Dissolution of sulphur particles by Thiobacillus ferrooxidans: substrate for unattached cells

The growth of Thiobacillus ferrooxidans on sulphur is known to proceed through the attachment of cells to the sulphur particles. Experiments, However, show that the cells in the liquid phase, which are not attached to the sulphur particles, also grow. It has been shown through the use of a two-compartment membrane reactor that this increase is partially due to the release of ions, corresponding to partially oxidized of sulphur, into the solution by the attached cells. The main soluble ion has been found to the thiosulphate, but traces of sulphite have also been detected. (c) 1993 John Wiley & Sons, Inc.     

Mechanism of formation of amyloid protofibrils of barstar from soluble oligomers: evidence for multiple steps and lateral association coupled to conformational conversion

Understanding the heterogeneity of the soluble oligomers and protofibrillar structures that form initially during the process of amyloid fibril formation is a critical aspect of elucidating the mechanism of amyloid fibril formation by proteins. The small protein barstar offers itself as a good model protein for understanding this aspect of amyloid fibril formation, because it forms a stable soluble oligomer, the A form, at low pH, which can transform into protofibrils. The mechanism of formation of protofibrils from soluble oligomer has been studied by multiple structural probes, including binding to the fluorescent dye thioflavin T, circular dichroism and dynamic light scattering, and at different temperatures and different protein concentrations. The kinetics of the increase in any probe signal are single exponential, and the rate measured depends on the structural probe used to monitor the reaction. Fastest is the rate of increase in the mean hydrodynamic radius, which grows from a value of 6 nm for the A form to 20 nm for the protofibril. Slower is the rate of increase in thioflavin T binding capacity, and slowest is the rate of increase in circular dichroism at 216 nm, which occurs at about the same rate as that of the increase in light scattering intensity. The dynamic light scattering measurements suggest that the A form transforms completely into larger size aggregates at an early stage during the aggregation process. It appears that structural changes within the aggregates occur at the late stages of assembly into protofibrils. For all probes, and at all temperatures, no initial lag phase in protofibril growth is observed for protein concentrations in the range of 1 microM to 50 microM. The absence of a lag phase in the increase of any probe signal suggests that aggregation of the A form to protofibrils is not nucleation dependent. In addition, the absence of a lag phase in the increase of light scattering intensity, which changes the slowest, suggests that protofibril formation occurs through more than one pathway. The rate of aggregation increases with increasing protein concentration, but saturates at high concentrations. An analysis of the dependence of the apparent rates of protofibril formation, determined by the four structural probes, indicates that the slowest step during protofibil formation is lateral association of linear aggregates. Conformational conversion occurs concurrently with lateral association, and does so in two steps leading to the creation of thioflavin T binding sites and then to an increase in beta-sheet structure. Overall, the study indicates that growth during protofibril formation occurs step-wise through progressively larger and larger aggregates, via multiple pathways, and finally through lateral association of critical aggregates.     

Dendrimer versus linear conjugate: Influence of polymeric architecture on the delivery and anticancer effect of paclitaxel

The relative difference in polymeric architectures of dendrimer and linear bis(poly(ethylene glycol)) (PEG) polymer in conjugation with paclitaxel has been described. Paclitaxel, a poorly soluble anticancer drug, was covalently conjugated with PAMAM G4 hydroxyl-terminated dendrimer and bis(PEG) polymer for the potential enhancement of drug solubility and cytotoxicity. Both conjugates were characterized by 1NMR, HPLC, and MALDI/TOF. In addition, molecular conformations of dendrimer, bis(PEG), paclitaxel, and its polymeric conjugates were studied by molecular modeling. Hydrolysis of the ester bond in the conjugate was analyzed by HPLC using esterase hydrolyzing enzyme. In vitro cytotoxicity of dendrimer, bis(PEG), paclitaxel, and polymeric conjugates containing paclitaxel was evaluated using A2780 human ovarian carcinoma cells. Cytotoxicity increased by 10-fold with PAMAM dendrimer-succinic acid-paclitaxel conjugate when compared with free nonconjugated drug. Data obtained indicate that the nanosized dendritic polymer conjugates can be used with good success as anticancer drug carriers.     

Building a Comprehensive Mill-Level Database for the Industrial Sectors Integrated Solutions (ISIS) Model of the U.S. Pulp and Paper Sector

Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector.     

Olfactory Dysfunction Predicts 5-Year Mortality in Older Adults

Prediction of mortality has focused on disease and frailty, although antecedent biomarkers may herald broad physiological decline. Olfaction, an ancestral chemical system, is a strong candidate biomarker because it is linked to diverse physiological processes. We sought to determine if olfactory dysfunction is a harbinger of 5-year mortality in the National Social Life, Health and Aging Project [NSHAP], a nationally representative sample of older U.S. adults. 3,005 community-dwelling adults aged 57–85 were studied in 2005–6 (Wave 1) and their mortality determined in 2010–11 (Wave 2). Olfactory dysfunction, determined objectively at Wave 1, was used to estimate the odds of 5-year, all cause mortality via logistic regression, controlling for demographics and health factors. Mortality for anosmic older adults was four times that of normosmic individuals while hyposmic individuals had intermediate mortality (p<0.001), a “dose-dependent” effect present across the age range. In a comprehensive model that included potential confounding factors, anosmic older adults had over three times the odds of death compared to normosmic individuals (OR, 3.37 [95%CI 2.04, 5.57]), higher than and independent of known leading causes of death, and did not result from the following mechanisms: nutrition, cognitive function, mental health, smoking and alcohol abuse or frailty. Olfactory function is thus one of the strongest predictors of 5-year mortality and may serve as a bellwether for slowed cellular regeneration or as a marker of cumulative toxic environmental exposures. This finding provides clues for pinpointing an underlying mechanism related to a fundamental component of the aging process.     

