biomolecules may become feasible in the near future. We also found that the orientation of the helices in respect to the incoming light beam critically influences the resulting CD spectra. Our results can be explained with theoretical models based on plasmonic dipole interaction and demonstrate the potential of DNA origami for the assembly of metafluids with designed optical properties.     

Comparison of Complex DNA Mixtures with Generic Oligonucleotide Microchips

Abstract

The reproducibility of melting curves for repeated hybridizations of target DNA with generic oligonucleotide microchips is shown experimentally to depend on the character of matching between fragments of target DNA and immobilized oligonucleotides. The reproducibility of melting curves is higher for the perfect match duplexes and decreases as the number of mismatched pairs within duplexes increases. This effect was applied to the comparative analysis of complex DNA mixtures. We developed a scheme in which we can identify and discriminate between the probe oligonucleotides responsible for the distinctions between target DNA mixtures. A scheme is illustrated by comparing DNA mixtures corresponding to VD-J genes connected with populations of mRNAs CDR3 TCR Vb (T-cell receptor beta complementarity determining region 3) from the thymus and pancreas of NOD mice. Our results demonstrate that generic microchips can be applied efficiently to the analysis of DNA mixtures.     

Atomic Force Microscopy Imaging of Double Stranded DNA and RNA

Abstract

A procedure for imaging long DNA and double stranded RNA (dsRNA) molecules using Atomic Force Microscopy (AFM) is described. Stable binding of double stranded DNA molecules to the flat mica surface is achieved by chemical modification of freshly cleaved mica under mild conditions with 3-aminopropyltriethoxy silane. We have obtained striking images of intact lambda DNA, Hind III restriction fragments of lambda DNA and dsRNA from reovirus. These images are stable under repeated scanning and measured contour lengths are accurate to within a few percent. This procedure leads to strong DNA attachment, allowing imaging under water. The widths of the DNA images lie in the range of 20 to 80nm for data obtained in air with commercially available probes. The work demonstrates that AFM is now a routine tool for simple measurements such as a length distribution. Improvement of substrate and sample preparation methods are needed to achieve yet higher resolution.     

Melting of Cross-Linked DNA IV. Methods for Computer Modeling of Total Influence on DNA Melting of Monofunctional Adducts,Intrastrand and Interstrand Cross-Links Formed by Molecules of an Antitumor Drug

Abstract

A theoretical method is developed for calculation of melting curves of covalent complexes of DNA with antitumor drugs. The method takes into account all the types of chemical modifications of the double helix caused by platinum compounds and DNA alkylating agents: 1) monofunctional adducts bound to one nucleotide; 2) intrastrand cross-links which appear due to bidentate binding of a drug molecule to two nucleotides that are included into the same DNA strand; 3) interstrand cross-links caused by bidentate binding of a molecule to two nucleotides of different strands. The developed calculation method takes into account the following double helix alterations at sites of chemical modifications: 1) a change in stability of chemically modified base pairs and neighboring ones, that is caused by all the types of chemical modifications; 2) a change in the energy of boundaries between helical and melted regions at sites of chemical modification (local alteration of the factor of cooperativity of DNA melting), that is caused by all the types of chemical modifications, too; 3) a change in the loop entropy factor of melted regions that include interstrand cross-links; 4) the prohibition of divergence of DNA strands in completely melted DNA molecules, which is caused by interstrand cross-links only. General equations are derived, and three calculation methods are proposed to calculate DNA melting curves and the parameters that characterize the helix-coil transition.     

Structural analysis of the envelope gp120 V3 loop for some HIV-1 variants circulating in the countries of Eastern Europe

The V3 loop on gp120 from human immunodeficiency virus type 1 (HIV-1) is a focus of many research groups involved in anti-AIDS drug development because this region of the protein is a principal target for neutralizing antibodies and a major determinant for cell tropism and syncytium formation. In this study, the nucleotide sequences of the env gene region coding the V3 loop were determined by DNA sequencing methods for four novel HIV-1 strains that circulate in the countries of Eastern Europe, such as Russia, Belarus, Ukraine, etc. Based on the empirical data obtained, the 3D structures of the V3 loops associated with these viral modifications were generated by computer modeling and then compared to discover similarities in the spatial arrangement of this functionally important site of gp120. Despite the HIV-1 genetic variety, several regions of the V3 loop that contain residues critical for cell tropism were shown to be structurally invariant, which may explain its exceptional role in a co-receptor usage. These data together with those on the biological activity of the V3 individual residues clearly show that these conserved structural motifs of gp120 represent potential HIV-1 weak points most suitable for therapeutic intervention.     

