Cold shock and heat shock: a comparison of the protection generated by brief pretreatment at less severe temperatures

Abstract Brief exposure to low (0^oC) or high (40^oC) temperature elicits a protective response that prevents injury when the flesh fly, Sarcophaga crassipalpis Macquart, is subjected to more severe cold (-10^oC) or heat (45^oC). Both the low and high temperature responses were found in all developmental stages of the fly, but were most pronounced in the pupal and pharate adult stages. The protective responses generated by brief exposure to 0 or 40^oC appear similar in that both result in a rapid acquisition of cold or heat tolerance and a loss of protection after the flies are returned to 25^oC. The protection generated by chilling is obvious within 10 min of exposure to 0^oC while a 30 min exposure to 40^oC is required to induce the high temperature protection. High temperature protects against cold shock injury within a narrow range (around 36^oC) but we have no evidence that low temperature can protect against heat injury. We previously demonstrated that the rapid increase in cold tolerance correlates with concomitant increases in glycerol concentration, but in this study we found no significant elevation in glycerol in heat-shocked flies. Thus the physiological and biochemical bases for the rapid responses to cold and heat appear to be different.     

Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material

Background: The fracture between acrylic denture base material and artificial teeth is a common clinical occurrence in dental prosthodontic practice. Objective: To evaluate the bond strength between acrylic resins and resin denture teeth when submitted by two protocols of monomer liquid application on the tooth surface and using different polymerisation methods. Material and methods: Microwave‐polymerised (Onda‐Cryl), heat‐polymerised (Clássico) and autopolymerising (Jet) acrylic resins and a brand of resin denture teeth (Biotone) were used. The acrylic resins were polymerised according to the cycles: (A) microwave – fast cycle, Onda‐Cryl; (B) microwave – long cycle, Onda‐Cryl; (C) microwave – manufacturer’s cycle, Onda‐Cryl; (T) water bath – long cycle, Clássico and (Q) bench polymerisation cycle, Jet. Thirty specimens were prepared for each polymerisation method; 10 were packed with acrylic resin after 60 s of monomer liquid application on the tooth surface, 10 after 180 s and 10 without any monomer liquid application. For the purpose of the study, a shear test was used. anova and Tukey tests were performed to identify significant differences (α = 0.05). Results: The highest bond strength values were found for monomer surface treatments, regardless of the polymerisation cycles. The highest significant values were found for cycles B (15.4 ± 1.8 MPa), C (11.9 ± 4.9 MPa) and T (15.4 ± 2.6 MPa) for non‐treated and 60 s methylmethacrylate treated groups. Comparing the monomer liquid treatment, they did not differ significantly (p > 0.05), except for cycle A (p < 0.05). Conclusion: Chemical treatment using monomer on the tooth surface prior to the acrylic resin packing improved the bond strength between resin denture tooth and acrylic resin, regardless of monomer liquid treatment protocols. The microwavable resin, polymerised by fast cycle and autopolymerising resin should be avoided for processing denture and denture repairs, respectively.     

HLA-A*01 allele: a risk factor for dengue haemorrhagic fever in Brazil's population

Severe forms of dengue, such as dengue haemorrhagic fever (DHF) and dengue shock syndrome, are examples of a complex pathogenic mechanism in which the virus, environment and host immune response interact. The influence of the host's genetic predisposition to susceptibility or resistance to infectious diseases has been evidenced in several studies. The association of the human leukocyte antigen gene (HLA) class I alleles with DHF susceptibility or resistance has been reported in ethnically and geographically distinct populations. Due to these ethnic and viral strain differences, associations occur in each population, independently with a specific allele, which most likely explains the associations of several alleles with DHF. As the potential role of HLA alleles in the progression of DHF in Brazilian patients remains unknown, we then identified HLA-A alleles in 67 patients with dengue fever and 42 with DHF from Rio de Janeiro, Brazil, selected from 2002-2008 by the sequence-based typing technique. Statistical analysis revealed an association between the HLA-A*01 allele and DHF [odds ratio (OR) = 2.7, p = 0.01], while analysis of the HLA-A*31 allele (OR = 0.5, p = 0.11) suggested a potential protective role in DHF that should be further investigated. This study provides evidence that HLA class I alleles might be important risk factors for DHF in Brazilian patients.     

