The differential tissue distribution of the citrus flavanone naringenin following gastric instillation

Citrus flavonoids have been investigated for their biological activity, with both anti-inflammatory and -carcinogenic effects being reported. However, little information is known on the bioavailability of these compounds in vivo. The objectives of this study were to determine the tissue distribution of naringenin after gastric gavage of [³H]-naringenin to rats. Unlabelled naringenin was also used to quantify the levels of naringenin and its major metabolites in tissues and eliminated in the urine and faeces. Significant radioactivity was detected in the plasma as well as all tissues examined 2 h post-gavage. After 18 h, higher levels of radioactivity were retained in plasma and tissues (55% of the administered radioactivity). Investigation of the nature of metabolites, using unlabelled naringenin, revealed that the glucuronides were the major components in plasma, tissues and urine, in addition to the colonic metabolite 3-(4-hydroxyphenyl) propionic acid, detected in the urine. The aglycone was the form extensively retained in tissues after 18 h post-gavage. Total identified metabolites detected after 18 h in most tissues were only 1-5% of the levels detected after 2 h. However, the brain, lungs and heart retained 27, 20 and 11%, respectively, relative to the total metabolites detected at 2 h. While radioactive detection suggests increased levels of breakdown products of naringenin after 18 h versus 2 h, the products identified using unlabelled naringenin are not consistent with this, suggesting that a predominant proportion of the naringenin breakdown products at 18 h are retained as smaller decomposition molecules which cannot yet be identified.     

Molecular marker diversity of SCN-resistant sources in soybean.

Soybean cyst nematode (SCN) (Heterodera glycines Ichinohe; HG) is one of the most destructive pests of soybean (Glycine max (L.) Merr.) in the United States. Over 100 SCN-resistant accessions within the USDA Soybean Germplasm Collection have been identified, but little is known about the genetic diversity of this SCN-resistant germplasm. The objective of this research was to evaluate the genetic variation and determine the genetic relationships among SCN-resistant accessions. One hundred twenty-two genotypes were evaluated by 85 simple sequence repeat (SSR) markers from 20 linkage groups. Non-hierarchical (VARCLUS) and hierarchical (Ward's) clustering were combined with multidimensional scaling (MDS) to determine relationships among tested lines. The 85 SSR markers produced 566 allelic fragments with a mean polymorphic information content (PIC) value of 0.35. The 122 lines were grouped into 7 clusters by 2 different clustering methods and the MDS results consistently corresponded to the assigned clusters. Assigned clusters were dominated by genotypes that possess one or more unique SCN resistance genes and were associated with geographical origins. The results of analysis of molecular variance (AMOVA) showed that the variation differences among clusters and individual lines were significant, but the differences among individuals within clusters were not significant.     

Chemical modification of glucose oxidase: possible formation of molten globule-like intermediate structure

Chemical modification of lysine residues in glucose oxidase was carried out using citraconic anhydride. Modification brought about changes in the kinetic properties of the enzyme as evident by substantial lowering of V(max) and K(m). Enhancement of tryptophan fluorescence was observed with a dramatic change in its pH dependence due to modification. Near- and far-UV circular dichroism spectra of the native and modified forms suggested formation of molten globule-like structures, further supported by 8-anilino-1-naphthalenesulfonic acid fluorescence which indicated higher exposure of hydrophobic residues as a result of chemical modification.     

