Determination of free and total S-phenylmercapturic acid by HPLC/MS/MS in the biological monitoring of benzene exposure

Urinary S-phenylmercapturic acid (SPMA) is a biomarker suggested by the American Conference of Governmental Industrial Hygienists (ACGIH) for assessing occupational exposure to benzene. A possible cause of the miscorrelation between environmental monitoring and biological monitoring for benzene exposure, which many authors complain about, is the existence of a urinary metabolite that turns into SPMA by acid hydrolysis. Forty urine samples were tested to determine which concentration value would correspond to the ACGIH Biological Exposure Index (BEI) of 25 µg g^-1 creatinine if exposure assessment was based on the determination of SPMA after quantitative hydrolysis of its precursor. An aliquot of each sample was hydrolysed with 9 M H₂SO₄, a second one was brought to pH 2 and a third one was used as it was (free SPMA). SPMA was determined by high-performance liquid chromatography/tandem mass spectrometric technique (HPLC/MS/MS) using an internal standard. The analytical method was validated in the range 0.5-50 µg l^-1. The average SPMA in pH 2 samples is 45-60% of the total, while free SPMA varies from 1% to 66%. The hydrolysis of pre-SPMA reduces the likelihood of variability in the results by reducing pH differences in urine samples and increasing the amount of measured SPMA. The BEI limit value would be about 50 µg g^-1 creatinine.     

Prediction of stability changes upon mutation in an icosahedral capsid

Identifying the contributions to thermodynamic stability of capsids is of fundamental and practical importance. Here we use simulation to assess how mutations affect the stability of lumazine synthase from the hyperthermophile Aquifex aeolicus, a T = 1 icosahedral capsid; in the simulations the icosahedral symmetry of the capsid is preserved by simulating a single pentamer and imposing crystal symmetry, in effect simulating an infinite cubic lattice of icosahedral capsids. The stability is assessed by estimating the free energy of association using an empirical method previously proposed to identify biological units in crystal structures. We investigate the effect on capsid formation of seven mutations, for which it has been experimentally assessed whether they disrupt capsid formation or not. With one exception, our approach predicts the effect of the mutations on the capsid stability. The method allows the identification of interaction networks, which drive capsid assembly, and highlights the plasticity of the interfaces between subunits in the capsid. Proteins 2015; 83:1733–1741. © 2015 The Authors. Proteins: Structure, Function, and Bioinformatics Published by Wiley Periodicals, Inc     

Liquid chromatography-mass spectrometry assay for quantitation of ifosfamide and its N-deschloroethylated metabolites in rat microsomal medium

A specific and sensitive quantitative assay has been developed using high performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS) for the simultaneous quantitation of the antitumor drug ifosfamide (IFM) and its two metabolites, N2-deschloroethylifosfamide (N2-DCE-IFM) and N3-deschloroethylifosfamide (N3-DCE-IFM) in microsomal medium. The analytes and the internal standard (cyclophosphamide) were isolated by ethylacetate extraction from rat liver microsomes. They were analysed on a Nucleosil C18 HD column (125 mm x 4 mm, 5 microm) using a step gradient with the mobile phase (2 mM ammonium formate and methanol). The HPLC-ESI-MS method used selected ion monitoring of ions m/z 199.1 Th and m/z 261.1 Th and was validated in the concentrations ranges of 100-5000 ng/mL for IFM and 50-2500 ng/mL for its N-deschloroethylated metabolites (DCE-IFM) with good accuracy and precision (CV less than 15%). The low limits of quantitation (LLOQ) were found at 50 ng/mL for N-deschloroethylated metabolites and at 100 ng/mL for the parent drug (IFM). The method was applied for the determination of ifosfamide and its N-deschloroethylated metabolites in rat microsomal incubations.     

The incorporation of glucosamine into enterobacterial core lipopolysaccharide: two enzymatic steps are required