The art of vector engineering: towards the construction of next-generation genetic tools

When recombinant DNA technology was developed more than 40 years ago, no one could have imagined the impact it would have on both society and the scientific community. In the field of genetic engineering, the most important tool developed was the plasmid vector. This technology has been continuously expanding and undergoing adaptations. Here, we provide a detailed view following the evolution of vectors built throughout the years destined to study microorganisms and their peculiarities, including those whose genomes can only be revealed through metagenomics. We remark how synthetic biology became a turning point in designing these genetic tools to create meaningful innovations. We have placed special focus on the tools for engineering bacteria and fungi (both yeast and filamentous fungi) and those available to construct metagenomic libraries. Based on this overview, future goals would include the development of modular vectors bearing standardized parts and orthogonally designed circuits, a task not fully addressed thus far. Finally, we present some challenges that should be overcome to enable the next generation of vector design and ways to address it.     

Age-related quantitative changes in the organelles of rat neocerebellar Purkinje cells.

A quantitative study regarding the age-related changes occurring in the somatic organelles of the neocerebellar Purkinje cell is carried out, using female rats aged 2 to 24 months. Standard manual morphometric techniques are used to calculate the following parameters: somatic volume, volumetric fractions and absolute volumes of the intracellular structures as well as the membrane profile concentration, the membrane surface concentration and the mean surface of the rough endoplasmic reticulum cisternae per cell (RER-S). From a statistical point of view, all the cell components significantly modify their volumetric fractions (except the multivesicular bodies and nucleolus; the latter in relation to the nucleus) and their absolute volumes (except the mitochondria and the multivesicular bodies); the parameters regarding the reticulum are also modified during ageing. There is a linear trend between the age and either the somatic volume of the RER-S or the absolute volumes of the following structures: mitochondria, dense bodies, ground substance and total cytoplasm. A linear correlation is also observed between the cell volume and either the RER-S or the absolute volume of intracellular structures (the Golgi apparatus, the multivesicular bodies and nucleolus being excluded). Anatomophysiological considerations about the findings are discussed. The role of the ground substance as the major modulator of the volumetric plasticity of the Purkinje cell during ageing, is emphasized as a conclusion.     

Sustained Reduction of the Dengue Vector Population Resulting from an Integrated Control Strategy Applied in Two Brazilian Cities

Aedes aegypti has developed evolution-driven adaptations for surviving in the domestic human habitat. Several trap models have been designed considering these strategies and tested for monitoring this efficient vector of Dengue. Here, we report a real-scale evaluation of a system for monitoring and controlling mosquito populations based on egg sampling coupled with geographic information systems technology. The SMCP-Aedes, a system based on open technology and open data standards, was set up from March/2008 to October/2011 as a pilot trial in two sites of Pernambuco -Brazil: Ipojuca (10,000 residents) and Santa Cruz (83,000), in a joint effort of health authorities and staff, and a network of scientists providing scientific support. A widespread infestation by Aedes was found in both sites in 2008–2009, with 96.8%–100% trap positivity. Egg densities were markedly higher in SCC than in Ipojuca. A 90% decrease in egg density was recorded in SCC after two years of sustained control pressure imposed by suppression of >7,500,000 eggs and >3,200 adults, plus larval control by adding fishes to cisterns. In Ipojuca, 1.1 million mosquito eggs were suppressed and a 77% reduction in egg density was achieved. This study aimed at assessing the applicability of a system using GIS and spatial statistic analysis tools for quantitative assessment of mosquito populations. It also provided useful information on the requirements for reducing well-established mosquito populations. Results from two cities led us to conclude that the success in markedly reducing an Aedes population required the appropriate choice of control measures for sustained mass elimination guided by a user-friendly mosquito surveillance system. The system was able to support interventional decisions and to assess the program’s success. Additionally, it created a stimulating environment for health staff and residents, which had a positive impact on their commitment to the dengue control program.     

Cell-Associated and Extracellular Proteinases in Blastocrithidia culicis: Influence of Growth Conditions

The proteinase profile of Blastocrithidia culicis was analyzed, as well as how different growth conditions influenced its expression by gelatin-SDS-PAGE and the use of specific proteinase inhibitors. Multiple cell-associated proteinases with molecular masses corresponding to 33, 55, 60 kDa (cysteine proteinases) and 77, 80, 90, and 108 kDa (metalloproteinases) were detected using these methods. All the metalloproteinases identified were partitioned into the detergent phase after Triton X-114 extract, suggesting that they are membrane-bound, while all cysteine proteinases were partitioned into the aqueous phase. The proteolytic zymograms were similar when three different media were used for variable times of incubation. However, few quantitative and qualitative changes were observed. The secreted proteinase profile showed an heterogeneous pattern of enzymatic activities whose expression was dependent on time of growth and medium composition. However, the extracellular proteinase activities were abolished by 1,10-phenanthroline, suggesting that all of them are zinc-metalloproteinases. Received: 25 October 2000 / Accepted: 10 January 2001