Fetal growth and subsequent risk of breast cancer: results from long term follow up of Swedish cohort

ObjectiveTo investigate whether size at birth and rate of fetal growth influence the risk of breast cancer in adulthood.DesignCohort identified from detailed birth records, with 97% follow up.SettingUppsala Academic Hospital, Sweden.Participants5358 singleton females born during 1915-29, alive and traced to the 1960 census.ResultsSize at birth was positively associated with rates of breast cancer in premenopausal women. In women who weighed ⩾4000 g at birth rates of breast cancer were 3.5 times (95% confidence interval 1.3 to 9.3) those in women of similar gestational age who weighed <3000 g at birth. Rates in women in the top fifths of the distributions of birth length and head circumference were 3.4 (1.5 to 7.9) and 4.0 (1.6 to 10.0) times those in the lowest fifths (adjusted for gestational age). The effect of birth weight disappeared after adjustment for birth length or head circumference, whereas the effects of birth length and head circumference remained significant after adjustment for birth weight. For a given size at birth, gestational age was inversely associated with risk (P=0.03 for linear trend). Adjustment for markers of adult risk factors did not affect these findings. Birth size was not associated with rates of breast cancer in postmenopausal women.ConclusionsSize at birth, particularly length and head circumference, is associated with risk of breast cancer in women aged <50 years. Fetal growth rate, as measured by birth size adjusted for gestational age, rather than size at birth may be the aetiologically relevant factor in premenopausal breast cancer.

What is already known on this topic

There is some evidence that birth weight is related to risk of breast cancerThe exact nature of any association and whether it differs at premenopausal and postmenopausal ages is unclearFew studies have examined the effect of other measures of birth size and of gestational age

What this study adds

There are strong positive associations between measures of birth size and rates of breast cancer at premenopausal ages that persisted after adjustment for adult risk factorsFor a given birth size, gestational age was inversely associated with risk, suggesting that the rate of fetal growth may be aetiologically relevant to premenopausal breast cancerThere was no association between birth characteristics and rates of breast cancer at postmenopausal ages     

Cadmium-induced oxidative stress and DNA damage in kidney of pregnant female rats

In the present study, we have investigated the influence of sub-acute treatment with cadmium (Cd) on some parameters indicative of oxidative stress and DNA damage in tissues of pregnant female rats. Pregnant female rats (n=6) were injected subcutaneously, daily with a dose of cadmium chloride of 3 mg/kg body weight (b.w.) from day 6 to day 19 of pregnancy, and they were allowed to deliver normally. MDA level and GPx, CAT and SOD activities were used as markers of oxidative stress in liver and kidney. The 8-oxo-dG level was measured by the HPLC-EC system. Cd treatment increased MDA (+116%, p<0.01) in kidney. Moreover, Cd treatment also decreased CuZn-SOD (-11%, p<0.05) and GSH level (-52%, p<0.05) in kidney. Treated rats displayed an increase of the liver metallothionein (MT) level. Induction of MT in liver was probably implicated in the detoxification of Cd. The high level of Cd (3 mg/kg) used in the present study is partially neutralized by MT in liver, whereas the free fraction could be implicated in the oxidative stress and DNA oxidation observed in kidney. Cd treatment failed to alter 8-oxodGuo, indicating the absence of DNA oxidation in liver; by contrast, the same treatment increased the 8-oxodGuo level (+51%, p<0.05) in the kidney of pregnant female rats, indicating an oxidative stress associated with DNA damage only in kidney.     

Social life cycle assessment for material selection: a case study of building materials

Purpose

Sustainability of a material-based product mainly depends on the materials used for the product itself or during its lifetime. A material selection decision should not only capture the functional performance required but should also consider the economical, social, and environmental impacts originated during the product life cycle. There is a need to assess social impacts of materials along the full life cycle, not only to be able to address the “social dimension” in sustainable material selection but also for potentially improving the circumstances of affected stakeholders. This paper presents the method and a case study of social life cycle assessment (S-LCA) specialized for comparative studies. Although the authors’ focus is on material selection, the proposed methodology can be used for comparative assessment of products in general.

