Characterization of gluconeogenesis in hepatocytes isolated from the American eel,Anguilla rostrata LeSueur,

Summary Isolated hepatocyte preparations from fed immature American eels,Anguilla rostrata Le Sueur, were used to study gluconeogenic, lipogenic, glycogenic and oxidative rates of radioactively labelled lactate, glycerol, alanine and aspartate. Eel hepatocytes maintain membrane integrity and energy charge during a 2 h incubation period and are considered a viable preparation for studying fish liver metabolism.Incubating eel hepatocytes with 10 mM substrates, the following results were obtained: glycerol, alanine and lactate, in that order, were effective gluconeogenic substrates; these three substrates reduced glucose release from glycogen stores, while aspartate had no such effect; lactate, alanine and aspartate led to high rates of glycerol production, with subsequent incorporation into lipid; incorporation into glycogen was low from all substrates; and, alanine oxidation was seven times higher than that observed with other substrates.When eel hepatocytes were incubated with low or physiological substrate concentrations gluconeogenic rates from lactate were twice those from alanine; rates from aspartate were very low. Glucagon stimulated lactate gluconeogenesis, but not amino acid gluconeogenesis, and had no significant effect on glycogenolysis. Cortisol increased gluconeogenic rates from 1 mM lactate.Thus, in the presence of adequate substrate, eel liver gluconeogenesis is preferentially stimulated relative to glycogenolysis to produce plasma glucose. These data support three important roles for gluconeogenesis: the recycling of muscle lactate, the synthesis of glucose from dietary amino acids to supplement glucose levels, and the production of glycerol for lipogenesis.This work was supported from operating grants to TWM from the National Research Council of Canada (A6944)     

Transference numbers, polyion mobilities, and charge fractions in aqueous solutions of lithium, sodium, and potassium dextransulfate

Results of Hittorf type transference number measurements are reported for aqueous solutions of lithium, sodium, and potassium dextransulfate (DS) in the concentration range 0.008-0.09 moles of sulfate groups per liter. The results for the polyion transference number are combined with equivalent conductance measurements reported earlier to calculate the polyion equivalent conductance, and the polyion charge fraction based on Wall's method. Our results show that the transference number of this high charge density polyion is larger than unity over the entire concentration range studied, and decreases monotonously with increasing concentration. The calculated charge fraction f of the polyion increases with increasing concentration, and at any concentration/decreases in the order LiDS > NaDS > KDS. A comparison between the conclusions derived from these transport experiments and from both mean and single ion activity measurements in dextransulfate solutions shows the considerable uncertainties involved in either of these methods, and emphasizes the need for the application of a variety of techniques, including spectroscopic techniques, to determine differential ion binding by polyions.     

Studies onSargassum

Summary Cytological comparisons of homologous tissues in blades and stipes by stereological analysis have shown differences exist between blade and stipe organs inSargassum. Based on measurements of total thylakoid and cristae membrane surface areas in these organs blades were found to contain 61% more thylakoid membrane surface and 65% more cristae membrane than stipes on a per unit volume basis. Assuming photosynthesis and respiration are directly related to the surface area of the internal membranes in the respective organelles it is possible to predict that blades will have a 61% greater photosynthetic and a 65% greater respiratory potential. Photosynthetic and respiratory rates for blades and stipes were determined manometrically and show a 62% greater photosynthetic and 59% greater respiratory rates for the blade tissues agreeing very well with predicted values.Present evidence indicates that photosynthetic and respiratory rate differences observed in the blades and stipes inSargassum are the result of increased membrane surface areas in the larger cells of the tissues which make up the blade. The basic cell structure,i.e., the percent volume of cell cytoplasm occupied by each organelle, is similar in homologous tissues of both organs regardless of cell size. Therefore physiological differences between the two organs are primarily due to changes in cell size and not in basic cell construction. This provides an interesting mechanism for producing physiological differences without changing basic cell structure in the organs of this plant.     

The binding of divalent metal ions to polyelectrolytes in mixed counterion systems. I. The dye spectrophotometric method

The dye spectrophotometric method for the measurement of the activity of divalent metal ions in polyelectrolyte solutions containing added electrolytes is discussed.The method is applied to mixtures containing the dextransulfate polyanion, NaCl, and MgCl2 or Ca2. A two wavelength ratio method as applied to polyelectrolyte solutions is compared to the standard method which makes use of the previous determination of the dye-metal ion formation constant. The ratio method is found to be a convenient and reliable method which is not influenced by decomposition of the dye or by statistical errors in the extrapolation procedure. The activity coefficients as determined by the two wavelength dye spectrophotometric method are compared to results of Donnan exclusion measurements, and of EMF measurements using a calcium ion selective electrode. The results of the spectrophotometric method are equal to those of the two other methods within the limits of error in the latter. The spectrophotometric measurements can extend to much lower ion activaties than the other two methods, and can be done in the presence of a large excess of added electrolyte, yielding results of considerably improved precision when compared to Donnan and EMF methods.     

The binding of divalent metal ions to polyelectrolytes in mixed counterion systems. II. Dextransulfate-Mg2+ and dextransulfate-Ca2+ in solutions containing added NaCl or KCl

Measurements of magnesium and calcium ion activities in solutions of the polyelectrolyte dextransulfate, with added sodium chloride or potassium chloride are presented. A two wavelength dye spectrophotometric method is used. Dextransulfate concentrations Cp (expressed as moles sulfate ion/litre) vary between 0.001 and 0.007, total ionic strengths between 0.005 and 0.08 mole/XXX. Divalent metal ion concentrations are varied between 0 and 1.2 Cp. The results for the metal ion activities are expressed in the form of parameters theta2 = C2/Cp (C(2bp) = bound divalent metal ion concentration) and K2 = theta2/(C2-C2b). For each divalent/univalent counterion pair the values obtained for theta2 and K2 as a function of C2,Cp, and ionic strength are compared to predictions of the "two variable theory" developed for these mixed counterion systems by Manning. This comparison shows that the observed decrease in theta2 with increasing ionic strength at fixed C2 and Cp is generally well predicted by the two variable theory. The extent of divalent ion binding at a given C2, Cp, and ionic strength is largest for the Ca/Na counterion combination, and lowest for the Mg/K combination.     