Melting of Cross-Linked DNA V. Cross-Linking Effect Caused by Local Stabilization of the Double Helix

Abstract

DNA interstrand cross-links are usually formed due to bidentate covalent or coordination binding of a cross-linking agent to nucleotides of different strands. However interstrand linkages can be also caused by any type of chemical modification that gives rise to a strong local stabilization of the double helix. These stabilized sites conserve their helical structure and prevent local and total strand separation at temperatures above the melting of ordinary AT and GC base pairs. This local stabilization makes DNA melting fully reversible and independent of strand concentration like ordinary covalent interstrand cross-links. The stabilization can be caused by all the types of chemical modifications (interstrand cross-links, intrastrand cross-links or monofunctional adducts) if they give rise to a strong enough local stabilization of the double helix. Our calculation demonstrates that an increase in stability by 25 to 30 kcal in the free energy of a single base pair of the double helix is sufficient for this “cross-linking effect” (i.e. conserving the helicity of this base pair and preventing strand separation after melting of ordinary base pairs). For the situation where there is more then one stabilized site in a DNA duplex (e.g., 1 stabilized site per 1000 bp), a lower stabilization per site is sufficient for the “cross-linking effect” (18–20 kcal). A substantial increase in DNA stability was found in various experimental studies for some metal-based anti-tumor compounds. These compounds may give rise to the effect described above. If ligand induced stabilization is distributed among several neighboring base pairs, a much lower minimum increase per stabilized base pair is sufficient to produce the cross-linking effect (1 bp- 24.4 kcal; 5 bp- 5.3 kcal; 10 bp- 2.9 kcal, 25 bp- 1.4 kcal; 50 bp- 1.0 kcal). The relatively weak non-covalent binding of histones or protamines that cover long regions of DNA (20–40 bp) can also cause this effect if the salt concentration of the solution is sufficiently low to cause strong local stabilization of the double helix. Stretches of GC pairs more than 25 bp in length inserted into poly(AT) DNA also exhibit properties of stabilizing interstrand cross-links.     

Spawning, egg development and early ontogenesis in rock cod Patagonotothen ramsayi (Regan, 1913) caught on the Patagonian Shelf and maintained in captivity

Rock cod Patagonotothen ramsayi (Regan, 1913) is one of the most abundant fish of the family Nototheniidae inhabiting the Patagonian Shelf and upper Slope in the southwest Atlantic. Recently, P. ramsayi became an important commercial species around the Falkland Islands with annual catch of 60,000–75,000 t. The present study aimed to reveal previously unknown aspects of reproductive biology of P. ramsayi during the first successful maintenance of adults for more than a year in an aquaculture facility with running seawater. The fish spawned at the end of austral winter. During spawning, males changed their coloration dramatically, occupied artificial shelters on the bottom and showed aggressive territorial behaviour. Egg masses were light-yellow to light-orange irregular spongiform. They were negatively buoyant, but located outside shelters and were ignored by males. Egg diameters varied between 2.1 and 2.3 mm, and the number of eggs per egg mass ranged from 26,800 to 123,400. Embryogenesis lasted 28–32 days. Total lengths of newly hatched larvae ranged from 6.2 to 6.7 mm. The yolk sac feeding period lasted approximately 11 days, during which the larvae showed negative phototaxis. One-month-old larvae attained 8.8–9.0 mm in length. This study confirms that P. ramsayi exhibit the reproductive strategy typical for nototheniid species occupying low-latitude peripheries of their distributional range, characterised by a combination of r-features (small eggs and larvae, high fecundity) and K-features (territorial behaviour and possible nest guarding).     