Exploration of the correlation between solvation dynamics and internal dynamics of a protein

Protein function is intimately related to the dynamics of the protein as well as to the dynamics of the solvent shell around the protein. Although it has been argued extensively that protein dynamics is slaved to solvent dynamics, experimental support for this hypothesis is scanty. In this study, measurements of fluorescence anisotropy decay kinetics have been used to determine the motional dynamics of the fluorophore acrylodan linked to several locations in a small protein barstar in its various structural forms, including the native and unfolded states as well as the acid and protofibril forms. Fluorescence upconversion and streak camera measurements have been used to determine the solvation dynamics around the fluorophore. Both the motional dynamics and solvent dynamics were found to be dependent upon the location of the probe as well as on the structural form of the protein. While the (internal) motional dynamics of the fluorophore occur in the 0.1-3 ns time domain, the observed mean solvent relaxation times are in the range of 20-300 ps. A strong positive correlation between these two dynamical modes was found in spite of the significant difference in their time scales. This observed correlation is a strong indicator of the coupling between solvent dynamics and the dynamics in the protein.     

Protein dynamics control proton transfer from bulk solvent to protein interior: a case study with a green fluorescent protein

The kinetics of proton transfer in Green Fluorescent Protein (GFP) have been studied as a model system for characterizing the correlation between dynamics and function of proteins in general. The kinetics in EGFP (a variant of GFP) were monitored by using a laser-induced pH jump method. The pH was jumped from 8 to 5 by nanosecond flash photolysis of the "caged proton," o-nitrobenzaldehyde, and subsequent proton transfer was monitored by following the decrease in fluorescence intensity. The modulation of proton transfer kinetics by external perturbants such as viscosity, pH, and subdenaturing concentrations of GdnHCl as well as of salts was studied. The rate of proton transfer was inversely proportional to solvent viscosity, suggesting that the rate-limiting step is the transfer of protons through the protein matrix. The rate is accelerated at lower pH values, and measurements of the fluorescence properties of tryptophan 57 suggest that the enhancement in rate is associated with an enhancement in protein dynamics. The rate of proton transfer is nearly independent of temperature, unlike the rate of the reverse process. When the stability of the protein was either decreased or increased by the addition of co-solutes, including the salts KCl, KNO(3), and K(2)SO(4), a significant decrease in the rate of proton transfer was observed in all cases. The lack of correlation between the rate of proton transfer and the stability of the protein suggests that the structure is tuned to ensure maximum efficiency of the dynamics that control the proton transfer function of the protein.     

An efficient route to thioglycosides with the 2,3-anhydro-D-ribo stereochemistry

An improved route for the synthesis of p-tolyl 2,3-anhydro-5-O-benzoyl-1-thio-beta-D-ribofuranoside and its alpha anomer, which are important intermediates in the synthesis of alpha- and beta-D-arabinofuranosides, has been developed. The products are obtained in six steps from D-xylose in 39% overall yield.     

Solvent-induced tuning of internal structure in a protein amyloid protofibril

An important goal in studies of protein aggregation is to obtain an understanding of the structural diversity that is characteristic of amyloid fibril and protofibril structures at the molecular level. In this study, what to our knowledge are novel assays based on time-resolved fluorescence anisotropy decay and dynamic quenching measurements of a fluorophore placed at different specific locations in the primary structure of a small protein, barstar, have been used to determine the extent to which the protein sequence participates in the structural core of protofibrils. The fluorescence measurements reveal the structural basis of how modulating solvent polarity results in the tuning of the protofibril conformation from a pair of parallel β-sheets in heat-induced protofibrils to a single parallel β-sheet in trifluorethanol-induced protofibrils. In trifluorethanol-induced protofibrils, the single β-sheet is shown to be built up from in-register β-strands formed by nearly the entire protein sequence, while in heat-induced protofibrils, the pair of β-sheets motif is built up from β-strands formed by only the last two-third of the protein sequence.     

DNA polymerase I of Mycobacterium tuberculosis: functional role of a conserved aspartate in the hinge joining the M and N helices.

The highly conserved GXD sequence present in the Mycobacterium tuberculosis DNA polymerase I corresponds to a hinge region in the finger subdomain connecting M and N helices of Escherichia coli pol I. An examination of the crystal structures of pol I family polymerases reveals that the invariant aspartate of the hinge forms a salt bridge with the conserved arginine of the O-helix and an H-bond with Gln-708. To clarify the role of this region, we generated and characterized conserved and nonconserved mutant derivatives of this aspartate, the preceding glutamate and the Gln in TB pol I. For comparison, D732A mutein of pol I was also included. The muteins representing conserved aspartate (Asp-707 of TB pol I or Asp-732 of pol I) showed a strong K(m)((dNTP)) effect and minor alteration in K(d)((DNA)), with about 10-20-fold decrease in overall catalytic efficiency. The TB muteins, E706A and Q683A, have less pronounced deviations from the wild-type enzyme. Further examination of D707A of TB pol I showed no alteration in the processivity or the dideoxynucleotide sensitivity patterns. However, both TB pol D707A and homologous E. coli D732A failed to form a stable E.DNA.dNTP ternary complex. These results suggest that the aspartate in the hinge region is catalytically important and is required for dNTP binding and in the formation of a prepolymerase ternary complex.