Methods

The method is based on UNEP/SETAC “guidelines for social life-cycle assessment of products” and includes four main phases: goal and scope definition, life cycle inventory analysis, life cycle impact assessment, and life cycle interpretation. However, some special features are presented to adjust the framework for materials comparison purpose. In life cycle inventory analysis phase, a hot spot assessment is carried out using material flow analysis and stakeholder and experts’ interviews. Based on the results of that, a pairwise comparison method is proposed for life cycle impact assessment applying analytic hierarchy process. A case study was conducted to perform a comparative assessment of the social and socio-economic impacts in life cycle of concrete and steel as building materials in Iran. For hot spot analysis, generic and national level data were gathered, and for impact assessment phase, site-specific data were used.

Result and discussion

The unique feature of the proposed method compared with other works in S-LCA is its specialty to materials and products comparison. This leads to some differences in methodological issues of S-LCA that are explained in the paper in detail. The case study results assert that “steel/iron” in the north of Iran generally has the better social performance than “concrete/cement.” However, steel is associated with many negative social effects in some subcategories, e.g., freedom of association, fair salary, and occupational health in extraction phase. Against, social profile of concrete and cement industry is damaged mainly due to the negative impact of cement production on safe and healthy living condition. The case study presented in this article shows that the evaluation of social impacts is possible, even if the assessment is always affected by subjective value systems.

Conclusions

Application of the UNEP/SETAC guidelines in comparative studies can be encouraged based on the results of this paper. It enables a hotspot assessment of the social and socio-economic impacts in life cycle of alternative materials. This research showed that the development of a specialized S-LCA approach for materials and products comparison is well underway although many challenges still persist. Particularly characterization method in life cycle impact assessment phase is challenging. The findings of this case study pointed out that social impacts are primarily connected to the conduct of companies and less with processes and materials in general. These findings confirm the results of Dreyer et al. (Int J Life Cycle Assess 11(2):88–97, 2006). The proposed approach aims not only to identify the best socially sustainable alternative but also to reveal product/process improvement potentials to facilitate companies to act socially compatible. It will be interesting to apply the UNEP/SETAC approach of S-LCA to other materials and products; materials with a more complex life cycle will be a special challenge. As with any new method, getting experience on data collection and evaluation, building a data base, integrating the method in software tools, and finding ways for effective communication of results are important steps until integrating S-LCA in routine decision support.     

Chemical characteristics and antioxidant activity of exopolysaccharide fractions from Microbacterium terregens

The Gram-positive bacterial strain isolated from soil was identified as the non-pathogenic Microbacterium terregens. The exopolysaccharide (CPS) produced from M. terregens was obtained by isopropanol precipitation (13.72 g L^?1 growth medium), The resulted exopolysaccharide was purified by chromatography on DEAE-cellulose and Sephacryl S-200 columns, when two polysaccharide fractions termed CPSI and CPSII were obtained. Structure features of CPSI and CPSII were investigated by a combination of chemical and chromatographic analyses, such as acid hydrolysis, methylation analysis, periodate oxidation–Smith degradation, HPLC, GC–MS, and IR. The results indicated that CPSI and CPSII were composed of glucose: mannose in a ratio of 2.7:1 and 3.2:1 with molecular weights 80 and 150 kDa, respectively. It has a backbone of (1 → 4)-linked β-glucose residues, which occasionally branches at O-6. The branches were composed of (1 → 4)-linked β-mannose residues. The antioxidant activity of the CPS, CPSI and CPSII was evaluated in-vitro by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging assay (RSA). CPSI fraction showed the highest antioxidant activity among the three fractions, with an IC₅₀ value of 230 μg mL^?1. The effect of molecular weight of the polysaccharide on the improvement of the antioxidant potential seems to be significant.     