Fine structure and metabolism of multiply innervated fast muscle fibres in teleost fish

Summary Both the fast and slow muscle fibres of advanced teleost fish are multiply innervated. The fraction of slow-fibre volume occupied by mitochondria is 31.3%, 25.5% and 24.6%, respectively, for the myotomal muscles of brook trout (Salvelinus fontinalis), crucian carp (Carassius carassius), and plaice (Pleuronectes platessa), respectively. The corresponding figures for the fast muscles of these species are 9.3%, 4.6% and 2.0%, respectively. Cytochrome-oxidase and citrate-synthetase activities in the fast muscles of 9 species of teleost range from 0.20–0.93 moles substrate utilised, g wet weight muscle^-1 min^-1 (at 15° C) or around 4–17% of that of the corresponding slow fibres. Ultrastructural analyses reveal a marked heterogeneity within the fast-fibre population. For example, the fraction of fibres with <1% or >10% mitochondria is 0,4,42% and 36, 12 and 0%, respectively, for trout, carp and plaice. In general, small fibres (<500 m²) have the highest and large fibres (>1,500 m²) the lowest mitochondrial densities. The complexity of mitochondrial cristae is reduced in fast compared to slow fibres.Hexokinase activities range from 0.4–2.5 in slow and from 0.08–0.7 moles, g wet weight^-1 min^-1 in fast muscles, indicating a wide variation in their capacity for aerobic glucose utilisation. Phosphofructokinase activities are 1.2 to 3.6 times higher in fast than slow muscles indicating a greater glycolytic potential. Lactate dehydrogenase activities are not correlated with either the predicted anaerobic scopes for activity or the anoxic tolerances of the species studied. The results indicate a considerable variation in the aerobic capacities and principal fuels supporting activity among the fast muscles of different species. Brook trout and crucian carp are known to recruit fast fibres at low swimming speeds. For these species the aerobic potential of the fast muscle is probably sufficient to meet the energy requirements of slow swimming.     

Cultivation characteristics of immobilized Aspergillus oryzae for kojic acid production

Aspergillus oryzae in situ grown from spores entrapped in calcium alginate gel beads was used for the production of kojic acid. The immobilized cells in flask cultures produced kojic acid in a linear proportion while maintaining the stable metabolic activity for a prolonged production period. Kojic acid was accumulated up to a high concentration of 83 g/L, at which the kojic acid began to crystallize, and, thus, the culture had to be replaced with fresh media for the next batch culture. The overall productivities of two consecutive cultivations were higher than that of free mycelial fermentation. However, the production rate of kojic acid by the immobilized cells was suddenly decreased with the appearance of central cavernae inside the immobilized gel beads after 12 days of the third batch cultivation.     

Kinetic properties of a L-cysteine desulfhydrase-deficient mutant in the enzymatic formation of L-cysteine from D,L-ATC

Summary A mutant strain lacking in activity of L-cysteine desulfhydrase, a L-cysteine-decomposing enzyme, was screened after UV-treatment ofPseudomonas sp. CU6. The properties of the two strains, original and mutant, were compared on the basis of parameter values estimated from kinetic simulations of the enzymatic formation of L-cysteine from D,L-ATC. Both strains suffered from product inhibition, though inhibition was less for the mutant strain.     

Somatic embryogenesis from leaf callus of mature plants of the gymnospermCeratozamia mexicana var. robusta (Miq.) dyer (Cycadales)

Summary Embryogenic callus was induced from explanted pinnae of newly emerged leaves of mature plants ofCeratozamia mexicana var. Robusta (Gymnospermae, Cycadales) on a modified B5 formulation with 1 mg·liter⁻¹ kinetin and 1 mg·liter⁻¹ 2,4-dichlorophenoxyacetic acid. Proembryos developed on induction medium, but they were more numerous after subculture onto phytohormone-free medium, which also enabled suspensors to elongate. For nearly 1.5 yr after explanting, subsequent development of somatic embryos was not observed as suspensors dedifferentiated to form embryogenic callus on phytohormone-free medium. After this time, cotyledonary somatic embryos developed at the distal end of the suspensors. Somatic embryos have germinated on phytohormone-free medium. This is the first report of regeneration by somatic embryogenesis of a gymnosperm species from a mature tree. This technique has great potential for preservation of the highly endangered cycads.     

Work flow control in the flexible flow line

This research involves the development and evaluation of a part flow control model for a type of flexible manufacturing system (FMS) called a dedicated flexible flow line (FFL). In the FFL, all part types flow along the same path between successive machine groups. The specific objective of the part flow control model for the FFL is to minimize makespan for a given set of parts produced in a FFL near-term schedule, given fixed available buffer constraints. The control model developed in this research involved the repeated, real-time execution of a mathematical programming algorithm. The algorithm attempts to release the right mix of parts at the tight time to keep the FFL operating smoothly. The focus of the approach is directed toward managing WIP buffers for each machine group queue. The algorithm specifically incorporates stochastic disturbance factors such as machine failures. Through a limited number of simulation experiments, performance of the control model is shown to be superior to other parts releasing and control methods reported in the literature.