Critical Evaluation of Branch Polarity and Apical Dominance as Dictators of Colony Astogeny in a Branching Coral

The high morphological resemblance between branching corals and trees, can lead to comparative studies on pattern formation traits, best exemplified in plants and in some cnidarians. Here, 81 branches of similar size of the hermatypic coral Stylophora pistillata were lopped of three different genets, their skeletons marked with alizarin red-S, and divided haphazardly into three morphometric treatment groups: (I) upright position; (II) horizontal position, intact tip; and (III) horizontal position, cut tip. After 1 y of in-situ growth, the 45 surviving ramets were brought to the laboratory, their tissues removed and their architectures analyzed by 22 morphological parameters (MPs). We found that within 1 y, isolated branches developed into small coral colonies by growing new branches from all branch termini, in all directions. No architectural dissimilarity was assigned among the three studied genets of treatment I colonies. However, a major architectural disparity between treatment I colonies and colonies of treatments II and III was documented as the development of mirror structures from both sides of treatments II and III settings as compared to tip-borne architectures in treatment I colonies. We did not observe apical dominance since fragments grew equally from all branch sides without documented dominant polarity along branch axis. In treatment II colonies, no MP for new branches originating either from tips or from branch bases differed significantly. In treatment III colonies, growth from the cut tip areas was significantly lower compared to the base, again, suggesting lack of apical dominance in this species. Changes in branch polarity revealed genet associated plasticity, which in one of the studied genets, led to enhanced growth. Different genets exhibited canalization flexibility of growth patterns towards either lateral growth, or branch axis extension (skeletal weight and not porosity was measured). This study revealed that colony astogeny in S. pistillata is a regulated process expressed through programmed events and not directly related to simple energy trade-off principles or to environmental conditions, and that branch polarity and apical dominance do not dictate colony astogeny. Therefore, plasticity and astogenic disparities encompass a diversity of genetic (fixed and flexible) induced responses.     

CD40 ligand-activated human monocytes amplify glomerular inflammatory responses through soluble and cell-to-cell contact-dependent mechanisms.

Monocytes/macrophages play a critical role in the initiation and progression of a variety of glomerulonephritides. We sought to define the interactions between physiologically activated human monocytes and glomerular mesangial cells (MC) by employing a cell culture system that permits the accurate assessment of the contribution of soluble factors and cell-to-cell contact. Human peripheral blood monocytes, primed with IFN-gamma and GM-CSF, were activated with CD40 ligand (CD40L) or TNF-alpha and cocultured with MC. CD40L-activated monocytes induced higher levels of IL-6, monocyte chemoattractant protein-1 (MCP-1) and ICAM-1 synthesis by MC. Separation of CD40L-activated monocytes from MC by a porous membrane decreased the mesangial synthesis of IL-6 by 80% and ICAM-1 by 45%, but had no effect on MCP-1. Neutralizing Abs against the beta 2 integrins, LFA-1 and Mac-1, decreased IL-6 production by 40 and 50%, respectively. Ligation of mesangial surface ICAM-1 directly enhanced IL-6, but not MCP-1, production. Simultaneous neutralization of soluble TNF-alpha and IL-1 beta decreased MCP-1 production by 55% in membrane-separated cocultures of MC/CD40L-activated monocytes. Paraformaldehyde-fixed CD40L-activated monocytes (to preserve membrane integrity but prevent secretory activity), cocultured with MC at various ratios, induced IL-6, MCP-1, and ICAM-1 synthesis by MC. Plasma membrane preparations from activated monocytes also induced mesangial IL-6 and MCP-1 synthesis. The addition of plasma membrane enhanced TNF-alpha-induced mesangial IL-6 production by approximately 4-fold. Together, these data suggest that the CD40/CD40L is essential for optimal effector function of monocytes, that CD40L-activated monocytes stimulate MC through both soluble factors and cell-to-cell contact mediated pathways, and that both pathways are essential for maximum stimulation of MC.     

From the Schnauzenorgan to the back: Morphological comparison of mormyromast electroreceptor organs at different skin regions of Gnathonemus petersii

The nocturnally active weakly electric fish Gnathonemus petersii is known to employ active electrolocation for the detection of objects and for orientation in its environment. The fish emits pulse‐type electric signals with an electric organ and perceives these signals with more than 3,000 epidermal electroreceptor organs, the mormyromasts, which are distributed over the animal's skin surface. In this study, we measured the metric dimensions of the mormyromasts from different body regions to find structural and functional specialization of the various body parts. We focused on the two foveal regions of G. petersii, which are located at the elongated and movable chin (the Schnauzenorgan; SO) and at the nasal region (NR), the skin region between the mouth and the nares. These two foveal regions were compared to the dorsal part (back) of the fish, which contains typical nonfoveal mormyromasts. While the gross anatomy of the mormyromasts from all skin regions is similar, the metric dimensions of the main substructures differed. The mormyromasts at the SO are the smallest and contain the smallest receptor cells. In addition, the number of receptor cells per organ is lowest at the SO. In contrast, at the back the biggest receptor organs with the highest amount of receptor cells per organ occur. The mormyromasts at the NR are in several respects intermediate between those from the back and the SO. However, mormyromasts at the NR are longer than those at all other skin regions, the canal leading from the receptor pore to the inner chambers were the longest and the overlaying epidermal layers are the thickest. These results show that mormyromasts and the epidermis they are embedded in at both foveal regions differ specifically from those found on the rest of the body. The morphological specializations lead to functional specialization of the two foveae. J. Morphol., 2012. © 2012 Wiley Periodicals, Inc.     

Probing the U-Shaped Conformation of Caveolin-1 in a Bilayer

Caveolin induces membrane curvature and drives the formation of caveolae that participate in many crucial cell functions such as endocytosis. The central portion of caveolin-1 contains two helices (H1 and H2) connected by a three-residue break with both N- and C-termini exposed to the cytoplasm. Although a U-shaped configuration is assumed based on its inaccessibility by extracellular matrix probes, caveolin structure in a bilayer remains elusive. This work aims to characterize the structure and dynamics of caveolin-1 (D82–S136; Cav1_82–136) in a DMPC bilayer using NMR, fluorescence emission measurements, and molecular dynamics simulations. The secondary structure of Cav1_82–136 from NMR chemical shift indexing analysis serves as a guideline for generating initial structural models. Fifty independent molecular dynamics simulations (100 ns each) are performed to identify its favorable conformation and orientation in the bilayer. A representative configuration was chosen from these multiple simulations and simulated for 1 μs to further explore its stability and dynamics. The results of these simulations mirror those from the tryptophan fluorescence measurements (i.e., Cav1_82–136 insertion depth in the bilayer), corroborate that Cav1_82–136 inserts in the membrane with U-shaped conformations, and show that the angle between H1 and H2 ranges from 35 to 69°, and the tilt angle of Cav1_82–136 is 27 ± 6°. The simulations also reveal that specific faces of H1 and H2 prefer to interact with each other and with lipid molecules, and these interactions stabilize the U-shaped conformation.     

Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.