Plasmin-mediated macrophage reversal of low density lipoprotein aggregation

Evidence suggests that aggregated low density lipoprotein (AgLDL) accumulates in atherosclerotic lesions. Previously, we showed that AgLDL induces and enters surface-connected compartments (SCC) in human monocyte-derived macrophages by a process we have named patocytosis. Most AgLDL taken up by these macrophages in the absence of serum is stored in SCC and remains undegraded. We now show that macrophages released AgLDL (prepared by vortexing or treatment with phospholipase C or sphingomyelinase) from their SCC when exposed to 10% human lipoprotein-deficient serum (LPDS). Macrophages also took up AgLDL in the presence of LPDS, but subsequently released it. In both cases, the released AgLDL was disaggregated. Although the AgLDL that macrophages took up could not pass through a 0.45-micrometer filter, >60% of AgLDL could pass this filter after release from the macrophages. Disaggregation of AgLDL was verified by gel-filtration chromatography and electron microscopy that also showed particles larger than LDL, reflecting fusion of LDL that aggregates. The factor in serum that mediated AgLDL release and disaggregation was plasmin generated from plasminogen by macrophage urokinase plasminogen activator. AgLDL release was decreased >90% by inhibitors of plasmin (epsilon-amino caproic acid and anti-plasminogen mAb), and also by inhibitors of urokinase plasminogen activator (plasminogen activator inhibitor-1 and anti-urokinase plasminogen activator mAb). Moreover, plasminogen could substitute for LPDS and produce similar macrophage release and disaggregation of AgLDL. Because only plasmin bound to the macrophage surface is protected from serum plasmin inhibitors, interaction of AgLDL with macrophages was necessary for reversal of its aggregation by LPDS. The released disaggregated LDL particles were competent to stimulate LDL receptor-mediated endocytosis in cultured fibroblasts. Macrophage-mediated disaggregation of aggregated and fused LDL is a mechanism for transforming LDL into lipoprotein structures size-consistent with lipid particles found in atherosclerotic lesions.     

Up-regulation of E-cadherin and β-catenin in human hepatocellular carcinoma cell lines by sodium butyrate and interferon-α

Summary Human E-cadherin is a homophilic cell adhesion molecule and its expression is well preserved in normal human hepatocytes; a decrease in its expression has been observed in poorly differentiated hepatocellular carcinoma cells. We examined the alteration of E-cadherin and catenin expressions caused by differentiation inducers in human hepatocellular carcinoma cells. Hepatocellular carcinoma cell lines, HCC-T and HCC-M, were cultured with all-trans retinoic acid (ATRA), dexamethasone (DEX), sodium butyrate, and interferon-α. E-cadherin expression was only up-regulated by butyrate and interferon-α (IFN-α) in both cell lines, studied by means of fluorescence immunostaining and flow cytometry. The localization of E-cadherin staining was shown at their cell membrane. According to the increase in E-cadherin expression, β-catenin expression appeared at the cell membrane of both cell lines when treated with butyrate and IFN-α. Such an appearance was not observed when cells were treated with ATRA and DEX. Western blotting showed that α-and γ-catenin expression was not changed, while only the expression of β-catenin increased. β-Catenin oncogenic activation as a result of amino acid substitutions or interstitial deletions within or including parts of exon 3, which has been demonstrated recently, was not detected in these cell lines by direct deoxyribonucleic acid sequencing. These results suggest that the expression and interaction between E-cadherin and wild-type β-catenin are potentially modulated by butyrate and IFN-α, and that these two agents are potent inhibitors of hepatocellular carcinoma cell invasion and metastasis.     

Oxidative stress and aging in Caenorhabditis elegans

Much attention has been focused on the hypothesis that oxidative damage plays in cellular and organismal aging. A mev-1 (kn1) mutant of Caenorhabditis elegans, isolated on the basis of its methyl viologen (paraquat) hypersensitivity, is also hypersensitive to elevated oxygen levels. Unlike the wild type, its life span decreases dramatically as oxygen concentrations are increased from 1% to 60%. Strains, which bear this mutation, accumulate fluorescent materials and protein carbonyl groups, markers of aging, at faster rates than the wild type. We have cloned mev-1 gene by transformation rescue and found that it is, in fact, the previously sequenced gene (cyt-1) that encodes succinate dehydrogenase cytochrome b. A missense mutation abolishes complex II activity in the mitochondrial membrane but not succinate dehydrogenase enzyme activity per se. These data suggest that CYT-1 directly participates in electron transport from FADH₂ to coenzyme Q. Moreover, mutational inactivation of this process renders animals susceptible to oxidative stress and, as a result, leads to premature aging.     

