Potential Sequential Exposures to 2-Butoxyethanol After Use of a Hard-Surface Cleaner

Professional workers and consumers frequently use hard-surface cleaning products and these products may contain glycol ethers (GEs), such as 2-Butoxyethanol (2-BE). Governmental agencies have set exposure limits for some chemicals used in cleaning products and these exposure limits have been used as guides to protect human health. The study objectives were to determine realistic inhalation exposures for professional workers performing multiple, sequential cleaning tasks and compare the exposures to the acute reference exposure level (REL), which California established for 2-BE. The ConsExpo model was acceptable for evaluating exposure based on a comparison of its predictions to experimentally measured 2-BE vapor concentrations from hard-surface cleaning. The typical worker exposure was predicted for a cleaning scenario consisting of three bathrooms and three kitchens (or three bedrooms) in a 1-h period. This exposure scenario would not be expected to result in significant health consequences because the predicted exposure was much lower than the REL. The predicted chronic and aggregate exposures were also acceptable. This analysis identified two important variables that affect inhalation exposure: cleaners should be used with adequate ventilation and wet wiping towels should be properly disposed so that they are not a source of continuing exposure.     

Loss of the Cytoskeletal Protein Pdlim7 Predisposes Mice to Heart Defects and Hemostatic Dysfunction

The actin-associated protein Pdlim7 is essential for heart and fin development in zebrafish; however, the expression and function of this PDZ-LIM family member in the mammal has remained unclear. Here, we show that Pdlim7 predominantly localizes to actin-rich structures in mice including the heart, vascular smooth muscle, and platelets. To test the requirement for Pdlim7 in mammalian development and function, we analyzed a mouse strain with global genetic inactivation of Pdlim7. We demonstrate that Pdlim7 loss-of-function leads to significant postnatal mortality. Inactivation of Pdlim7 does not disrupt cardiac development, but causes mild cardiac dysfunction in adult mice. Adult Pdlim7 ^-/- mice displayed increased mitral and tricuspid valve annulus to body weight ratios. These structural aberrations in Pdlim7 ^-/- mice were supported by three-dimensional reconstructions of adult cardiac valves, which revealed increased surface area to volume ratios for the mitral and tricuspid valve leaflets. Unexpectedly, we found that loss of Pdlim7 triggers systemic venous and arterial thrombosis, leading to significant mortality shortly after birth in Pdlim7 ^+/- (11/60) and Pdlim7 ^-/- (19/35) mice. In line with a prothrombotic phenotype, adult Pdlim7 ^-/- mice exhibit dramatically decreased tail bleed times compared to controls. These findings reveal a novel and unexpected function for Pdlim7 in maintaining proper hemostasis in neonatal and adult mice.     

The Effects of Catalyst Layer Deposition Methodology on Electrode Performance

The catalyst layer of the cathode is arguably the most critical component of low‐temperature fuel cells and carbon dioxide (CO₂) electrolysis cells because their performance is typically limited by slow oxygen (O₂) and CO₂ reduction kinetics. While significant efforts have focused on developing cathode catalysts with improved activity and stability, fewer efforts have focused on engineering the catalyst layer structure to maximize catalyst utilization and overall electrode and system performance. Here, we study the performance of cathodes for O₂ reduction and CO₂ reduction as a function of three common catalyst layer preparation methods: hand‐painting, air‐brushing, and screen‐printing. We employed ex‐situ X‐ray micro‐computed tomography (MicroCT) to visualize the catalyst layer structure and established data processing procedures to quantify catalyst uniformity. By coupling structural analysis with in‐situ electrochemical characterization, we directly correlate variation in catalyst layer morphology to electrode performance. MicroCT and SEM analyses indicate that, as expected, more uniform catalyst distribution and less particle agglomeration, lead to better performance. Most importantly, the analyses reported here allow for the observed differences over a large geometric volume as a function of preparation methods to be quantified and explained for the first time. Depositing catalyst layers via a fully‐automated air‐brushing method led to a 56% improvement in fuel cell performance and a significant reduction in electrode‐to‐electrode variability. Furthermore, air‐brushing catalyst layers for CO₂ reduction led to a 3‐fold increase in partial CO current density and enhanced product selectivity (94% CO) at similar cathode potential but a 10‐fold decrease in catalyst loading as compared to previous reports.     

Genetic Susceptible Locus in NOTCH2 Interacts with Arsenic in Drinking Water on Risk of Type 2 Diabetes

Background

Chronic exposure to arsenic in drinking water is associated with increased risk of type 2 diabetes mellitus (T2DM) but the underlying molecular mechanism remains unclear.