Proteomic analysis of the Mexican lime tree response to "Candidatus Phytoplasma aurantifolia" infection

"Candidatus Phytoplasma aurantifolia" is the causative agent of witches' broom disease in the Mexican lime tree (Citrus aurantifolia L.), and is responsible for major tree losses in Southern Iran and Oman. The pathogen is strictly biotrophic, and, therefore, completely dependent on living host cells for its survival. The molecular basis of compatibility and disease development in this system is poorly understood. We applied a proteomics approach to analyse gene expression in Mexican limes infected with "Ca. Phytoplasma aurantifolia". Leaf samples were collected from healthy and infected plants and were analysed using 2-DE coupled with MS. Among 800 leaf proteins that were detected reproducibly in eight biological replicates of healthy and eight biological replicates of infected plants, 55 showed a significant response to the disease. MS resulted in identification of 39 regulated proteins, which included proteins that were involved in oxidative stress defence, photosynthesis, metabolism, and the stress response. Our results provide the first proteomic view of the molecular basis of the infection process and identify genes that could help inhibit the effects of the pathogen.     

HspX protein as a candidate vaccine against <Emphasis Type="Italic">Mycobacterium tuberculosis</Emphasis>: an overview

Background

Tuberculosis (TB) is a contagious infectious disease caused by Mycobacterium tuberculosis (Mtb). This disease with two million deaths per year has the highest mortality rate among bacterial infections. The only available vaccine against TB is BCG vaccine. BCG is an effective vaccine against TB in childhood, however, due to some limitations, has not proper efficiency in adults. Also, BCG cannot produce an adequately protective response against reactivation of latent infections.

Objective

In the present study we will review the most recent findings about contribution of HspX protein in the vaccines against tuberculosis.

Methods

Therefore, many attempts have been made to improve BCG or to find its replacement. Most of the subunit vaccines for TB in various phases of clinical trials were constructed as prophylactic vaccines using Mtb proteins expressed in the replicating stage. These vaccines might prevent active TB but not reactivation of latent tuberculosis infection (LTBI). A literature search was performed on various online databases (PubMed, Scopus, and Google Scholar) regarding the roles of HspX protein in tuberculosis vaccines.

Results

Ideal subunit post-exposure vaccines should target all forms of TB infection, including active symptomatic and dormant (latent) asymptomatic forms. Among these subunit vaccines, HspX is the most important latent phase antigen of M. tuberculosis with a strong immunological response. There are many studies that have evaluated the immunogenicity of this protein to improve TB vaccine.

Conclusion

According to the studies, HspX protein is a good candidate for development of subunit vaccines against TB infection.

     

PVA based nanofiber containing cellulose modified with graphitic carbon nitride/nettles/trachyspermum accelerates wound healing

Today, bacterial cellulose has received a great deal of attention for its medical applications due to its unique structural properties such as high porosity, good fluid uptake, good strength, and biocompatibility. This study aimed to fabricate and study bacterial cellulose/graphitic carbon nitride/nettles/trachyspermum nanocomposite by immersion and PVA/BC/g-C₃N₄/nettles/trachyspermum nanofiber by electrospinning method as a wound dressing. The g-C₃N₄ and g-C₃N₄ solution were synthesized and then were characterized using Fourier transform infrared, X-ray diffraction, Zeta Potential, and scanning electronic microscope analyzes. Also, the antibacterial properties of the synthesized materials were proved by gram-positive and gram-negative bacteria using the minimum inhibitory concentration method. Besides, the toxicity, migration, and cell proliferation results of the synthesized materials on NIH 3T3 fibroblasts were evaluated using MTT and scratch assays and showed that the BC/PVA/g-C₃N₄/nettles/trachyspermum composite not only had no toxic effect on cells but also contributed to cell survival, cell migration, and proliferation has done. To evaluate the mechanical properties, a tensile strength test was performed on PVA/BC/g-C₃N₄/nettles/trachyspermum nanofibers, and the results showed good strength of the nanocomposite. In addition, in vivo assay, the produced nanofibers were used to evaluate wound healing, and the results showed that these nanofibers were able to accelerate the wound healing process so that after 14 days, the wound healing percentage showed 95%. Therefore, this study shows that PVA/BC/g-C₃N₄/nettles/trachyspermum nanofibers effectively inhibit bacterial growth and accelerate wound healing.