Redesign of artificial globins: effects of residue replacements at hydrophobic sites on the structural properties

Artificial sequences of the 153 amino acids have been designed to fit the main-chain framework of the sperm whale myoglobin (Mb) structure based on a knowledge-based 3D-1D compatibility method. The previously designed artificial globin (DG1) folded into a monomeric, compact, highly helical and globular form with overall dimensions similar to those of the target structure, but it lacked structural uniqueness at the side-chain level [Isogai, Y., Ota, M., Fujisawa, T. , Izuno, H., Mukai, M., Nakamura, H., Iizuka, T., and Nishikawa, K. (1999) Biochemistry 38, 7431-7443]. In this study, we redesigned hydrophobic sites of DG1 to improve the structural specificity. Several Leu and Met residues in DG1 were replaced with beta-branched amino acids, Ile and Val, referring to the 3D profile of DG1 to produce three redesigned globins, DG2-4. These residue replacements resulted in no significant changes of their compactness and alpha-helical contents in the absence of denaturant, whereas they significantly affected the dependence of the secondary structure on the concentration of guanidine hydrochloride. The analyses of the denaturation curves revealed higher global stabilities of the designed globins than that of natural apoMb. Among DG1-4, DG3, in which 11 Leu residues of DG1 are replaced with seven Ile and four Val residues, and one Met residue is replaced with Val, displayed the lowest stability but the most cooperative folding-unfolding transition and the most dispersed NMR spectrum with the smallest line width. The present results indicate that the replacements of Leu (Met) with the beta-branched amino acids at appropriate sites reduce the freedom of side-chain conformation and improve the structural specificity at the expense of stability.     

Unequal cleavage in the early Tubifex embryo

Unequal cleavage that produces two blastomeres of different size is a cleavage pattern that many animals in a variety of phyla, particularly in Spiralia, adopt during early development. This cleavage pattern is apparently instrumental for asymmetric segregation of developmental potential, but it is also indispensable for normal embryogenesis in many animals. Mechanically, unequal cleavage is achieved by either simple unequal cytokinesis or by forming a polar lobe at the egg's vegetal pole. In the present paper, the mechanisms for unequal cytokinesis involved in the first three cleavages in the oligochaete annelid Tubifex are reviewed. The three unequal cleavages are all brought about by an asymmetrically organized mitotic apparatus (MA). The MA of the first cleavage is monastral in that an aster is present at one pole of a bipolar spindle but not at the other. This monastral form, which arises as a result of the involvement of a single centrosome in the MA assembly, is both necessary and sufficient for unequal first cleavage. The egg cortex during the first mitosis is devoid of the ability to remodel spindle poles. In contrast to the non-cortical mechanisms for the first cleavage, asymmetry in the MA organization at the second and third cleavages depends solely on specialized properties of the cell cortex, to which one spindle pole is physically connected. A cortical attachment site for the second cleavage spindle is generated de novo at the cleavage membrane resulting from the first cleavage; it is an actin-based, cell contact-dependent structure. The cortical microtubule attachment site for the third cleavage, which functions independently of contact with other cells, is not generated at the cleavage membrane resulting from the second cleavage, but is located at the animal pole; it may originate from the second polar body formation and become functional at the 4-cell stage.     

Rapid in vitro propagation of Matteuccia struthiopteris (L.) Todaro – an edible fern

A rapid and efficient in vitro plant regeneration method was developed for Matteuccia struthiopteris (L.) Todaro (Ostrich fern). Side shoots, originating in meristems of sectioned rhizomes, were used as explant material. A very high rate of meristem multiplication was achieved by culturing the explants in half-strength MS liquid medium supplemented with 2.0 mg/l N-(4-Pyridyl)-N′-phenylurea (4-PU) and 0.5 mg/l thidiazuron (TDZ). Multiplication of the shoot primordia was faster in suspension culture than on solid medium. Rhizogenesis and growth of regenerants were best achieved on hormone-free one-quarter-strength MS solid medium amended with 0.4% agar and 1.0% activated charcoal. Regenerated plantlets continued to grow after transfer to soil in a phytotron. Received: 19 March 1998 / Revision received: 17 July 1998 / Accepted: 3 August 1998     

Steady-state force–velocity relation of ATP-dependent sliding between slime mold myosin, arranged on paramyosin filaments, and algal cell actin cables

To investigate characteristics of ATP-dependent sliding of a non-muscle cell myosin, obtained from a cellular slime mold Dictyostelium discoideum, on actin filament, we prepared hybrid thick filaments, in which Dictyostelium myosin was regularly arranged around paramyosin filaments obtained from a molluscan smooth muscle. A single to a few hybrid filaments were attached to a polystyrene bead (diameter, 4.5 μm; specific gravity, 1.5), and the filaments were made to slide on actin filament arrays (actin cables) in the internodal cell of an alga Chara corallina, mounted on the rotor of a centrifuge microscope. The filament-attached bead was observed to move with a constant velocity under a constant external load for many seconds. The steady-state force–velocity relation of Dictyostelium myosin sliding on actin cables was hyperbolic in shape except for large loads ≤0.7–0.8 P₀, being qualitatively similar to that of skeletal muscle fibres, despite a considerable variation in the number of myosin molecules interacting with actin cables. Comparison of the P–V curves between Dictyostelium myosin and muscle myosins sliding on actin cables suggests that the time of attachment to actin in a single attachment–detachment cycle is much longer in Dictyostelium myosin than in muscle myosins.