Objectives

This study evaluated the interaction between single nucleotide polymorphisms (SNPs) in genes associated with diabetes and arsenic exposure in drinking water on the risk of developing T2DM.

Methods

In 2009–2011, we conducted a follow up study of 957 Bangladeshi adults who participated in a case-control study of arsenic-induced skin lesions in 2001–2003. Logistic regression models were used to evaluate the association between 38 SNPs in 18 genes and risk of T2DM measured at follow up. T2DM was defined as having a blood hemoglobin A1C level greater than or equal to 6.5% at follow-up. Arsenic exposure was characterized by drinking water samples collected from participants'' tubewells. False discovery rates were applied in the analysis to control for multiple comparisons.

Results

Median arsenic levels in 2001–2003 were higher among diabetic participants compared with non-diabetic ones (71.6 µg/L vs. 12.5 µg/L, p-value <0.001). Three SNPs in ADAMTS9 were nominally associated with increased risk of T2DM (rs17070905, Odds Ratio (OR)  = 2.30, 95% confidence interval (CI) 1.17–4.50; rs17070967, OR = 2.02, 95%CI 1.00–4.06; rs6766801, OR = 2.33, 95%CI 1.18–4.60), but these associations did not reach the statistical significance after adjusting for multiple comparisons. A significant interaction between arsenic and NOTCH2 (rs699780) was observed which significantly increased the risk of T2DM (p for interaction = 0.003; q-value = 0.021). Further restricted analysis among participants exposed to water arsenic of less than 148 µg/L showed consistent results for interaction between the NOTCH2 variant and arsenic exposure on T2DM (p for interaction  = 0.048; q-value = 0.004).

Conclusions

These findings suggest that genetic variation in NOTCH2 increased susceptibility to T2DM among people exposed to inorganic arsenic. Additionally, genetic variants in ADAMTS9 may increase the risk of T2DM.     

Genetic Analysis of a Rat Model of Aerobic Capacity and Metabolic Fitness

Aerobic capacity is a strong predictor of all-cause mortality and can influence many complex traits. To explore the biological basis underlying this connection, we developed via artificial selection two rat lines that diverge for intrinsic (i.e. inborn) aerobic capacity and differ in risk for complex disease traits. Here we conduct the first in-depth pedigree and molecular genetic analysis of these lines, the high capacity runners (HCR) and low capacity runners (LCR). Our results show that both HCR and LCR lines maintain considerable narrow-sense heritability (h²) for the running capacity phenotype over 28 generations (h² = 0.47 ± 0.02 and 0.43 ± 0.02, respectively). To minimize inbreeding, the lines were maintained by rotational mating. Pedigree records predict that the inbreeding coefficient increases at a rate of <1% per generation, ~37-38% slower than expected for random mating. Genome-wide 10K SNP genotype data for generations 5, 14, and 26 demonstrate substantial genomic evolution: between-line differentiation increased progressively, while within-line diversity deceased. Genome-wide average heterozygosity decreased at a rate of <1% per generation, consistent with pedigree-based predictions and confirming the effectiveness of rotational breeding. Linkage disequilibrium index r² decreases to 0.3 at ~3 Mb, suggesting that the resolution for mapping quantitative trait loci (QTL) can be as high as 2-3 cM. To establish a test population for QTL mapping, we conducted an HCR-LCR intercross. Running capacity of the F1 population (n=176) was intermediate of the HCR and LCR parentals (28 pairs); and the F2 population (n=645) showed a wider range of phenotypic distribution. Importantly, heritability in the F0-F2 pedigree remained high (h²~0.6). These results suggest that the HCR-LCR lines can serve as a valuable system for studying genomic evolution, and a powerful resource for mapping QTL for a host of characters relevant to human health.     

