The investigations on HIV-1 gp120 bound with BMS-488043 by using docking and molecular dynamics simulations

BMS-488043, like its predecessor BMS-378806, is a small molecule that can block the interactions between gp120 and CD4, and has shown good clinical efficacy. However, the crystal structure of drug-gp120 complexes or the full-length gp120 free of bound ligand is unpublished until now. Docking combined with molecular dynamics simulation is used to investigate the binding mode between BMS-488043 and gp120. On the basis of the analysis of the simulated results, the plausible binding mode is acquired, such as the changes of binding mode in the trajectory and the calculated binding free energy. Subsequently, a number of residues which make contacts with the small molecule are studied by binding free energy decomposition to understand the mutation experiments, such as Trp427, Ser375, and Thr257 residues with the help of the acquired binding mode above. Especially, the importance of the hydrophobic groove formed by residues Ile371 and Gly472 which bind BMS-488043 is elaborated, which has not been explored much. In addition, theoretical investigations on the dynamics behavior of the gp120 associated with BMS-488043 enhanced binding are performed; the results indicate that the BMS-488043 may be more deeply inserted into the Phe43 cavity compared with the previous binding mode acquired by docking.     

Theoretical investigations on the synthesis mechanism of cyanuric acid from NH3 and CO2

In the synthesis of cyanuric acid from NH₃ and CO₂, urea and isocyanic acid OCNH are two pivotal intermediates. Based on density functional theory (DFT) calculations, the synthesis mechanism of cyanuric acid from NH₃ + CO₂ was investigated systematically. Urea can be synthesized from NH₃ and CO₂, and cyanuric acid can be obtained from urea or NH₃ + CO₂. In the stepwise mechanism of cyanuric acid from urea or NH₃ + CO₂, the energy barriers are relatively high, and the condition of high pressure and temperature does not decrease the energy barriers. Our theoretical model shows that cyanuric acid is actually acquired from OCNH via a one-step cycloaddition reaction.

Theoretical studies on the crystal structure, thermodynamic properties, detonation performance and thermal stability of cage-tetranitrotetraazabicyclooctane as a novel high energy density compound

The B3LYP/6-31G (d) method of density functional theory (DFT) was used to study molecular geometry, electronic structure, infrared spectrum (IR) and thermodynamic properties. The heat of formation (HOF) and calculated density were estimated to evaluate the detonation properties using Kamlet–Jacobs equations. Thermal stability of 3,5,7,10,12,14,15,16-octanitro- 3,5,7,10,12,14,15,16-octaaza-heptacyclo[7.5.1.1^2,8.0^1,11.0^2,6.0^4,13.0^6,11]hexadecane (cage-tetranitrotetraazabicyclooctane) was investigated by calculating the bond dissociation energy (BDE) at unrestricted B3LYP/6-31G (d) level. The calculated results show that the N–NO₂ bond is a trigger bond during thermolysis initiation process. The crystal structure obtained by molecular mechanics (MM) methods belongs to Pna2₁ space group, with cell parameters a?=?12.840 Å, b?=?9.129 Å, c?=?14.346 Å, Z?=?6 and ρ?=?2.292 g·cm^?3. Both the detonation velocity of 9.96 km·s^?1 and the detonation pressure of 47.47 GPa are better than those of CL-20. According to the quantitative standard of energetics and stability, as a high energy density compound (HEDC), cage-tetranitrotetraazabicyclooctane essentially satisfies this requirement.     

Theoretical study of the triangular bonding complex formed by carbon tetrabromide, a halide, and a solvent molecule in the gas phase

MP2(full)/aug-cc-pVDZ(-PP) computations predict that new triangular bonding complexes (where X^? is a halide and H–C refers to a protic solvent molecule) consist of one halogen bond and two hydrogen bonds in the gas phase. Carbon tetrabromide acts as the donor in the halogen bond, while it acts as an acceptor in the hydrogen bond. The halide (which commonly acts as an acceptor) can interact with both carbon tetrabromide and solvent molecule (CH₃CN, CH₂Cl₂, CHCl₃) to form a halogen bond and a hydrogen bond, respectively. The strength of the halogen bond obeys the order CBr₄???Cl^? > CBr₄???Br^? > CBr₄???I^?. For the hydrogen bonds formed between various halides and the same solvent molecule, the strength of the hydrogen bond obeys the order C-H???Cl^? > C-H???Br^? > C-H???I^?. For the hydrogen bonds formed between the same halide and various solvent molecules, the interaction strength is proportional to the acidity of the hydrogen in the solvent molecule. The diminutive effect is present between the hydrogen bonds and the halogen bond in chlorine and bromine triangular bonding complexes. Complexes containing iodide ion show weak cooperative effects.