The core lipopolysaccharide (LPS) of Klebsiella pneumoniae is characterized by the presence of disaccharide alphaGlcN-(1,4)-alphaGalA attached by an alpha1,3 linkage to l-glycero-d-manno-heptopyranose II (ld-HeppII). Previously it has been shown that the WabH enzyme catalyzes the incorporation of GlcNAc from UDP-GlcNAc to outer core LPS. The presence of GlcNAc instead of GlcN and the lack of UDP-GlcN in bacteria indicate that an additional enzymatic step is required. In this work we identified a new gene (wabN) in the K. pneumoniae core LPS biosynthetic cluster. Chemical and structural analysis of K. pneumoniae non-polar wabN mutants showed truncated core LPS with GlcNAc instead of GlcN. In vitro assays using LPS truncated at the level of d-galacturonic acid (GalA) and cell-free extract containing WabH and WabN together led to the incorporation of GlcN, whereas none of them alone were able to do it. This result suggests that the later enzyme (WabN) catalyzes the deacetylation of the core LPS containing the GlcNAc residue. Thus, the incorporation of the GlcN residue to core LPS in K. pneumoniae requires two distinct enzymatic steps. WabN homologues are found in Serratia marcescens and some Proteus strains that show the same disaccharide alphaGlcN-(1,4)-alphaGalA attached by an alpha1,3 linkage to ld-HeppII.     

The O-chain structure from the LPS of marine halophilic bacterium Pseudoalteromonas carrageenovora-type strain IAM 12662T

The O-chain polysaccharide of the lipopolysaccharide from the halophilic marine bacterium Pseudoalteromonas carrageenovora IAM 12662T was characterized. The structure was studied by means of chemical analysis and 2D NMR spectroscopy of the de-O-acylated lipopolysaccharide and shown to be the following:Col is colitose, 3,6-di-deoxy-L-xylo-hexose.     

Structure of minor oligosaccharides from the lipopolysaccharide fraction from Pseudomonas stutzeri OX1

A minor oligosaccharide fraction was isolated after complete de-acylation of the lipooligosaccharide extracted from Pseudomonas stutzeri OX1. The full structure of this oligosaccharide was obtained by chemical degradation, NMR spectroscopy and MALDI-TOF MS spectrometry. These experiments showed the presence of two novel oligosaccharides (OS1 and OS2): [structure: see text] where R=(S)-Pyr(-->4,6) in OS1 and alpha-Rha-(1-->3) in OS2. All sugars are D-pyranoses, except Rha, which is L-pyranose. Hep is L-glycero-D-manno-heptose, Kdo is 3-deoxy-D-manno-oct-2-ulosonic acid, Pyr is pyruvic acid, P is phosphate.     

Comparison of the transition states for folding of two Ig-like proteins from different superfamilies

In the "fold approach" proteins with a similar fold but different sequences are compared in order to investigate the relationship between native state structure and folding behaviour. Here we compare the properties of the transition states for folding of TI I27, the 27th immunoglobulin domain from human cardiac titin, and that of TNfn3, the third fibronectin type III domain from human tenascin. Experimental phi-values were used as restraints in molecular dynamics simulations to determine the structures that make up the transition state ensembles (TSEs) for folding of the two proteins. The restrained simulations that we present allow a detailed structural comparison of the two TSEs to be made. Further calculations show explicitly that for both proteins the formation of the interactions involving the residues in the folding nucleus is sufficient for the establishment of the topology of the Ig-like fold. We found that, although the folding nuclei of the two proteins are similar, the packing of the folding nucleus of TI I27 is much tighter than that of TNfn3, reflecting the higher experimental phi-values and beta(T) (Tanford Beta) of TI I27. These results suggest that the folding nucleus can be significantly deformed to accommodate extensive sequence variation while conserving the same folding mechanism.     

Vertebral body innervation: Implications for pain

Vertebral fractures often cause intractable pain. To define the involvement of vertebral body innervation in pain, we collected specimens from male and female patients during percutaneous kyphoplasty, a procedure used for reconstruction of the vertebral body. Specimens were taken from 31 patients (9 men and 22 women) suffering high‐intensity pain before surgery. In total, 1,876 histological preparations were obtained and analysed. Immunohistochemical techniques were used to locate the nerves in the specimens. The nerve fibres were labelled by indirect immunofluorescence with the primary antibody directed against Protein Gene Product 9.5 (PGP 9.5), a pan‐neuronal marker; another primary antibody directed against type IV collagen (Col IV) was used to identify vessels and to determine their relationship with vertebral nerve fibres. The mean percentage of samples in which it was possible to identify nerve fibres was 35% in men and 29% in women. The percentages varied depending on the spinal level considered and the sex of the subject, nerve fibres being mostly present around vessels (95%). In conclusion, there is scarce innervation of the vertebral bodies, with a clear prevalence of fibres located around vessels. It seems unlikely that this pattern of vertebral body innervation is involved in vertebral pain or in pain relief following kyphoplasty. J. Cell. Physiol. 222: 488–491, 2010. © 2009 Wiley‐Liss, Inc.