Topology,glycosylation and conformational changes in the membrane domain of the vacuolar H+‐ATPase a subunit

Published topological models of the integral membrane a subunit of the vacuolar proton‐translocating ATPase complex have not been in agreement with respect to either the number of transmembrane helices within the integral membrane domain, or their limits and orientations within the lipid bilayer. In the present work we have constructed a predictive model of the membrane insertion of the yeast a subunit, Vph1p, from a consensus of seven topology prediction algorithms. The model was tested experimentally using epitope tagging, green fluorescent protein fusion, and protease accessibility analysis in purified yeast vacuoles. Results suggest that a consensus prediction of eight transmembrane helices with both the amino‐terminus and carboxyl‐terminus in the cytoplasm is correct. Characterization of two glycosylation sites within the homologous mouse a subunit membrane domain further corroborates this topology. Moreover, the model takes into account published data on cytoplasmic and luminal accessibility of specific amino acids. Changes in the degree of protease accessibility in response to the V‐ATPase substrate, MgATP, and the V‐ATPase‐specific inhibitor, concanamycin A, suggest that functional conformational changes occur in the large cytoplasmic loop between TM6 and TM7 of Vph1p. These data substantially confirm one topological model of the V‐ATPase a subunit and support the notion that conformational changes occur within the membrane domain, possibly involving previously proposed axial rotation and/or linear displacement of TM7 in the proton transport cycle. J. Cell. Biochem. 114: 1474–1487, 2013. © 2013 Wiley Periodicals, Inc.     

Morphology of the jaw apparatus in 8 species of Patellogastropoda (Mollusca, Gastropoda) with special reference to Testudinalia tesulata (Lottiidae)

The fine structure of the jaw apparatus was studied by scanning electron microscopy in eight species of Patellogastropoda. The jaw apparatus is an unpaired two-layered dorsolateral structure with anterior and posterior wings attached to the odontophore by muscles. The jaw of Testudinalia tesulata (O.F. Müller, 1776) is a derivative of the cuticle typical for the foregut. The tissue forming the jaw is a specialized foregut epithelium (gnathoepithelium), consisting of a special type of cells called gnathoblasts. The jaw grows in areas of the epithelium characterized by high concentration of electron-dense vesicles, ER and long microvilli that penetrate deep into the jaw plate. This indicates that the gnathoblasts take an active part in jaw growth. In most cases, these areas of the gnathoepithelium are highly folded. The main differences between the species studied are form and thickness of the frontal edge of the jaw. These differences do not correlate with the systematic position of the species studied but likely depend more on the feeding mode. The transmission electron microscopy studies yielded new morphological criteria for comparison between various gastropod species and other members of Trochozoa, in particular, Annelida. The jaws of Annelida are cuticular structures formed on the surface of specialized epithelial cells, often also called gnathoblasts. The jaw of Patellogastropoda can be attributed to the first type of annelid jaw formation characterized by an epithelium with long microvilli and continuous growth.     

Human Core Temperature Responses during Exercise and Subsequent Recovery: An Important Interaction between Diurnal Variation and Measurement Site

Chronobiological investigations into core temperature during and after exercise can involve ambulatory measurements of intestinal temperature during actual competitions, esophageal temperature measurements in laboratory simulations, or rectal temperature, which can be measured in both the field and laboratory. These sites have yet to be compared during both morning and afternoon exercise and subsequent recovery. At 08∶00 and 17∶00 h, seven recreationally active males exercised at 70% peak oxygen uptake for 30 min and then recovered passively for 30 min. During the experiment, esophageal, rectal, intestinal, and skin temperatures, plus sweat loss, heart rate, and ratings of perceived exertion (RPE), were monitored. We found that the diurnal variation in intestinal temperature responses (0.45±0.32°C; mean±SD) was significantly larger compared with rectal (0.33±0.24°C) and, particularly, esophageal temperature responses (0.21±0.20°C; p= 0.019). This reflected a greater difference of 0.25–0.40°C between the esophagus and the other two sites in the afternoon, compared to inter‐site differences of only 0.13–0.16°C in the morning. Diurnal variation was small for skin temperature, heart rate, sweat loss, and RPE responses during exercise (p>0.05). Our data suggest that the relative differences between intestinal, rectal, and esophageal temperature during exercise and subsequent recovery depend on time of day to the extent that inferences from studies on experimental and applied chronobiology will be affected.