Modulation of bone marrow mesenchymal stem cell secretome by ECM-like hydrogels

It has been demonstrated that bone marrow mesenchymal stem cell (BM-MSCs) transplantation has beneficial effects on several central nervous system (CNS) debilitating conditions. Growing evidence indicate that trophic factors secreted by these cells are the key mechanism by which they are acting. These cells are frequently used in combination with 3D artificial matrices, for instance hydrogels, in tissue engineering-based approaches. However, so far, no study has been reported on the influence of such matrices, namely the presence or absence of extracellular matrix motifs, on BM-MSCs secretome and its effects in neuronal cell populations. In this sense, we herein studied the impact of a hydrogel, gellan gum, on the behavior and secretome of BM-MSCs, both in its commercial available form (commonly used in tissue engineering) and in a fibronectin peptide-modified form. The results showed that in the presence of a peptide in the gellan gum hydrogel, BM-MSCs presented higher proliferation and metabolic activity than in the regular hydrogel. Moreover, the typical spindle shape morphology of BM-MSCs was only observed in the modified hydrogel. The effects of the secretome of BM-MSCs were also affected by the chemical nature of the extracellular matrix. BM-MSCs cultured in the modified hydrogel were able to secrete factors that induced higher metabolic viabilities and neuronal cell densities, when compared to those of the unmodified hydrogel. Thus adding a peptide sequence to the gellan gum had a significant effect on the morphology, activity, proliferation and secretome of BM-MSCs. These results highlight the importance of mimicking the extracellular matrix when BM-MSCs are cultured in hydrogels for CNS applications.     

66 Architectural role of HMO1 in bending,bridging, and compacting DNA

HMO1 proteins are abundant Saccharomyces cerevisiae (yeast) High Mobility Group Box (HMGB) protein (Kamau, Bauerla & Grove, 2004). HMGB proteins are nuclear proteins which are known to be architectural proteins (Travers, 2003). HMO1 possesses two HMGB box domains. It has been reported that double box HMGB proteins induce strong bends upon binding to DNA. It is also believed that they play an essential role in reorganizing chromatin and, therefore, are likely to be involved in gene activation. To characterize DNA binding we combine single molecule stretching experiments and AFM imaging of HMO1 proteins bound to DNA. By stretching DNA bound to HMO1, we determine the dissociation constant, measure protein induced average DNA bending angles, and determine the rate at which torsional constraint of the DNA is released by the protein. To further investigate the local nature of the binding, AFM images of HMO1-DNA complexes are imaged, and we probe the behavior of these complexes as a function of protein concentration. The results show that at lower concentrations, HMO1 preferentially binds to the ends of the double helix and links to the separate DNA strands. At higher concentrations HMO1 induces formation of a complex network that reorganizes DNA. Although HMG nuclear proteins are under intense investigation, little is known about HMO1. Our studies suggest that HMO1 proteins may facilitate interactions between multiple DNA molecules.     

Fine genetic mapping of RXopJ4, a bacterial spot disease resistance locus from Solanum pennellii LA716

The RXopJ4 resistance locus from the wild accession Solanum pennellii (Sp) LA716 confers resistance to bacterial spot disease of tomato (S. lycopersicum, Sl) caused by Xanthomonas perforans (Xp). RXopJ4 resistance depends on recognition of the pathogen type III effector protein XopJ4. We used a collection of Sp introgression lines (ILs) to narrow the RXopJ4 locus to a 4.2-Mb segment on the long arm of chromosome 6, encompassed by the ILs 6-2 and 6-2-2. We then adapted or developed a collection of 14 molecular markers to map on a segregating F₂ population from a cross between the susceptible parent Sl FL8000 and the resistant parent RXopJ4 8000 OC₇. In the F₂ population, a 190-kb segment between the markers J350 and J352 cosegregated with resistance. This fine mapping will enable both the identification of candidate genes and the detection of resistant plants using cosegregating markers. The RXopJ4 resistance gene(s), in combination with other recently characterized genes and a quantitative trait locus (QTL) for bacterial spot disease resistance, will likely be an effective tool for the development of durable resistance in cultivated tomato.     

AN EVALUATION OF THE HYBRID SPECIATION HYPOTHESIS FOR XIPHOPHORUS CLEMENCIAE BASED ON WHOLE GENOME SEQUENCES

Once thought rare in animal taxa, hybridization has been increasingly recognized as an important and common force in animal evolution. In the past decade, a number of studies have suggested that hybridization has driven speciation in some animal groups. We investigate the signature of hybridization in the genome of a putative hybrid species, Xiphophorus clemenciae, through whole genome sequencing of this species and its hypothesized progenitors. Based on analysis of this data, we find that X. clemenciae is unlikely to have been derived from admixture between its proposed parental species. However, we find significant evidence for recent gene flow between Xiphophorus species. Although we detect genetic exchange in two pairs of species analyzed, the proportion of genomic regions that can be attributed to hybrid origin is small, suggesting that strong behavioral premating isolation prevents frequent hybridization in Xiphophorus. The direction of gene flow between species is potentially consistent with a role for sexual selection in mediating hybridization.