Low Electron Scattering Potentials in High Performance Mg2Si0.45Sn0.55 Based Thermoelectric Solid Solutions with Band Convergence

Understanding the electron and phonon transport characteristics is crucial for designing and developing high performance thermoelectric materials. Weak scattering effects on charge carriers, characterized by deformation potential and alloy scattering potential, are favorable for thermoelectric solid solutions to enable high carrier mobility and thereby promising thermoelectric performance. Mg₂(Si,Sn) solid solutions have attracted much attention due to their low cost and environmental compatibility. Usually, their high thermoelectric performance with ZT ～ 1 is ascribed to the band convergence and reduced lattice thermal conductivity caused by alloying. In this work, both a low deformation potential Ξ = 13 eV and a low alloy scattering potential U = 0.7 eV are found for the thermoelectric alloys by characterizing and modeling of thermoelectric transport properties. The band convergence is also verified by the increased density‐of‐states effective mass. It is proposed that, in addition to band convergence and reduced lattice thermal conductivity, the low deformation potential and alloy scattering potential are additional intrinsic features that contribute to the high thermoelectric performance of the solid solutions.     

A simple method to estimate the exponential material parameters of heart valve tissue based on analogy between uniaxial tension and micropipette aspiration

Micropipette aspiration (MA) has been widely used to measure the biomechanical properties of cells and biomaterials. To estimate material parameters from MA experimental data, analytical half-space models and inverse finite element (FE) analyses are typically used. The half-space model is easy to implement but cannot account for nonlinear material properties and complex geometrical boundary conditions that are inherent to MA. Inverse FE approaches can account for geometrical and material nonlinearities, but their implementation is resource-intensive and not widely available. Here, by making analogy between an analytical uniaxial tension model and a FE model of MA, we proposed an easily implementable and accurate method to estimate the material parameters of tissues tested by MA. We first adopted a strain invariant-based isotropic exponential constitutive model and implemented it in both the analytical uniaxial tension model and the FE model. The two models were fit to experimental data generated by MA of porcine aortic valve tissue (45 spots on four leaflets) to estimate material parameters. We found no significant differences between the effective moduli estimated by the two models ( $p > 0.39$ ), with the effective moduli estimated by the uniaxial tension model correlating significantly with those estimated by the FE model ( $p < 0.001; R^{2}= 0.96$ ) with a linear regression slope that was not different than unity ( $p = 0.38$ ). Thus, the analytical uniaxial tension model, which avoids solving resource-intensive numerical problems, is as accurate as the FE model in estimating the effective modulus of valve tissue tested by MA.     

Suppressed Optical Transmission Through an Array of Ultrathin Interlayer Metal Slits

In contrast to the enhanced peak transmission in a subwavelength metal hole array structure (Ebbesen et al., Nature 391:667–669, 1998), here we theoretically investigate the spectral transmission through an array of identical metal slits with ultrathin interlayers and surprisingly find the depressed optical transmission for both infinite and finite array case. Notably, in the latter system, the narrowband dip transmission is evidently produced with the accompaniment of selective field enhancement and phase jumping across the structure. Analyses suggest that this phenomenon is intrinsically related to the penetrant coupling of intracavity surface plasmon polaritons together with the slit termination effect.     

Plasmonic Spectral Detection of Carcinoembryonic Antigen by Preventing the Direct Binding of Rhodamine 6G with Au Nanoparticles

Carcinoembryonic antigen (CEA) was used as a separator to prevent the Rhodamine 6G (R6G)-induced aggregation of colloidal gold nanoparticles. The destroyed aggregation has been monitored by measuring the absorption and resonance light scattering peaks corresponding to the longitudinal surface plasmon resonance (SPR) of the chain-like aggregated gold nanoparticles (AuNPs). It was found that the pre-adding of CEA with different concentrations to the gold colloids before mixing them with R6G could lead to the longitudinal SPR peak decrease and blue shift. By analysing the intensity changing and wavelength shifting of the absorption spectra, CEA could be detected in a linear range from 0.2 to 4 ng/mL, and the limit of detection reaches to 0.1 ng/mL. The sensitivity of the CEA concentration dependent shifting and quenching of the plasmonic absorption and scattering corresponding to the AuNPs aggregation presents a well potential application of biologic spectral sensing.